Martin Logan Monolith Bruksanvisning

Les nedenfor 📖 manual på norsk for Martin Logan Monolith (3 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/3
MO N O L I T H I & II
W a r n i n g !
The Monoliths are not designed to be bi-wired.
The internal crossover network of the Monolith is a 6dB per
octave, phase coherent network and as such, it can not be
bi-wired properly!
If you attempt to bi-wire the speaker with the “HI” and
“LOW” inputs you will be by-passing the internal crossover.
This could do serious damage to the electrostatic panel
interface device, as it is not designed for such operation.
The Monolith loudspeakers have been designed for two meth-
ods of operation:
1 Full range with two channels of amplification and a
single pair of cables.
2 Bi-amplification with an external electronic crossover,
four channels of amplification and two pairs of speaker
cables.
2101 Delaware Street, Lawrence, Kansas 66046, USA tel 785.749.0133 fax 785.749.5320 www.martinlogan.com
c l s e l e c t r o s t a t i c
MA R T I N LO G A N
©2000 MartinLogan, All rights reserved Rev. #110702

Produkspesifikasjoner

Merke: Martin Logan
Kategori: Ikke kategorisert
Modell: Monolith

Trenger du hjelp?

Hvis du trenger hjelp med Martin Logan Monolith still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Martin Logan Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer