Kramer RK-UT1 Bruksanvisning

Les nedenfor 📖 manual på norsk for Kramer RK-UT1 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 5 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
RK-UT1 Quick Start (P/N: 2900- 896QS REV 1)300
P/N:
2900- 300896QS
Rev:
1
Scan for full manual
RK-UT1 Quick Start Guide
This guide helps you install and use your RK-UT1 for the first time.
Go to www.kramerav.com/downloads/ -UT1RK to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the b ox
RK-UT1 Under the Table Enclosure
1 Quick start guide
20 M3x5 screws
Step 2: Get to know your - RK UT1
Mount any of the following combinations of Kramer
1U products (1/2-19" 1U units, 1/4-19" 1U units, 1/8-
19" 1U units and separately, up to two 6.5"-1U units)
in the rack adapter. If empty spaces remainRK-UT1 ,
you can close them with blank panels (optional).
Step 3: Mount devices onto the - RK UT1
The underside TOOL mounting area RK-UT1
includes a set of screw holes that are suitable for
any combination of units.
To mount a unit on the -UT1: RK
1. Place the rst unit on the rack (for example, the
Kramer ). PA-120Z
2. While holding the PA-120Z in place, ip over the
RK-UT1.
3. Attach the appropriate number of M3x5 screws
(supplied through the holes on the to the ) RK-UT1
underside of the . PA-120Z
4. Repeat steps 1 to 3 for all additional devices.
To install the -UT1 underneath a table: RK
1. Place the unit the underside of a table and mark on
the correct location (of the table mounting screw
holes).
2. Insert the six M4.2X18 wood screws (supplied) into
the six rim screw holes (three on each side) and
tighten them to attach the to the table. RK-UT1
If your Kramer device not have screw holes on its does
underside, mount it via the screw holes on the sides of
the . RK-UT1
To mount a blank panel (optional) to cover any empty
rack spaces:
1. Place the blank panel in place.
2. Insert two M3x5 screws through the holes on the
RK-UT1 that t the holes on the blank panel
(optional, not supplied).
Technical Specifications
Environmental
Conditions
Temperature Range
-40° to +70°C (-40° to 158°F)
Humidity
10% to 90%, RHL non-condensing
Regulatory Compliance
Safety
CE
Environmental
RoHs, WEEE
Enclosure
Type
Aluminum
General
Net Dimensions
19-inch (W), 7-inch (D) 1U (H)
Shipping Dimensions (W, D, H)
49.5cm x 20.2cm x 5 cm
(19.5" x 7 5" x 1 7") .9 .9
Net Weight
2.18kg (4.8lbs)
Shipping Weight
2.88kg (6 5lbs) approx. .3
Accessories
Included
20 M3x5 screws, 6 M4.2X18 wood screws
Specications are subject to change without notice at www.kramerav.com

Produkspesifikasjoner

Merke: Kramer
Kategori: Ikke kategorisert
Modell: RK-UT1

Trenger du hjelp?

Hvis du trenger hjelp med Kramer RK-UT1 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Kramer Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer