Kramer OSP-SM10S Bruksanvisning

Les nedenfor 📖 manual på norsk for Kramer OSP-SM10S (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
OSP-SM10S Quick Start
P/N:
2900- 301238QS
Rev:
1
Scan for full manual
OSP-SM10S Quick Start Guide
This guide helps you install and use your OSP-SM10S for the first time.
Go to www.kramerav.com/downloads/OSP-SM10S to download the latest user manual and check if
rmware upgrades are available.
Step 1: Check in the b what’s ox
2 OSP-SM10S 10G SFP+ Simplex Transceivers (A and B)
1 Quick start guide
Step 2: Get to know your -SM10S OSP
#
Feature
Function
1
LC Connectors
For connecting ber optic cable. Covered with protective cap when not in use.
2
Bail (Handle)
Pull down the handle for easy removal of the transceiver from the optical device.
3
Protective Cap
Protects the LC connector from dust.
Note: When transporting or storing an unconnected device, keep the cap on to protect
against dust.
4
SFP+ Module Interface
Connects to the optical module SFP+ port.
Step 3: Safety Instructions
Warning: Class 1 Laser Product:
Invisible laser radiation present.
Avoid long-term viewing of laser.
Avoid the use of magnifying viewing aids or instruments (such as binoculars, telescopes,
microscopes and magnifying lenses, but not spectacles or contact lenses).
Avoid placing optical devices in the emitted beam that could cause the concentration of the
laser radiation to be increased.
Ensure that the environment (e.g., maximum ambient temperature &
air ow) is compatible for the device.
Avoid uneven mechanical loading.
Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
Reliable earthing of rack-mounted equipment should be maintained.
Step 4: Operation and Installation Warnings
designed to be used with LC(PC) and LC(UPC) cable connectors. Using an LC(APC) connector
OSP-SM10S is
causes poor performance and can damage the optical module connector.
Always inspect and clean the connectors before you make a connection.
Always use the connector housing to plug or unplug a ber cable.
Never touch the end face of the ber connectors.
Step 5: Install the OSP-SM10S
Always install transceiver to one extension device and transceiver B to the other A
extension pairing device.
To install the 10G SFP+ Simplex Transceiver:
1. Make sure the bail is pushed up, in the closed position.
2. Insert the OSP SFP+ transceiver into the relevant optical device SFP+ slot
and push it in until it clicks.
3. Before connecting the optical ber cable, remove the protective cap and store
it in a safe place for future use.
To remove the 10G SFP+ Simplex Transceiver:
1. Pull the bail down to release the transceiver unit.
2. Pull the transceiver unit out by the bail from the optical device SFP+ slot.
3. If needed, put the protective cap back on.
For optimum range and performance use the recommended Kramer cables available at
www.kramerav.com/product/OSP-SM10S. Using third-party cables may cause damage!
Step 6: Technical Specications
Transceiver Wavelength:
A: 1270 DFB transmitter /1330 receiver nm
B: 1330 DFB transmitter /1270 receiver nm
Optical Fiber Line Type:
Single-mode
Optical Transmitter Type:
DFB
Typical Optical Transmission Power:
-5dBm
Typical Optical Maximum Receiver
Sensitivity:
-14dBm
Typical Optical Maximum Loss Budget:
9dB
Ports:
1 strand ber optic LC (PC/UPC) connector for reception and transmission
SFP+ compliant pluggable interface
Note: Do not use with LC(APC) connectors.
Data Rate:
10Gbps
Maximum Reach
24km
Standards Compliance:
IEEE 802.3 , SFF-8431, SFF- AE 8472
Laser Safety Compliance:
Laser Class I
Regulatory Certications:
FDA: CDRH 1040.10
TUV: EN60950-1:2006+A11+A1+A12+A2; EN60825-1:2014; EN60825-
2:2004+A1+A2
UL: 60950-1; CSA C22.2 No. 60950-1-07:2014
EMC CE: EN 55032:2010; EN 55024:2010
CB: IEC 60950-1 2nd Edition :2014
RoHS: Directive 2011/65/EU
Operating Temperature:
0° to 70°C
Storage Temperature:
-40° to 85°C
Humidity:
5% to 95% RH
Power Consumption:
1W
Product Dimensions:
1.33cm x 5.7cm x 0.85cm (0.52" x 2.2" x 0.33") W, D, H
Product Weight:
0.018kg (0.04lbs)
Shipping Dimensions:
4.1cm x 12.6cm x 8.4cm (1.6" x 5" x 3.3") W, D H ,
Shipping Weight:
0.06kg (0.13lbs)
Specications are subject to change without notice at www.kramerav.com

Produkspesifikasjoner

Merke: Kramer
Kategori: Ikke kategorisert
Modell: OSP-SM10S

Trenger du hjelp?

Hvis du trenger hjelp med Kramer OSP-SM10S still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Kramer Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer