Kramer VM-2H2 Bruksanvisning

Kramer Mottaker VM-2H2

Les nedenfor 📖 manual på norsk for Kramer VM-2H2 (16 sider) i kategorien Mottaker. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/16
P/N: 2900-300602 Rev 4 www.kramerAV.com
USER MANUAL
MODEL:
VM-2H2
1:2 4K HDR HDMI DA
Kramer Electronics Ltd.
VM-2H2 Contents
i
Contents
Introduction 1
Getting Started 1
Overview 3
Typical Applications 3
Dening the VM-2H2 1:2 4K HDR HDMI DA 4
Setting the DIP-Switches 4
LED Indications 5
Mounting VM-2H2 6
Connecting the VM-2H2 7
EDID Acquisition Policy 8
Upgrading the Firmware 9
Default EDID 10
Technical Specications 12
Kramer Electronics Ltd.
VM-2H2 Introduction
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world
of unique, creative, and aordable solutions to the vast range of problems that confront video,
audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have
redesigned and upgraded most of our line, making the best even better!
Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging materials for possible
future shipmen t.
Review the contents of this user manual.
Go to www.kramerav.com/downloads/VM-2H2 to check for up- -date user manuals, to
application programs, and to check if rmware upgrades are available (where appropriate).
Achieving Best Performance
Use only good quality connection cables (we recommend Kramer high-performance,
high-resolution cables) to avoid interference, deterioration in signal quality due to poor
matching, and elevated noise levels (often associated with low quality cables).
Do not secure the cables in tight bundles or roll the slack into tight coils.
Avoid interference from neighboring electrical appliances that may adversely inuence signal
quality.
Position your Kramer away from moisture, excessive sunlight and dust.
VM-2H2
Safety Instructions
Caution:
This equipment is to be used only inside a building. It may only be connected to other
equipment that is installed inside a building.
For products with relay terminals and GPI\O ports, please refer to the permitted rating
for an external connection, located next to the terminal or in the User Manual.
There are no operator serviceable parts inside the unit.
Warning:
Use only the power cord that is supplied with the unit.
Disconnect the power and unplug the unit from the wall before installing.
Do not open the unit. High voltages can cause electrical shock! Servicing by qualied
personnel only.
To ensure continuous risk protection, replace fuses only according to the rating
specied on the product label which located on the bottom of the unit.

Produkspesifikasjoner

Merke: Kramer
Kategori: Mottaker
Modell: VM-2H2

Trenger du hjelp?

Hvis du trenger hjelp med Kramer VM-2H2 still et spørsmål nedenfor, og andre brukere vil svare deg




Mottaker Kramer Manualer

Mottaker Manualer

Nyeste Mottaker Manualer

QSC

QSC PL236 Bruksanvisning

20 Desember 2024
QSC

QSC PL218 Bruksanvisning

20 Desember 2024
QSC

QSC PL224 Bruksanvisning

20 Desember 2024
QSC

QSC PL230 Bruksanvisning

20 Desember 2024
QSC

QSC MX1000a Bruksanvisning

20 Desember 2024
QSC

QSC MX2000a Bruksanvisning

20 Desember 2024
QSC

QSC MX3000a Bruksanvisning

20 Desember 2024
QSC

QSC MX1500a Bruksanvisning

20 Desember 2024
QSC

QSC PLX1202 Bruksanvisning

20 Desember 2024