Kogan KAACCHWKITA Bruksanvisning

Kogan Dashcam KAACCHWKITA

Les nedenfor 📖 manual på norsk for Kogan KAACCHWKITA (7 sider) i kategorien Dashcam. Denne guiden var nyttig for 6 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/7
Hardwire Kit for Dash Cameras
KAACCHWKITA
Installation
1. Open the fuse box. The location of the fuse box will differ depending on the car.
2. Locate the ACC+ and BAT+ fuse slots.
3. Connect the red wire to the ACC+ fuse slot. For 24-hour surveillance, connect the
yellow wire to the BAT+ fuse slot. To only record when the car is on, connect the
yellow wire to the ACC+ fuse slot.
4. Connect the black wire to a ground.
Note
It is highly recommended to have this hardwire kit installed by a licenced auto
electrician.
5. Connect the hardwire kit to the dash camera and ensure it powers on.
6. Route the camera cable through the vehicle’s ‘A’ pillar trim.
ACC Wiring Diagram
Output 5V
Acc+
Acc+
Ground
Red connects to the ACC fuse slot
Yellow connects to the ACC fuse slot
Black wire to vehicle ground
Ignition

Produkspesifikasjoner

Merke: Kogan
Kategori: Dashcam
Modell: KAACCHWKITA

Trenger du hjelp?

Hvis du trenger hjelp med Kogan KAACCHWKITA still et spørsmål nedenfor, og andre brukere vil svare deg