Manitowoc JC-0495 Bruksanvisning
Les nedenfor 📖 manual på norsk for Manitowoc JC-0495 (2 sider) i kategorien Ismaskin. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/2
Model
JC-0495 JC-0895 JC-1395
2110 South 26th Stre et
PO Box 1720
Manitowoc, WI 54221-1720 USA
Tel: 1.920.682.0161
Fax: 1.920.683.7589
www.manitowocice.com
Vertical Discharge Remote Condenser
For S-Series Ice Cube Machines
Vertical Discharge Remote Condenser
For S-Series Ice Cube Machines
JC-0895
Remote Condenser
Standard Features
• Vertical discharge remote condenser is available
for S-Series 500, 600, 850, 1000, 1400 and 1800
ice machines. Refer to ice machine specification
sheet for equipment dimensions, production
capacities, electrical requirements, and ice storage
bin compatibility.
• Condenser operation range from -20°F (-29°C) to
120°F (49°C). Can be installed with up to 20" (50.8
cm) of bottom clearance.
• Remote system consists of a remote condenser
and interconnecting refrigerant lines. All
components are pre-charged with environmentally
responsible refrigerant and have quick-connect
fittings for convenient installation. Order ice cube
machine, ice storage bin and line set separately.
Warranty
• 3-year parts and labor. See warranty statement for
complete details.
Remote, air-cooled condenser system
improves efficiency and ice production,
conserving energy.
Manitowoc remote condenser systems
effectively dissipate heat at a convenient
location, indoors or outdoors, away from
the ice machine. This maximizes ice-making
capability and minimizes air conditioning
loads by lowering the ambient air
temperature at the ice machine.
Single S-Series
Ice Machine
Remote
Condenser
S-500 JC-0495
S-600, 850 or 1000 JC-0895
S-1400 or 1800 JC-1395
Installation Information and Dimensions
Maximum Location Distance—combined vertical and horizontal
distances from ice machine to condenser must comply with guidelines.
Maximum Line Length: 100' (30 m)*
Maximum Vertical Rise: 35' (10.5 m) above ice machine.
Maximum Vertical Drop: 15' (4.5 m) below ice machine.
To calculate other acceptable horizontal and vertical combinations,
refer to remote condenser installation instructions.
* Remote condenser has refrigerant charge for up to 50' (15 m) line length.
Over 50' (15 m) requires additional refrigerant charge at time of installation.
3219D ©2010 Manitowoc 1/10 Continuing product improvement may necessitate change of specifications without notice.
Vertical Discharge Remote Condenser
For S-Series Ice Cube Machines
2110 South 26th Street
PO Box 1720
Manitowoc, WI 54221-1720 USA
Tel: 1.920.682.0161
Fax: 1.920.683.7589
www.manitowocice.com
Typical Installation
Optional
34.00"
(86.36 cm)
or
38.00"
(76.20 cm)
24.50" (62.23 cm)
28.00" (71.12 cm)
29.16" (74.06 cm)
Electrical
Entrance
Discharge
Refrig.
Line
Liquid
Refrig.
Line
A
B
C
E
F
D
6.00" (15.24 cm)
3.50" (8.89 cm)
3.88" (9.85 cm)
12.13" (30.81 cm)
1.50" (3.81 cm)
6.50" 16.51 cm)
Optional
20.00" (50.80 cm)
16.00" (40.64 cm)
G
G
E
F
C
D
A
B
JC-0495, JC-0895, Remote Condenser
Optional
38.00" (96.52 cm)
34.00" (86.36 cm)
29.50" (74.93 cm)
27.94" (70.96 cm)
Electrical
Entrance
Discharge
Refrig.
Line
Liquid
Refrig.
Line
29.16" 74.06 cm)
A
B
C
D
6.00" (15.24 cm)
3.50" (8.89 cm)
4.00" (10.16 cm)
14.62" (37.13 cm)
E
F
Optional
20.00" (50.80 cm)
16.00" (40.64 cm)
G
E
F
C
D
A
B
1.50" (3.81 cm)
6.50" (16.51 cm)
G
JC-1395 Remote Condenser
Electric
Electrical power to the remote condenser is intended to be
supplied from the ice machine; however, if necessary, a separate
electrical power source can be used.
Remote S-Series Ice Machine
S-Series Remote Condenser
Standard Interconnecting Refrigerant Lines
S-Model Electrical
Service*
Minimum Circuit
Ampacity
Maximum
Fuse size
500 115/60/1 20 25
600 208-230/60/1 8.9 15
850 208-230/60/1 11.9 9.2 20 15
1000 208-230/60/1 15.7 10.6 25 15
1400 208-230/60/1 17.9 12.8 30 20
1800 208-230/60/1 23.1 13.0 40 20
* 230/50/1 available. Shaded box indicates 3 phase. Consult factory.
HACR circuit breakers can be used in place of fuses.
Condenser
S-Model
Matching
Ice Machine
Condenser
Electrical
Service* Amperage Weight
lbs. kgs.
JC-0495 500 115/60/1 2.3 76 34
JC-0895 600, 850, 1000 208-230/60/1 1.3 76 34
JC-1395 1400, 1800 208-230/60/1 1.3 96 44
* 230/50/1 available. Consult factory. HACR circuit breakers can be used in
place of fuses.
Model
Line Length Weight
ft. cm. lbs. kgs.
R(*)-20-R-404A 20 600 11 5 15
R(*)-35-R-404A 35 1,050 17 8 20
R(*)-50-R-404A 50 1,500 24 11 20
* RT prefix for Series 500, 600, 850, and 1000.
RL prefix for Series 1400 and 1800. Order separately.
Produkspesifikasjoner
| Merke: | Manitowoc |
| Kategori: | Ismaskin |
| Modell: | JC-0495 |
Trenger du hjelp?
Hvis du trenger hjelp med Manitowoc JC-0495 still et spørsmål nedenfor, og andre brukere vil svare deg
Ismaskin Manitowoc Manualer
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Ismaskin Manualer
- Ismaskin Edgestar
- Ismaskin Kogan
- Ismaskin Summit
- Ismaskin Koenic
- Ismaskin Blaupunkt
- Ismaskin Aconatic
- Ismaskin Yamazen
Nyeste Ismaskin Manualer
23 Oktober 2024
21 Oktober 2024
20 Oktober 2024
20 Oktober 2024
20 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024