Really Right Stuff BPC-16 Bruksanvisning
Really Right Stuff
Stativ
BPC-16
Les nedenfor 📖 manual på norsk for Really Right Stuff BPC-16 (3 sider) i kategorien Stativ. Denne guiden var nyttig for 6 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/3
MAINTENANCE
General Care
Keep ball free of dust and grit. Do not attempt to disassemble the
BPC-16.
Clamp Maintenance
Our clamp delivers a lifetime of wear. However, from time to time,
we recommend placing a drop of lubricant on the shaft to prevent
binding. If you find that your clamp is not closing as smoothly as it
used to, unscrew the knob to fully open the clamp and turn it upside
down. Blow out any dirt or grit, and place a drop of lubricant on the
threads.
GUARANTEE
ALL REALLY RIGHT STUFF BRAND PRODUCTS ARE GUARANTEED
TO THE ORIGINAL PURCHASER TO BE FREE OF DEFECTS IN
MATERIALS OR WORKMANSHIP FOR FIVE (5) YEARS FROM THE
DATE OF PURCHASE. PRODUCTS WILL BE REPAIRED OR REPLACED
AT OUR OPTION.
® , ™, © 1990-2018 Really Right Stu, LLC. All rights reserved. Comes with stud, ” hex key, T8 Torx¼”-20
BPC-16
PANNING MICRO BALL
PATENT PENDING
1146 Farmhouse Lane, San Luis Obispo, CA 93401 USA
1-805-528-6321 | 1-888-777-5557
www.ReallyRightStu.com
SPECIFICATIONS:
Weight: ............................................................................4.4 ounces (125g)
Height: ........................................................2” overall, 1.85” added height
Load Capacity: 5 pounds (2.3kg) .................................................................
Tripod Mount: female ¼”-20 socket ............................................................
Ball Articulation: ±45°, 90° notch ................................................................
Panning Base: 5° increments, zero to 360° ................................................
Optional Mount Stud: 1/4”-20 x 1/2” ...........................................................
Ball Diameter: .................................................................................... 16mm
Stem Base Diameter: ........................................................................ 0.725”
Tension Adjustment: via ball clamp lever ..................................................
Locking Mechanism:..................................nested jaw & pan lock knobs
PATENT PENDING
less
tension
more
tension
TENSION ADJUSTMENT
The BPC-16 comes from the factory with a tension setting that is
suitable for most support setups. The ball lock lever can also be
adjusted to apply more press tension to the ball.
Remove Tension Adjustment Screw and Ball Lock Lever
2
USING THE DROP NOTCH
Loosen the Ball Lock Knob
Fully seat camera into the drop notch
Release Pan Lock Knob, rotate the
camera to your desired angle and
retighten Pan Lock Knob
2
TOP VIEW:
BOTTOM VIEW:
Position Ball Lock Lever to the middle and insert
Torx key tool into Tension Adjustment Screw
1
Re-install Ball Lock Lever
For less tension, mount Ball Lock Lever
to the left of middle.
R e - i n s t a l l Te n s i o n
Adjustment Screw; do
not overtighten.
3
Center Mark
Jaw Lock Knob
Pan Lock Knob
Panning Index Marks
Ball Lock Lever
Mounting
Stud
Tension
Adjustment
Screw
¼”-20
Female
Socket
16mm Ball
90º Drop
Notch
1
3
Produkspesifikasjoner
| Merke: | Really Right Stuff |
| Kategori: | Stativ |
| Modell: | BPC-16 |
Trenger du hjelp?
Hvis du trenger hjelp med Really Right Stuff BPC-16 still et spørsmål nedenfor, og andre brukere vil svare deg
Stativ Really Right Stuff Manualer
11 Desember 2024
11 Desember 2024
11 Desember 2024
11 Desember 2024
11 Desember 2024
11 Desember 2024
11 Desember 2024
11 Desember 2024
11 Desember 2024
11 Desember 2024
Stativ Manualer
- Stativ Bauhn
- Stativ Hama
- Stativ Neewer
- Stativ Godox
- Stativ Kogan
- Stativ DJI
- Stativ Sony
- Stativ Vello
- Stativ Manfrotto
- Stativ Kodak
- Stativ Celly
- Stativ Sachtler
- Stativ IOptron
- Stativ Tiltall
- Stativ Square Jellyfish
- Stativ Proaim
- Stativ Libec
- Stativ Gravity
- Stativ Alpine
- Stativ Celestron
- Stativ Glide Gear
- Stativ Vanguard
- Stativ Vinten
- Stativ Stalco
- Stativ Auray
- Stativ SteadiCam
- Stativ ARRI
- Stativ Fidlock
- Stativ Vortex
- Stativ Robus
- Stativ Miller
- Stativ Studio Assets
- Stativ Easyrig
- Stativ Magnus
- Stativ Peak Design
- Stativ Hohem
- Stativ Flycam
- Stativ IFootage
- Stativ Cartoni
- Stativ HPRC
- Stativ Rollei
- Stativ FeiyuTech
- Stativ Velbon
- Stativ 3 Legged Thing
- Stativ FLM
Nyeste Stativ Manualer
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
13 Januar 2025
13 Januar 2025
13 Januar 2025
13 Januar 2025
13 Januar 2025
13 Januar 2025