Maruyama B420H Bruksanvisning

Les nedenfor 📖 manual på norsk for Maruyama B420H (16 sider) i kategorien Grastrimmer. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/16
OWNER'S/OPERATOR'S MANUAL
MANUAL DEL PROPIETARIO U OPERADOR
T h e P O W E R i n O u t d o o r P o w e r
Completely read and understand this manual PRIOR to using this product.
Lea y entienda este manual a fondo, ANTES de usar este producto.
BRUSHCUTTER
CORTADORA
B420H
— US-1 —
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
Read and understand this Instruction Manual before using the brushcutter. Be thoroughly familiar with the proper
use of the brushcutter.
Never allow children to operate the brushcutter. it is not a toy. Never allow adults to operate the unit without rst
reading the Instruction Manual.
Become familiar with the controls and know how to stop the engine quickly.
ALWAYS WEAR SAFETY GLASSES or other suitable eye protection, and hearing protection.
Keep the area of operation clear of all persons, particularly small children and pets.
Never operate a brushcutter when you are fatigued.
Never operate without proper guards or other protective safety devices in place.
Dress properly; do not wear loose clothing or jewelry. They can be caught in moving parts. Always wear substantial
footwear, long pants and long sleeved shirt.
Gasoline is highly ammable; handle it carefully. Fill the fuel tank with the correct mixture of gasoline and oil before
trying to start the engine.
Use an approved fuel container to store the gasoline/oil mixture.
Do not ll the tank when the engine is hot or running.
Do not smoke while handling gasoline.
Fill the fuel tank outdoors and up to about 10mm from the top of the tank, not the top of the ller neck.
Wipe any spilled gasoline before starting the engine.
Always be sure of your footing; keep a rm hold of the handles with both hands, and walk, never run.
Use the right tool for the job. Do not use the brushcutter for any job that is not recommended by the manufacturer.
Keep all fasteners tight to be sure the brushcutter is in safe working condition. Follow the maintenance instructions
provided on page US-6 of this manual.
Do not put hands or feet near or under the rotating parts.
Keep clear at all times.
If the brushcutter should start to vibrate abnormally, stop the engine and check immediately for the cause. Vibration
is generally a warning of trouble.
Do not trim too close to the ground in order to avoid hitting small stones or other debris. Avoid using the brushcutter
near rocks, gravel, stones and similar matter.
Use the brushcutter only in daylight or good articial light.
Shut off the engine and be certain the cutting blade has completely stopped rotating before inverting the machine.
SAFETY INSTRUCTIONS
SPECIFICATIONS
MODEL B420H
Dry Weight (kg) 8.2
Handle conguration Horn Handle
Engine Displacement (cm3) 41.5
Fuel Tank Capacity (L) 1.0
Carburetor Diaphragm Type
Lgnition Solid State System
Spark Plug NGK BPM6Y Set Gap 0,6 - 0,7 mm
Fuel Mixture Use Only Non - Leaded Regular Gasoline.
Two - Stroke Oil Mix 25:1 Ratio Must Be Approved For Air - Cooled Engines.
— US-2 —
PRODUCT DESCRIPTION
1. Gearcase
2. Shaft Assembly
3. Safety Decal
4. Model Name
5. Attachment Ring for Shoulder Harness
6. Throttle Trigger and Stop Switch
7. Handlebar
8. Clutch Drum Housing
9. Engine
10. Air Filter
11. Fuel Tank
12. Throttle Cable and Stop Switch Wires
13. Debris Shield
14. Shoulder Harness
1
2
3
4
5
6
7
8
9
10
11
12
13
14

Produkspesifikasjoner

Merke: Maruyama
Kategori: Grastrimmer
Modell: B420H

Trenger du hjelp?

Hvis du trenger hjelp med Maruyama B420H still et spørsmål nedenfor, og andre brukere vil svare deg