Orion R4N43NNU Bruksanvisning

Orion Følge R4N43NNU

Les nedenfor 📖 manual på norsk for Orion R4N43NNU (35 sider) i kategorien Følge. Denne guiden var nyttig for 6 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/35
Installaon and User's Guide
<All contents of this document may change without prior notice, and actual product appearance may differ from that depicted herein>
USER
MANUAL
Video Wall Soluon
R4N UHD SERIES
R00 2
<TABLE OF CONTENTS>
1 SAFETY INSTRUCTION 3
2 FCC RF INTERFERENCE STATEMENT 7
3 INSTALLATION 8
4 OSD MENU SETTING 13
5 SPECIFICATION 21
6 R4N COMMANDER (Video Wall Control Protocol) 24
7 TROUBLESHOOTING 35
8 LIMITED WARRANTY 35
[ USER MANUAL ]
R00 3
Follow this safety instrucon to use the monitor properly and prevent the damage.
Keep this user’s guide book for later use.
1. SAFETY INSTRUCTION
* This safety instrucon has “Warning” & “Cauon” as below
Warning - If the user does not follow this instrucon,
it may cause the serious damage to the user.
Cauon - If the user does not follow this instrucon, it may cause the slight
damage to the user or cause some damages to the monitor.
Warning
Never remove the back cover and touch
the inside of the monitor.
If you need a service, please contact the
service center.
Keep away the monitor from the
direct sunlight and a heang appliance.
Never put objects of any kind into this
product as they may result in a risk of re
or electric shock.
Connect the power cord to the wall
outlet ghtly. If the power cord or plug are
defecve and the wall outlet is not
ght, please do not use them.
[ USER MANUAL ]
R00 4
Warning
When lightning and thundering, unplug
the monitor from the wall outlet and
never touch it.
Unplug this product from the wall outlet,
when it does not operate for a long me.
When smoking and noising from the
monitor, unplug the product from the wall
outlet and contact a service center.
WARNING : How to x
Do not open this product as it contains high voltage inside.
It may create an electric shock.
If the user disassembles and remove the back cover, it does not make sure
to make up for the damage and do a service and exchange the monitor.
For cleaning do not use liquid cleaners.
Never touch the power plug with wet-
hands.
[ USER MANUAL ]
R00 5
Cauons
Install this monitor some distance
from the wall and do not install unless
proper venlaon is provided.
Place this product on a stable place.
If not, it may fall, causing serious
damages to the monitor and people.
The openings must not be blocked by
curtain, rug or other similar surface.
Before carrying the monitor, turn it o and
unplug the signal cables and the power
cord from the wall outlet.
When carrying this monitor, be careful
not to damage the panel and drop it
It may cause some trouble.
Take the power plug out from the wall
outlet.
Do not pull the cable. It may snap the
inner-wires and cause overheang and re.
[ USER MANUAL ]
R00 6
Cauons
Install this monitor about 50cm far from
the eyes and an angle of 0~15 degrees
below eyes. Too close installaon may
cause having weak sight.
Do not press the LCD panel with hands or
the sharpened material hardly.
For cleaning, unplug the monitor from the
wall outlet. Do net use the liquid cloth.
Use the so cloth.
Do not use the chemical liquid for cleaning.
It may cause fading and breakage.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR WATER.
Instrucons for Disposal of Electrical and Electronic Equipment in Private Households
Disposal of used Electrical and Electronic Equipment
(Applicable in the European Union and other European countries with garbage separate
disposal and collecon methods)
This symbol on the product, or in the related documents in the package, indicates that this
product shall not be treated as normal household waste. Instead, it should be taken to a proper
applicable collecon point or depot for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent possible negave consequences for
the environment and human health, which could otherwise be caused by inappropriate waste handling of
this product. The recycling of materials will help to conserve natural resources.
For more detailed informaon about recycling of this product, please contact your local city authority,
your household waste disposal service or the place where you purchased the product.
[ USER MANUAL ]
R00 7
NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protecon against harmful interference in a residenal
installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is
no guarantee that interference will not occur in a parcular installaon.
If this equipment does cause harmful interference to radio or television recepon which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures.
- Reorient or relocate the receiving antenna.
- Increase the separaon between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio, TV technician for help.
- Only shielded interface cable should be used.
Finally, any changes or modicaons to the equipment by the user not expressly approved by the grantee or
manufacturer could void the users authority to operate such equipment.
DOC COMPLIANCE NOTICE
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out
in the radio interference regulaon of Canadian Department of communicaons.
2. FCC RF INTERFERENCE STATEMENT
[ USER MANUAL ]
R00 8
3.1 UNPACKING
Remove the package cover and place the product on a at and secure surface or in the installaon locaon.
This equipment should be unpacked and handled with care. If an item appears to have been damaged
in shipment, nofy the shipper immediately. Check whether all the following device and accessories are
included with the main system. If any items are missing, nofy your Sales or Customer Service Representave.
3.2 PARTS
3. INSTALLATION
*Depending on the product model type, there may be variaons in appearance.
LCD Monitor &
Keypad
UTP Cable DP Cable HDMI Cable
Joint Bracket(2EA) &
BHMS M4x8 BK(8EA)
User ManualRemote ControllerBaery
Power Cable
Serial Cable(M/F Straight cable)
[ USER MANUAL ]
R00 9
3.3 KEYPAD
1) KEYPAD CONTROLLER
OSD KEY FUNCTION
On/O the OSD menu or exit the source selecon menu
Move the cursor the choose on the OSD menu
Select the source on the INPUT menu
Move up the cursor to choose on the OSD menu
Acvate the auto adjustment of RGB source
Return to normal mode from power saving mode
Control down the OSD menu or move to the previous menu
Volume down
Select the OSD menu
Control up on the OSD menu
Volume up
Turn the power ON or OFF. There will be a few seconds delay before the display appears.
The power LED(next the power switch) lights with green when the power is turned ON.
The power is turned o by pressing the power switch again and power LED goes red.
This KEYPAD is aached to a magnet, so you can freely paste
If you want to replace with a longer cable Please purchase separately
UTP Cable (1.5m)
KEYPAD
*Depending on the product model type, there may be variaons appearance.in
[ USER MANUAL ]

Produkspesifikasjoner

Merke: Orion
Kategori: Følge
Modell: R4N43NNU

Trenger du hjelp?

Hvis du trenger hjelp med Orion R4N43NNU still et spørsmål nedenfor, og andre brukere vil svare deg




Følge Orion Manualer

Følge Manualer

Nyeste Følge Manualer