Joy-it RB-StromPi3-Case Bruksanvisning
Joy-it
Computerbehuizing
RB-StromPi3-Case
Les nedenfor 📖 manual på norsk for Joy-it RB-StromPi3-Case (11 sider) i kategorien Computerbehuizing. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/11
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
S
S
S
SSTROMPI 3 CASE
TROMPI 3 CASE
TROMPI 3 CASE
TROMPI 3 CASETROMPI 3 CASE
RB-StromPi3-Case
1. GENERAL INFORMATION
1. GENERAL INFORMATION
1. GENERAL INFORMATION
1. GENERAL INFORMATION1. GENERAL INFORMATION
Dear costumer,
Thank you for buying our product. The structure and functions of the
StromPi3 are explained in the following chapters. We show you which
settings must be adjusted that the Raspberry Pi will work with the Strom-
Pi perfectly.
If you get any diiculties with the usage with the device, do not hesitate
to conact us.
This high quality aluminium case oers space for your Raspberry Pi incl. -
StromPi 3 and Battery Hat ( XL also). A removable cover above the GPIO bar -
keeps it easily accessible.
The RB StromPi3 PCB allows the use of the power button function. In additi-- -
on, the fan can be operated with this board and optionally controlled.
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
2. ASSEMBLY OF THE HOUSING
2. ASSEMBLY OF THE HOUSING
2. ASSEMBLY OF THE HOUSING
2. ASSEMBLY OF THE HOUSING2. ASSEMBLY OF THE HOUSING
First you have to make sure which revision of the StromPi you have, you
can use these pictures for reference:
Rev. 1.0 Rev. 1.1
Please note that if you own the and want to use the PowerOnBut-
Rev
Rev
Rev
Rev Rev 1.0
1.0
1.0
1.0 1.0
ton function, you must first perform the PowerOnButton modification
described in the StromPi3 manual.
In this modification is already integrated.
Rev 1.1
Rev 1.1
Rev 1.1
Rev 1.1 Rev 1.1
The case is delivered with the Raspberry Pi 4 side panels already screwed
on and must first be disassembled.
If you want to install a Raspberry Pi 3, you have to remove all parts.
If you want to use a Raspberry Pi 4, you can leave the side panel for the
HDMI and power connections installed.
In both cases the fan must also be removed first.
Now screw the spacers with the nuts to your Raspberry Pi.
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
Now put on the two plastic spacers, as shown in the picture.
Also remove the foil from the aluminium heat sink and put it on the CPU
of the Raspberry Pis.
Now place your StromPi on the Raspberry Pi and connect the cable for
the wide range power supply. -
Please note that, depending on the cable you use for this, you will have to
insert it already through the hole provided in the back panel.
Also Connect the included cable to the reset pins of your StromPis as
shown in the picture below. With the Rev 1.1 these are labeled Power On.
Produkspesifikasjoner
| Merke: | Joy-it |
| Kategori: | Computerbehuizing |
| Modell: | RB-StromPi3-Case |
Trenger du hjelp?
Hvis du trenger hjelp med Joy-it RB-StromPi3-Case still et spørsmål nedenfor, og andre brukere vil svare deg
Computerbehuizing Joy-it Manualer
28 Desember 2024
Computerbehuizing Manualer
- Computerbehuizing Gigabyte
- Computerbehuizing AeroCool
- Computerbehuizing ZOTAC
- Computerbehuizing Lian Li
- Computerbehuizing Zalman
- Computerbehuizing Thermaltake
- Computerbehuizing DeepCool
- Computerbehuizing Supermicro
- Computerbehuizing MSI
- Computerbehuizing Xigmatek
- Computerbehuizing Cougar
- Computerbehuizing Advantech
- Computerbehuizing ModeCom
- Computerbehuizing ADATA
- Computerbehuizing Fractal Design
- Computerbehuizing Savio
- Computerbehuizing Antec
- Computerbehuizing Logic
- Computerbehuizing Jonsbo
- Computerbehuizing Kolink
- Computerbehuizing AZZA
- Computerbehuizing Akasa
Nyeste Computerbehuizing Manualer
6 Januar 2025
6 Januar 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
4 Januar 2025
3 Januar 2025
3 Januar 2025
2 Januar 2025