PCE Instruments PCE-FOT 10 Bruksanvisning
PCE Instruments
Termometer
PCE-FOT 10
Les nedenfor 📖 manual på norsk for PCE Instruments PCE-FOT 10 (9 sider) i kategorien Termometer. Denne guiden var nyttig for 7 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/9
© PCE Instruments
Food / Hygiene Thermometer PCE-FOT 10
User Manual
User manuals in various languages (français,
italiano, español, português, nederlands, türk, polski,
русский, 中文
中文
中文
中文中文) can be found by using our
product search on: www.pce-instruments.com
Last change: 26 July 2018
v1.0
English
© PCE Instruments
Contents
1 Safety notes ........................................................................................... 1
2 Technical specications 2 ......................................................................
3 Interpretation of the measured values ................................................ 2
4 Device description ................................................................................ 3
5 Measurement ......................................................................................... 4
6 Settings / conguration mode ............................................................. 4
7 Advanced alarm settings 5 .....................................................................
8 Calibration 5 .............................................................................................
9 . 6 Contact ................................................................................................
10 Disposal ................................................................................................. 6
© PCE Instruments
1
1 Safety notes
Please read this manual carefully and completely before you use the device for the rst time. The
device may only be used by qualied personnel and repaired by PCE Instruments personnel.
Damage or injuries caused by non-observance of the manual are excluded from our liability and
not covered by our warranty.
• The device must only be used as described in this instruction manual. If used otherwise,
this can cause dangerous situations for the user and damage to the meter.
• The instrument may only be used if the environmental conditions (temperature, relative
humidity, …) are within the ranges stated in the technical specications. Do not expose
the device to extreme temperatures, direct sunlight, extreme humidity or moisture. The
device is intended for indoor use.
• Before the measurement, the device should have stabilis ambient temperatureed at ,
which is important when moving from cold to warm rooms and vice versa.
• Do not expose the device to shocks or strong vibrations.
• The case should only be opened by qualied PCE Instruments personnel.
• Before making a measurement, make sure the device is entirely closed.
• Never use the instrument when your hands are wet.
• You must not make any technical changes to the device.
• The appliance should be cleaned with a damp cloth after each use. Use only pH-neutral
cleaner, no abrasives or solvents.
• The device must only be used with accessories from PCE Instruments or equivalent.
• When the frying oil tester is not used for a longer period of time, remove the batteries.
• Do not store the meter together with any chemicals.
• Before each use, inspect the case for visible damage. If any damage is visible, do not
use the device.
• Wear your personal protective equipment during each measurement to avoid injury.
This also applies to other people near the measuring location as oil splashes can cause
serious injury to human skin and eyes.
• To avoid burns, never touch the sensor or the metal shaft directly after the
measurement as these parts can become very hot when they are immersed into hot
oil.
• Remove the oil quality meter from the oil when you leave the place.
• Do not use the instrument in explosive atmospheres. Also avoid proximity to explosive,
easily ammable or chemical substances when the sensor is hot.
• Only use the device in systems that are electrically tested on a regular basis. Never
connect the conductive metal parts of the meter with a source of voltage. Inspect the
system visually before each measurement. If there are any signs of damage, do not
carry out any measurements until the problem has been resolved.
• The measurement range as stated in the specications must not be exceeded under
any circumstances.
• Non-observance of the safety notes can cause damage to the device and injuries to
the user.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of
business.
If you have any questions please contact PCE Instruments. The contact details can be found at
the end of this manual.
Produkspesifikasjoner
| Merke: | PCE Instruments |
| Kategori: | Termometer |
| Modell: | PCE-FOT 10 |
Trenger du hjelp?
Hvis du trenger hjelp med PCE Instruments PCE-FOT 10 still et spørsmål nedenfor, og andre brukere vil svare deg
Termometer PCE Instruments Manualer
29 Desember 2024
29 Desember 2024
29 Desember 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Termometer Manualer
- Termometer Philips
- Termometer IFM
- Termometer Arendo
- Termometer Medel
- Termometer La Crosse Technology
- Termometer SereneLife
- Termometer Sencor
- Termometer EMOS
- Termometer Optex
- Termometer Bearware
- Termometer Braun
- Termometer Tristar
- Termometer TFA
- Termometer Owon
- Termometer Neno
- Termometer Miniland
- Termometer Techno Line
- Termometer Innoliving
- Termometer TensCare
- Termometer Testo
- Termometer Comelec
- Termometer Vicks
- Termometer Ebro
- Termometer Senseca
- Termometer Etekcity
- Termometer Scala
- Termometer Proficare
- Termometer A&D Medical
- Termometer AGM
- Termometer Cresta
Nyeste Termometer Manualer
20 Mars 2025
6 Mars 2025
5 Mars 2025
5 Mars 2025
5 Mars 2025
5 Mars 2025
24 Februar 2025
24 Februar 2025
20 Februar 2025
19 Februar 2025