Kramer ACC3-12-SP Bruksanvisning

Les nedenfor 📖 manual på norsk for Kramer ACC3-12-SP (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
ACC3- -12 SP Quick Start
P/N:
2900- 301681QS
Rev:
2
Scan for full manual
Step 1: Check in the bwhat’s ox
ACC3- -12 SP 1:2 CAT Cable Splitter
1 Bracket set
4 Rubber feet
1 Quick start guide
Step 2: Get to know your ACC3- - 12 SP
#
Feature
Function
1
CAT A+B -45 Port RJ
Connect to a compatible CAT transmitter (for example an ) to send SWT3- -U-T41
combined signals over the A+B port.
Make sure the Dual CAT extension is set to active via CAT transmitter
embedded webpages.
2
CAT A RJ-45 Port
Connect to a compatible CAT receiver (for example an EXT3- -RUE , EXT3-U-R).
3
CAT B RJ-45 Port
Connect to a compatible CAT receiver (for example an EXT3- -RUE , EXT3-U-R).
Step 3: Mount ACC3- - 12 SP
Install using one of the following methods: ACC3- -12 SP
Attach the rubber feet and place the unit on a at surface.
Fasten a bracket (included) on each side of the unit and attach it to a at surface
(see
www.kramerav.com/downloads/ACC3- -12 SP).
Mount the unit in a rack using the recommended rack adapter
(see
www.kramerav.com/product/ACC3- -12 SP).
Ensure that the environment (e.g., maximum ambient temperature &
air ow) is compatible for the device.
Avoid uneven mechanical loading.
Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
Reliable earthing of rack-mounted equipment should be maintained.
Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your . ACC3- -12 SP

Produkspesifikasjoner

Merke: Kramer
Kategori: Ikke kategorisert
Modell: ACC3-12-SP

Trenger du hjelp?

Hvis du trenger hjelp med Kramer ACC3-12-SP still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Kramer Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer