Pyle PWPSB1103 Bruksanvisning

Pyle Soundbar PWPSB1103

Les nedenfor 📖 manual på norsk for Pyle PWPSB1103 (8 sider) i kategorien Soundbar. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/8
www.PyleUSA.com
2
Installation
1. Stick the 45X10X0.5mm non-slip rubber strips (2 pieces) on the bottom of the clamps,
then insert them into the slider.
2. Align the screw holes at the bottom of the clamps with the positioning holes that have been
made in the slider and lock the M5X24mm screws and M5 spring washers to x the clamps.
3. Stick 48X30X2mm rubber non-slip pads on clamps.
www.PyleUSA.com
3
4. Installing on the cage bar of 1.5” to 2.0”. Wrap the rubber strip on the cage bar to prevent
being scratched. And then, press the aluminum rings on the rubber strip. The screw mounting
holes of the aluminum ring are aligned with the base.
• 2” Cage bar are installed using 2” aluminum ring and 120X14X1mm rubber strip.
• 1.875” Cage bar are installed using 2” aluminum ring and 130X14X2mm rubber strip.
• 1.75" Cage bar are installed using 1.75" aluminum ring and 120X14X1mm rubber strips.
• 1.5" Cage bar are installed using 1.75" aluminum ring and 120X14X4mm rubber strips.
5. Use M6X60mm screws and M6 spring washers to pass through the aluminum ring and the
base and the M6 non-slip nut at the back to x the aluminum ring on the base as shown in the
gure. Each nut should be installed in the hexagonal groove.

Produkspesifikasjoner

Merke: Pyle
Kategori: Soundbar
Modell: PWPSB1103

Trenger du hjelp?

Hvis du trenger hjelp med Pyle PWPSB1103 still et spørsmål nedenfor, og andre brukere vil svare deg