Kicker 10PS52504 Bruksanvisning

Kicker Høyttaler 10PS52504

Les nedenfor 📖 manual på norsk for Kicker 10PS52504 (12 sider) i kategorien Høyttaler. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/12
PS COAXIALS
PS5250 | PS52504
English Version
Versión Español
Altavoces Coaxiales PS
Deutsche Version
PS Koaxial-Lautsprecher
Version Francaise
Haut-parleurs Coaxiale PS
LIVIN’ LOUD
2PS COAXIALS
PS COAXIAL SPEAKERS
Owner’s Manual
PERFORMANCE
Authorized KICKER Dealer:
Purchase Date:
Woofer Size 5-1/4” [133mm]
Tweeter Size 3/4” [20mm]
Frequency Response 60Hz–20kHz
Max Amplifi er Power 100W PEAK | 50W RMS
Sensitivity [1W/1m] 88.3dB
Nominal Impedance 2 (PS5250), 4 (PS52504)Ω Ω
Weight 12.6oz [358g]
Mounting Hole Diameter 4-7/8” [124mm]
Mounting Depth 2-3/16” [56mm]
2 PS5250 Harley-Davidson® with premium audio system and similar touring bikesΩ2006–present
4 PS52504 Harley-Davidson with premium audio system [Ω1998–2005 Road Glide may require Harley-
Davidson parts 77021-98B and 77022-98B]
2008–present Victory
Please refer to your bike’s factory service manual for dissassembly/installation information. Typically, you should
retain all factory screws, hardware, and grilles when upgrading your bike to a KICKER system. The following
diagrams show how to install the PS5250 speakers in a Harley-Davidson bike with “batwingstyle fairing (2006–
present). Note: Do not install in systems that are not 2-ohm stable!
1. Remove front side of fairing.
7 x Torx T25
12
57
4 6
3
3
3. Prepare PS5250 for installation.
Install the KICKER badges onto the grilles; bend the rear posts to secure them in place.
For Harley “batwinginstallations, replace the factory grilles with KICKER grilles.
For all other Harley applications, use the factory grilles only.
2. Remove factory speakers.
Remove the factory speaker connectors.
Retain the 3 factory screws.
Remove the factory speakers from the factory angle mount (be careful not to damage the angle mount).
4. Install PS5250 in factory location.
Use the 3 factory screws.
Connect the factory speaker connectors to the PS5250 terminals.
Re-install your bikes front fairing in the reverse order you disassembled it.
factory speaker location
[ viewed from front of bike ]
factory speaker connectors
factory screws x 3
KICKER grille
recommended
badge location
factory angle
mount
factory grille
(remove for “batwing” only)
install short screw at
bottom
KICKER PS5250

Produkspesifikasjoner

Merke: Kicker
Kategori: Høyttaler
Modell: 10PS52504

Trenger du hjelp?

Hvis du trenger hjelp med Kicker 10PS52504 still et spørsmål nedenfor, og andre brukere vil svare deg




Høyttaler Kicker Manualer

Høyttaler Manualer

Nyeste Høyttaler Manualer