Nedis ANOR5G10WT Bruksanvisning

Les nedenfor 📖 manual på norsk for Nedis ANOR5G10WT (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
3G /4G LTE / 5G Outdoor External Antenna
ANOR5G10WT
INTRODUCTION
Thank you for choosing our 5G high gain directional external antenna. This antenna is designed to enhance the performance and signal strength of
your 5G-enabled devices. Please read this manual carefully before installing and using the antenna to ensure optimal performance. Compact and stylish
housing, it can be accompany with your cpe and sim card router or Cell Phone Signal Boosters.
Technical Specications:
Covered Services: 3G / 4G / 4G LTE / 5G
Frequency: 698 - 960 MHz /1710 - 2700 MHz / 3300 - 3600 MHz / 4800 - 5000 MHz
Gain: 10 / 11 ± 1 dBi
High Directionality
Cable xed at antenna RG58U 1 ft N-type connector
4.0m LMR200 cable xed on the antenna with a SMA-male connector
Anti-UV housing
Pole installations method
PACKAGE CONTENT
Please check the content before your installation
1. Antenna x 1 pc
2. LMR 200 cable x 1 pc
3. Installation materials
4. Manual 1x
Installation
Step 1. Read this manual, ideally from start to nish, so that you understand the whole Installation process before you begin.
Step 2. Choose a suitable location for antenna installation with a clear line of sight to the 4G LTE or 5G cellular towers. Use the provided
mounting kit to secure the antenna. Ensure a stable and secure mount to prevent movement or damage. For optimal performance, it is
recommended to install the antenna outdoors.
Step 3. Locate a wooden pole or metallic pole where you would like to x the antenna.
Step 4. Fix the antenna to the pole by using the mounting material, then secure the antenna by tightening the U-Bolt with the buttery screws
Step 5. Connect the SMA-Male connector of the LMR200 coaxial cable on the antenna to the 4G or 5G device's antenna port. The
device could be a 4G LTE or 5G CPE (Customer Premises Equipment), SIM card router, or cell phone Singla Boosters. Ensure a secure
connection to minimize signal loss.
Step 6. Adjust the antenna direction for maximum signal strength. Use a compass or refer to your device's signal strength indicator to nd the
optimal direction. Gradually adjust the antenna angle and direction, checking the signal strength periodically. Ensure a secure and snug
connection to minimize signal loss.
Maintenance and Care:
Regularly inspect the antenna for any signs of damage, corrosion, or loose connections.
Troubleshooting:
If experiencing signal issues, recheck the antenna connection and directional alignment. Ensure there are no obstructions blocking the antenna's
line of sight to the cellular tower .
Compliance and Safety Guidelines:
Comply with local regulations and safety standards during installation.
Do not attempt to modify or disassemble the antenna.
Ensure that the installation location is safe and secure.
Thank you for choosing our 5G Outdoor Antenna. Enjoy enhanced 5G connectivity!
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch – The Netherlands
service@nedis.com

Produkspesifikasjoner

Merke: Nedis
Kategori: Ikke kategorisert
Modell: ANOR5G10WT

Trenger du hjelp?

Hvis du trenger hjelp med Nedis ANOR5G10WT still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Nedis Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer