Lynx LCB2-3 Bruksanvisning

Lynx Stekeovn LCB2-3

Les nedenfor 📖 manual på norsk for Lynx LCB2-3 (3 sider) i kategorien Stekeovn. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/3

LCB2-3 INSTALLATION INSTRUCTIONS

TOOLS REQUIRED: 7/16 Wrench

CONTENTS OF KIT: An adjustable side burner mounting bracket

Side shelf mounting bracket with 7/16 fasteners

Decorative cover for the L27 and L36 models

The side burner support bracket comes preassembled for the L27 and L36

Lynx Grills, 7300 Flores St., Downey, CA 90242

Customer Care Ph.: 888 5969/ Fax: 562 6978/Service@lynxgrills.com -289- -299-

P/N 34912 8/14

INSTRUCTIONS FOR MODELS L36 and L27:

1. Remove the right hand side shelf and the cabinet back panel (fig. 1)

2. Mount the LCB2 -3 side burner to the supports (fig. 2)

3. If needed, any misalignment can be corrected by 1st measuring the amount of misalignment, 2nd loosening the

bracket support fasteners. 3rd raise or lower the bracket according to your measurements.

Tighten the fasteners. (fig 3)

4. Hang the side shelf removed in step 1 on the right side shelf support pins of the side burner (Fig. 6, pg. 2)

P/N 34912. 8/14

Rear View

1 2

INSTRUCTIONS FOR MODELS L54, L42, L30:

1. Remove the right hand side shelf. See fig.1 on page 1

2. At the rear, remove the decorative cover (1) on the left hand side of the LCB2 3 by removing the Philips head screw -

and sliding it out. This also gives access to the gas piping connections. (Fig. 2)

3. Locate the mounting bracket on the inner most bracket support (Fig 3). Remove the 7/16 fasteners holding it in

place Reinstall the mounting bracket on the rear most bracket support and secure it with the 7/16 fasteners

4. As in step 3 on page 1,correct any misalignment in the shelf

5. Move the shelf mounting bracket on the right hand side, to the outermost mounting holes using the 7/16 nuts, and

tighten. (Fig. 5)

6. Hang the side shelf removed in step 1, pg. 1 to the right side of side burner on the shelf mounting bracket pins

(Fig 6)

Remove the bracket from the inside

support and install it onto the outer

support

This bracket must be mounted in the outer

position

Once the side burner is mounted to the grill the gas con-

nections can be made. Refer to the illustrations on the

right for proper gas installation examples.

After the side burner gas connections are made it is rec-

ommended that a leak test be done on all gas line fittings.

Apply a soap and water solution to all connections and

look for bubbles to form which indicate a gas leak. If no

bubbles are present, make the electrical connections

The side burner is electrically connected to grill at the

transformer. Disconnect the transformer from the grill

and plug in the side burner as shown in the illustration

below.

Finished Dimensions

Produkspesifikasjoner

Merke:	Lynx
Kategori:	Stekeovn
Modell:	LCB2-3

Trenger du hjelp?

Hvis du trenger hjelp med Lynx LCB2-3 still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Stekeovn Lynx Manualer

Lynx LCB2-3 Bruksanvisning

30 Mars 2025

Stekeovn Manualer

Nyeste Stekeovn Manualer

Thomson BOT61MXD Bruksanvisning

1 April 2025

AEG CP7400B Bruksanvisning

1 April 2025

AEG NKM7N721T Bruksanvisning

1 April 2025

AEG NKM7N721B Bruksanvisning

1 April 2025

Teka EM/30 2P Bruksanvisning

1 April 2025

Franke FCH 604 3G TC Bruksanvisning

1 April 2025

Fagor 8H-171 AX Bruksanvisning

1 April 2025

Dometic SKS101 Bruksanvisning

1 April 2025

Rosieres RSTP634MC/G3 Bruksanvisning

1 April 2025

Fagor 8H-783TCN Bruksanvisning

1 April 2025