Mobotix MX-D16A-F-6D6N036 Bruksanvisning

Mobotix Overvåkingskamera MX-D16A-F-6D6N036

Les nedenfor 📖 manual på norsk for Mobotix MX-D16A-F-6D6N036 (2 sider) i kategorien Overvåkingskamera. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/2

Mx-D16

32.803-005_EN_10/2017

Quick Install

D16 DualDome

Variants

D16

• Mx6 system platform, H.264 support

• Recording on internal MicroSD card (SDXC, SDHC installed)

• Audio integrated (microphone and speaker)

• Sensor for temperature and shock detector(*) integrated

• PIR detector integrated

• Can be extended exibly using sets for outdoor applications

• Easy installation at building corners and poles using the

Corner and Pole Mount (accessory)

• Use the Vandalism Set for surveillance at extremely critical locations

• Weatherproof and robust camera housing (IP54, IK10)

Standard Delivery D16

1.9

1.6

1.5

1.3

1.4

1.10

1.11

1.12

1.13

1.1

1.2b

1.2a

1.2c

1.8

1.15

1.14

1.7

Item Count Part Name

1.1 1

Camera housing

1.2a 1

Lens units with lenses (freely adjustable,

to be ordered

separately

)

1.2b 1

Pano lens bridge (for 180° Panorama,

to be ordered

separately

, pre-installed)

1.2c 1

Fix lens bridge (for one day and one night lens,

to be

ordered separately

, pre-installed)

1.3 1

Standard dome for D16 Body

1.4 1

Enlarged XL dome for D16 complete cameras (Pano and

Fix) and part of the delivery of the Pano/Fix lens bridges

1.5 1

Cable cover

1.6 1

Ethernet cable

1.7 1

Hinged ferrite

1.8 1

MicroSD card (SDXC, SDHC pre-installed)

1.9 1

Custom tool with magnet

1.10 1

Outer shell

1.11 3

Stainless steel washers 5.3 mm dia.

1.12 3

Dowels 8 mm

1.13 3

Stainless steel wood screws 4.5x60 mm with Torx head

TX20

1.14 1

Torx wrench TX20

1.15 1

Allen wrench 3 mm

Connections and Initial Operation of the D16

You can nd detailed information on the installation connections and of the D16 in the

D15 Camera Manual

(PDF, available on www.mobotix.com >

Support > Manuals).

Please note that the boot options of this camera have changed compared to its predecessor (see

«Boot Options of the D16» on page 2

). Regarding

the rest of the initial operation of the D16, please see the

D15 Camera Manual

Chapter 3, «Initial Operation»

Slot for MicroSD card

Network

connector (*)

USB

L key

(magnetic,

inside housing)

Connectors

Dome thread

Camera

housing

Lenses

Outer shell

LEDs/PIR

Dome

* To suppress electromagnetic interferences, attach the enclosed hinged ferrite (item 1.7) directly behind the RJ45 connector of the camera's network

patch cable, see illustration.

Preparing the D16 for Installation

To facilitate the installation of the camera, you should complete the following tasks before actually installing the camera.

Preparatory Steps

Make sure that the condensed water outlets are pointing downwards when

planning the installation 1.

Remove the outer shell by pressing the magnetic custom tool into the three

holes of the outer shell one by one 2. Gently li the shell near each hole

to loosen the shell from its seats.

Next, unscrew the dome 3.

Insert the Individual Lens Units (1.2a)

Remove the center lock screw and the washer 1.

Insert the lens units into the seatings 2.

Insert the center lock screw and the washer and lightly tighten the screw

to keep the lens units

1.2a

in place 3. Do not overtighten the lock screw

so you can adjust the lens units later on.

Insert the Lens Bridge (1.2b/c)

Remove the center lock screw and the washer 1.

Disassemble the lens bridge by removing the two Allen screws with washers

2 (Pano lens bridge

1.2b

shown, similar for Fix lens bridge

1.2c

Insert the two brackets for the lens bridge into the seatings of the camera

housing 3.

Insert the center lock screw and the washer and lightly tighten the screw

to keep the brackets in place 4.

Insert the lens bridge between the brackets

, insert the two Allen screws

with the washers and lightly tighten the screws 6. Do not overtighten

the two screws so you can adjust the lens bridge later on.

Connect the Sensor Cables

Remove the protective covers of the image sensor connectors 1.

Connect the camera's sensor cables according to the color codes

. While

doing so, avoid twisting the sensor cables as much as possible.

Press the cable into the groove of the board 3. Take care that the wires

are not bent sharply at the plug, but that they are running in an arc.

Press the protective covers onto the connectors until they click into place

Insert the Lenses (Lens Bridges Only)

Remove the protective covers of the lens mounts and screw in the lenses.

Lens focus will be adjusted aer installing the camera and bringing it into

service (see

«Initial Operation of the D16»

1.2a

1.2b

1.2b 1.2c

Lens units

(individually adjust-

able)

2 image sensors on

Pano lens bridge 2 image sensors on

Fix lens bridge

With Outdoor Wall Mount With Corner and Pole Mount

and Outdoor Wall Mount

With Vandalism Set

Mounting Options of the D16

Installation on Walls or Ceilings Without Accessories

Aer drilling the holes for xtures (see

«Drilling Template for Installation

Without Accessories»

), attach the housing of the D16 at the designated

position using dowels and screws, then connect the cabling. Once the

power supply has been established, you will adjust the lens units or bridges

(whichever applies) and the lenses' focus (see

«Initial Operation of the D16»

Finally, you will install the dome and the outer shell.

Installation With Outdoor Wall Mount (Accessory)

Remove the cover plate of the Outdoor Wall Mount. Aer drilling the holes

for xtures (see

«Drilling Template for Installation Without Accessories»

attach the Outdoor Wall Mount at the designated position using dowels

and screws, then lead the cabling into the mount. Next, connect the cabling

and install the camera on the cover plate of the Outdoor Wall Mount using

the supplied screws. Then attach the cover plate with the camera to the

Outdoor Wall Mount.

For more information, please see the

D15 Camera Manual

Section 2.4,

«Mounting the Camera with Outdoor Wall Mount»

Installation With Corner and Pole Mount and Outdoor Wall Mount

(Accessory)

Lead the cabling from the rear through the Corner and Pole Mount and

attach it at the corner of a building or a pole (using steel straps). Then

attach the Outdoor Wall Mount to the Corner and Pole Mount.

The remaining installation of the D16 follows the steps under

«Installation

With Outdoor Wall Mount (Accessory)»

above.

Installation of the Vandalism Set (Accessory)

Remove the outer shell and the dome (see

«Preparing the D16 for Instal-

lation»

). Screw in the reinforced dome and hold the stainless steel ring

of the Vandalism Set in position to mark the holes for drilling (the bulge

in the steel ring covers the LED/PIR dome – see red circle in gure on the

right). Drill the holes for the mounting screws (or the dowels, whichever

applies), then apply the stainless steel ring and fasten it using the supplied

security screws.

75 mm/2.95 in

75mm/2.95in

Dia. 205mm/8.07in

Universal 6MP Dome Camera With

Two Lenses for Ceiling, Wall and Pole

Mounting

MOBOTIX 6MP camera for exible use in indoor and

outdoor applications, available as complete D16

DualDome (Day or Night) with lenses 6D/N/L036 to 237 and

with dierent lens bridge options.

More information:

www.mobotix.com > Products > Outdoor Cameras > D16

Inserting/Exchanging the SD Card

All camera models can use the integrated MicroSD card (SDHC) to record video data. In order to exchange the MicroSD card, please proceed as outlined

in the following instruction. For information on reliable SD cards, please see the MOBOTIX website www.mobotix.com > Support > MxMedia Library >

Planning in the document

MicroSD Card Whitelist for MOBOTIX Cameras

When replacing the SD card, make sure that recording has been deactivated in the browser (Admin Menu > Storage > Storage on External File Server /

Flash Device; activate recording again in the same dialog aer exchanging the card).

1. Remove the SD Card

Remove the outer shell and the cable cover of

the camera. If a MicroSD card has been installed,

gently press with your nger as indicated by

the arrow until you hear a

click

. Then release

the SD card. The card is protruding slightly and

can be easily removed.

2. Insert the SD Card

Insert the MicroSD card and gently press with

your nger as indicated by the arrow until you

hear another

click

. Make sure that the SD card

is fully inserted. Re-attach the cable cover and

the outer shell of the camera.

Click!

*: with rmware version 5.0.1 and higher

MOBOTIX AG

Kaiserstrasse

D-67722 Langmeil

Tel.: +49 6302 9816-103

Fax: +49 6302 9816-190

sales@mobotix.com

www.mobotix.com

Declaration of Conformity: www.mobotix.com > Support > MxMedia Library > Certicates

MOBOTIX, the MX logo, MxControlCenter, MxEasy, MxPEG and MxActivitySensor are trademarks of

MOBOTIX AG registered in the European Union, the U.S.A., and other countries • Information subject to

change without notice • MOBOTIX does not assume any liability for technical or editorial errors or omissions

Initial Operation of the D16

The initial operation starts with connecting the power supply (see section

«Network and Power Connection, Additional Cables»

in the

D15 Camera Manual

The rst access follows the procedure described in the same manual in the

«Initial Operation of the Camera»

section. All other tasks require access to

the camera's user interface in the browser. Enter the camera’s IP address into the address bar of the browser.

1. Enter Type of Lens Bridge and Lenses

Open the Admin Menu > Hardware

Conguration>ImageSensorCon-

guration dialog and select the type

of lens bridge you installed. Next, select

the lenses you installed for the image sensors in

HardwareConguration>LensConguration.

This step is required so the camera can apply the

proper distortion correction methods for the

installed lenses.

2. Adjust the Lens Focus

Remove the dome before proceeding.

Check the live image from the camera in the browser. Activate the focusing

aid in the browser (Focusing Aid Activated quick control, value).

Carefully turn the lens by hand in clockwise or counter-clockwise direc-

tion until the red area of the focusing aid is as small as possible.

Except

D16-Panorama/180°:

Switch to the other image sensor (Camera Selection

quick control) and repeat the process, if required.

Once the focus is adjusted properly, deactivate

the focusing aid again (Focusing Aid quick

control, value).Disabled

Note: Due to the lens eect of the dome, the

focus of the

B237 tele lens

is shiing slightly

once the dome has been mounted. Before

mounting the dome, the tele lens should be

turned about

90° in counter-clockwise direction

(as seen from the lens'

front). Make sure that you check the focus of the live image in your browser

with the dome installed and re-adjust the lens, if required.

3. Reboot the Camera and Reset the Image Settings

Reboot the camera (Admin Menu > General Tasks > Reboot) and then

reset the image settings and all views to the factory defaults (Manage

Settings > Load Image Factory Defaults quick control). If required, adjust

the image settings.

Only Pano/Fix:

Adjust the dual image using the on-screen con-

trol (g. on the right; see also

D15 Camera Manual

«Adjusting

the Panorama Image (D16-Pano Only)»

4. Savetheconguration

In the browser, select the quick control and set Manage Settings Store

EntireConguration as value. The camera stores the conguration in

the permanent camera memory so that the settings will be applied at the

next camera reboot.

Technical Specications D16

Lens Options MX-B036 to MX-B237 (20 to 135 mm in 35 mm format),

103° to 15° horizontal angle of view

Min. Illumination

Color sensor (6MP): 0.1 Lux at 1/60 s, 0.005 Lux at 1 s

Black&White sensor (6MP): 0.02 Lux at 1/60 s,

0.001 Lux at 1/1 s

Image Sensor 1/1.8“ CMOS, 6MP, progressive scan

Max. Image Size Color: 3072x2048 (6MP), 6144x2048 (12MP)

Black&White: 3072x2048 (6MP), 6144x2048 (12MP)

Image Formats

3072x2048 (6MP), 2592x1944 (5MP), 2048x1536 (QXGA), 1920x1080

(Full-HD), 1280x960 (MEGA), 1280x720 (HD), 1024x768, 800x600,

768x576 (D1-PAL), 704x576 (TV-PAL), 640x480, 384x288, 320x240,

160x120, custom formats

Max. Frame Rate

• MxPEG (max): 42@HD (1280x720), 34@Full-HD, 24@QXGA,

15@5MP, 12@6MP, 6@2x6MP

• M-JPEG (max): 26@HD (1280x720), 13@Full-HD, 9@QXGA,

5@5MP, 4@6MP, 2@2x6MP

• H.264 (max): 25@Full-HD, 20@QXGA

Video Codec MxPEG, M-JPEG, JPEG, H.264

Internal DVR MicroSD card (SDXC, SDHC pre-installed)

External

VideoRingBuer

Directly on NAS or PC/Server, no additional recording soware

required

Soware(Included) MxManagementCenter video management soware

Image Processing

Backlight compensation, automatic white balance, image distor-

tion correction, panorama correction, video motion detection,

MxActivitySensor

Virtual PTZ Digital pan/tilt/zoom, continuous up to 8X

Alarm/Events

Video Motion detection, MxActivitySensor, external signals, tem-

perature sensor, PIR, microphone, shock detector (with rmware

version 5.0.1 and higher), notication via e-mail, FTP, IP telephony

(VoIP, SIP), visual/sound alarms, pre- and post-alarm images

Microphone and

Speaker Integrated microphone and speaker

Audio Functions Lip-synchronous audio, two-way communication, audio recording

Interfaces Ethernet 100Base-T, MiniUSB;

inputs/outputs and RS232 via accessories

Video Telephony VoIP/SIP, two-way communication, remote controlling using key

codes, event notication

Security User/group management, HTTPS/SSL, IP address lter, IEEE 802.1x,

intrusion detection, digital image signature

Certications

EN55032:2012, EN55022:2010; EN55024:2010, EN61000-6-1:2007,

EN61000-6-3:2007+A1:2011, EN61000-6-4:2007+A1:2011, AS/ NZS

CISPR22:2009+A1:2010

Power Supply Year-round Power-over-Ethernet (IEEE 802.3af);

PoE class variable

Power Consumption Typ. 5 W

Protection Classes

IP54 and IK10

IP65 and IK10 with Outdoor Wall Mount

IP66 and IK10+ with Vandalism Set

Operating Conditions –30 to 60 °C/–22 to 140 °F

Dimensions/Weight

Diameter x Height: 205 x 108 mm (D16), 205 x 125 mm

(D16-Panorama/180°, D16-DNight); weight: approx. 750 g/1.65 lb

(including lenses)

Standard Delivery

Housing (high-resistance composite, PBT-PC), white, two shock-re-

sistant domes (transparent), mounting supplies, wrenches,

50 cm/19.69 in patch cable, soware, MicroSD card (installed)

Drilling Template for Installation Without Accessories

75 mm/2.95 in

75mm/2.95in

Dia.205mm/8.07in

Manuals and drilling templates: www.mobotix.com > Support > Manuals > IP Camera Systems > DualDome D16

Camera

without

accessories

Vandalism Set

Outdoor Wall Mount

Important Notes

Safety Warnings

Notes on Installing:

• This product must not be used in locations exposed to

the dangers of explosion.

• Make sure that you install this product as outlined in

Chapter 2, «Installation»

of the corresponding manual.

A faulty installation can damage the camera!

•

When installing this product, make sure that you are only

using genuine MOBOTIX parts and MOBOTIX connection

cables.

•

Only install this product on suitable, solid materials that

provide for a sturdy installation of the xing elements

used.

Electrical installation: Electrical systems and equipment may

only be installed, modied and maintained by a qualied

electrician or under the direction and supervision of a qualied

electrician in accordance with the applicable electrical guide-

lines. Make sure to properly set up all electrical connections.

Electrical surges: MOBOTIX cameras are protected against

the eects of small electrical surges by numerous measures.

These measures, however, cannot prevent the camera from

being damaged when stronger electrical surges occur. Special

care should be taken when installing the camera outside of

buildings to ensure proper protection against , since lightning

this also protects the building and the whole network infra-

structure.

Never touch the lenses: Due to the high performance of the

D16, the area of the image sensor can get quite hot, especially

when the ambient temperature is also high. This does not

aect the proper functioning of the camera in any way. For

this reason, the product must not be installed within the reach

of persons without the dome.

Powerobeforeopeningthecamera: Make sure the power

supply to the camera is disconnected before opening the cam-

era housing (e.g., when inserting or exchanging lenses, lens

units and SD cards).

Network security: MOBOTIX products include all of the nec-

essary conguration options for operation in Ethernet net-

works in compliance with data protection laws. The operator

is responsible for the data protection concept across the entire

system. The basic settings required to prevent misuse can be

congured in the soware and are password-protected. This

prevents unauthorized parties from accessing these settings.

Legal Notes

Legal aspects of video and sound recording: You must comply

with all data protection regulations for video and sound mon-

itoring when using MOBOTIX products. Depending on national

laws and the installation location of the D16, the recording of

video and sound data may be subject to special documentation

or it may be prohibited. All users of MOBOTIX products are

therefore required to familiarize themselves with all applicable

regulations and to comply with these laws. MOBOTIX AG is not

liable for any illegal use of its products.

Disposal

Electrical and electronic products contain many valuable

materials. For this reason, we recommend that you dispose

of MOBOTIX products at the end of their service life in accor-

dance with all legal requirements and regulations (or deposit

these products at a municipal collection center). MOBOTIX

products must not be disposed of in household waste! If the

product contains a battery, please dispose of the battery sep-

arately (the corresponding product manuals contain specic

directions if the product contains a battery).

Disclaimer

MOBOTIX AG does not assume any responsibility for damages,

which are the result of improper use or failure to comply to the

manuals or the applicable rules and regulations. Our General

Terms and Conditions apply. You can download the current

version of the General Terms and Conditions from our web-

site at www.mobotix.com by clicking on the COS link at the

bottom of every page.

Boot Options of the D16

By default, the camera starts as DHCP client and automatically tries to get

an IP address from a DHCP server. To start the camera in a mode dierent

from the default mode, you can activate the boot menu of the camera.

1. Preparing the Camera

• Disconnect the camera's power supply.

•

Make sure that you have the custom tool with magnet (item 1.8) at hand.

• Reconnect the power supply of the camera.

2. Activating the Boot Menu

The red LED lights up 5 to 10 seconds aer establish-

ing the power supply and will stay on for 10 seconds.

Briey press the magnet of the custom tool onto the spot

indicated by the red circle in the gure. The camera enters

the boot menu, ready for selecting one of the boot options.

The LED now ashes once and repeats the ash signal aer pausing for one

second (the number of ashes indicates the current boot option). To go to

the next boot option, briey press the magnet again onto the designated

spot (< 1 sec). Aer the last boot option, the camera returns to the rst

option (LED ashes once).

LED

ashes

Boot

Option Meaning Audio

Conrmation*

1 x Not used Not available on this camera model. —

2 x Factory

Defaults

Starts the camera with factory defaults

(factory default IP address, users and

passwords will not be reset).

Boing

3 x Automatic IP

Address

Starts the camera as DHCP client and

tries to obtain an IP address from a DHCP

server. If a DHCP server cannot be found or

no IP address can be obtained, the camera

starts with its factory default address.

Boing Boing

4 x Recovery

System

Starts the camera with the recovery sys-

tem, e.g., in order to recover from a failed

update of the camera soware.

Alarm Sound

*Only on cameras with audio option and installed speaker.

3. Selecting a Boot Option

Press the magnet longer (> 2 sec) onto the indicated position. The camera

conrms the selection by ashing rapidly three times. You can now remove

the magnet. Aer 20 sec, the camera will conrm the selection by playing

a sound according to the table above.

If nothing is selected, the camera will resume its normal boot process

aer a certain time.

Produkspesifikasjoner

Merke:	Mobotix
Kategori:	Overvåkingskamera
Modell:	MX-D16A-F-6D6N036

Trenger du hjelp?

Hvis du trenger hjelp med Mobotix MX-D16A-F-6D6N036 still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Overvåkingskamera Mobotix Manualer

Mobotix Q25 Bruksanvisning

26 Oktober 2024

Mobotix MX-D25M-SEC-D38 Bruksanvisning

16 Oktober 2024

Mobotix M25M Bruksanvisning

16 Oktober 2024

Mobotix D15Di-Sec-180 5MP Bruksanvisning

16 Oktober 2024

Mobotix MX-M16A-6D6N041 Bruksanvisning

16 Oktober 2024

Mobotix MX-M16A-6D6N061 Bruksanvisning

16 Oktober 2024

Mobotix MX-D16A-F-6D6N061 Bruksanvisning

16 Oktober 2024

Mobotix MX-D16A-F-6D6N041 Bruksanvisning

16 Oktober 2024

Mobotix MX-D16A-F-6D6N036 Bruksanvisning

16 Oktober 2024

Mobotix M26 Allround Bruksanvisning

16 Oktober 2024

Overvåkingskamera Manualer

Nyeste Overvåkingskamera Manualer

Lorex LNB45ABW Bruksanvisning

27 Oktober 2024

Lorex W261AQ Bruksanvisning

27 Oktober 2024

Lorex LNB45ABB Bruksanvisning

27 Oktober 2024

Lorex LNE45DDW Bruksanvisning

27 Oktober 2024

Setti+ SC853 Bruksanvisning

27 Oktober 2024

Defender STEALTH1 Bruksanvisning

27 Oktober 2024

Setti+ SC930 Bruksanvisning

27 Oktober 2024

AViPAS AV-1251 Bruksanvisning

24 Oktober 2024

AViPAS AV-2010 Bruksanvisning

24 Oktober 2024

Lumens VC-A71SN Bruksanvisning

24 Oktober 2024