Kicker KXMA1500.1 Bruksanvisning
Les nedenfor 📖 manual på norsk for Kicker KXMA1500.1 (40 sider) i kategorien Mottaker. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/40
KXMA1500.1
Manual del Propietario | Español
AMPLIFICADOR DEL LA SERIE KXM
Benutzerhandbuch | Deutsch
STEREOVERSTÄRKER DER KXM-SERIE
Manuel d’utilisation | Française
AMPLIFICATEUR DE SÉRIE KXM
KXM
AMPLIFIERS
Owner’s Manual
2024 KXMA Mono Amp Rev F.indd 1
2024 KXMA Mono Amp Rev F.indd 1
2024 KXMA Mono Amp Rev F.indd 1
2024 KXMA Mono Amp Rev F.indd 1
2024 KXMA Mono Amp Rev F.indd 1 5/21/2024 11:18:18 AM
5/21/2024 11:18:18 AM
5/21/2024 11:18:18 AM
5/21/2024 11:18:18 AM
5/21/2024 11:18:18 AM
2
KXMA MONO-SERIES AMPLIFIERS
OWNER’S MANUAL
INSTALLATION
Mounting: Choose a structurally sound location to mount your KICKER amplifi er. Make sure there are no
items behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm)
of open ventilation for the amplifi er. If possible, mount the amplifi er in the climate-controlled passenger
compartment. Drill four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the
amplifi er.
Wiring: The KXMA amplifi er’s RCA inputs will receive either high or low level signals from your car stereo’s
source unit. A high-level signal can be run from the source unit’s speaker outputs to the stereo RCA
input on the end panel of the amplifi er using the KICKER KISL as shown. Alternatively, the signal can be
delivered to the amplifi er using the low-level RCA outputs on the source unit. Keep the audio signal cable
away from factory wiring harnesses and other power wiring. If you need to cross this wiring, cross it at a
90 degree angle.
PERFORMANCE
MODEL: KXMA1500.1
IMPORTANT SAFETY WARNING
PROLONGED CONTINUOUS OPERATION OF AN AMPLIFIER, SPEAKER, OR SUBWOOFER IN
A DISTORTED, CLIPPED OR OVER-POWERED MANNER CAN CAUSE YOUR AUDIO SYSTEM
TO OVERHEAT, POSSIBLY CATCHING FIRE AND RESULTING IN SERIOUS DAMAGE TO YOUR
COMPONENTS AND/OR VEHICLE. AMPLIFIERS REQUIRE UP TO 4 INCHES (10CM) OPEN
VENTILATION. SUBWOOFERS SHOULD BE MOUNTED WITH AT LEAST 1 INCH (2.5CM) CLEARANCE
BETWEEN THE FRONT OF THE SPEAKER AND ANY SURFACE.
Model: KXMA1500.1
RMS Power
@ 14.4V, 4Ω mono, ≤ 1% THD+N
@ 14.4V, 2Ω mono, ≤ 1% THD+N
@ 14.4V, 1Ω mono, ≤ 1% THD+N
750W x 1
1500W x 1
1500W x 1
Length [in, cm] 11-3/16, 28.4
Height [in, cm] 2-1/8, 5.5
Width [in, cm] 8-5/16, 21
Frequency Response [Hz] 10Hz–160Hz
Signal-to-Noise Ratio [dB]
1W Signal-to-Noise Ratio [dB]
>95dB, A-weighted, re: rated power
-75dB
Input Sensitivity Low Level: 125mV–5V
High Level: 250mV–10V
Subsonic Filter 10Hz–80Hz, 24dB/octave (BW)
Selectable Electronic Crossover Variable LP 40–160Hz, 24dB/octave (BW)
KickEQ+™ Bass Boost 0–6dB @ 20Hz–80Hz
Remote Bass Yes (Included)
2024 KXMA Mono Amp Rev F.indd 2
2024 KXMA Mono Amp Rev F.indd 2
2024 KXMA Mono Amp Rev F.indd 2
2024 KXMA Mono Amp Rev F.indd 2
2024 KXMA Mono Amp Rev F.indd 2 5/21/2024 11:18:23 AM
5/21/2024 11:18:23 AM
5/21/2024 11:18:23 AM
5/21/2024 11:18:23 AM
5/21/2024 11:18:23 AM
3
Install a fuse within 7” (18cm) of the battery and in-line with the power cable connected to your amplifi er.
Use only KICKER KMPK Wiring Kits or other genuine KICKER marine accessories when installing
amplifi ers in marine applications.
POWER WIRING
source unit
high-level speaker
outputs
to amplifi er
shield
+
–
core conductor KICKER KISL (optional)
from source unit high-
level speaker outputs
OR
to amplifi er
Model External Fuse Power/Ground Wire(sold separately)
KXMA1500.1 1 x 150 Ampere 1/0 Gauge
+
POWER
GND 12V INPUT OUTPUT
SPEAKER
REM AUTO
TURN-ON
L
R
INPUT LEVEL
12V/DC/AUDIO
REMOTE BASS
LOW/HI/
-
12V
battery
external fuse
remote turn-on (see page 7)
≤7”
(18cm)
ABYC-compliant power terminals Amplifi er uses 304-stainless steel screws
and conformal coated PCB for increased
weather resistance
aluminum bottom plate
2024 KXMA Mono Amp Rev F.indd 3
2024 KXMA Mono Amp Rev F.indd 3
2024 KXMA Mono Amp Rev F.indd 3
2024 KXMA Mono Amp Rev F.indd 3
2024 KXMA Mono Amp Rev F.indd 3 5/21/2024 11:18:23 AM
5/21/2024 11:18:23 AM
5/21/2024 11:18:23 AM
5/21/2024 11:18:23 AM
5/21/2024 11:18:23 AM
Produkspesifikasjoner
| Merke: | Kicker |
| Kategori: | Mottaker |
| Modell: | KXMA1500.1 |
Trenger du hjelp?
Hvis du trenger hjelp med Kicker KXMA1500.1 still et spørsmål nedenfor, og andre brukere vil svare deg
Mottaker Kicker Manualer
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Mottaker Manualer
- Mottaker Vonyx
- Mottaker Jensen
- Mottaker Hartke
- Mottaker Goobay
- Mottaker Kogan
- Mottaker Sony
- Mottaker Yamaha
- Mottaker NuPrime
- Mottaker AudioControl
- Mottaker Rotel
- Mottaker Toa
- Mottaker VMV
- Mottaker S.M.S.L
- Mottaker OSD Audio
- Mottaker DataVideo
- Mottaker Audizio
- Mottaker Blackstar
- Mottaker Aplic
- Mottaker CSL
- Mottaker Yorkville
- Mottaker JBL
- Mottaker Bellari
- Mottaker Match
- Mottaker A-NeuVideo
- Mottaker Monitor Audio
- Mottaker Peavey
- Mottaker Fosi Audio
- Mottaker Russound
- Mottaker Black Hydra
- Mottaker Electro-Voice
- Mottaker JL Audio
- Mottaker Audiolab
- Mottaker Memphis Audio
- Mottaker Primare
- Mottaker Kramer
- Mottaker ATen
- Mottaker Musical Fidelity
- Mottaker RDL
- Mottaker Dynacord
- Mottaker Ferguson
- Mottaker REL Acoustics
- Mottaker Inovonics
- Mottaker BZBGear
- Mottaker Ram Audio
- Mottaker Phoenix Gold
- Mottaker HiFi ROSE
- Mottaker Intelix
- Mottaker Comprehensive
- Mottaker Fiio
- Mottaker Lab Gruppen
- Mottaker GlobalSat
- Mottaker AVMATRIX
Nyeste Mottaker Manualer
28 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024