Rikon 10-600VS Bruksanvisning
Les nedenfor 📖 manual på norsk for Rikon 10-600VS (16 sider) i kategorien Bli verre. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/16
10-600VS
www.rikontools.com
10-600VSM3
16 VS Scroll Saw”
Operator’s Manual
Record the serial number and date of purchase in your manual for future reference.
Serial Number: _________________________ Date of purchase: _________________________
For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877) 884-5167
The serial number can be found on the specication label on the rear of your machine.
2
TABLE OF CONTENTS
SPECIFICATIONS
NOTE: The specications, photographs, drawings and information in this manual represent the current model
when the manual was prepared. Changes and improvements may be made at any time, with no obligation on
the part of Rikon Power Tools, Inc. to modify previously delivered units. Reasonable care has been taken to
ensure that the information in this manual is correct, to provide you with the guidelines for the proper safety,
assembly and operation of this machine.
Motor Amps, Volts, Hertz ........................................... 1.2 A (1/8HP), 120 V, 60 Hz
Electronic Variable Speed (SPM) ........................................................ 550 - 1,650
Blade Length ...................................................................................................... 5”
Cutting Height Maximum .....................................................................................2”
Stroke ...........................................................................................................19/32”
Throat Depth .............................................................................................. 15-3/4”
Table Size (WxD) .....................................................................10-1/16” x 16-5/16”
Table Tilting ......................................................................................... 0° - 45° Left
Dust Port Diameter ....................................................................................... 1-3/8”
Maximum Sound Level (idle) ....................................................................... <76dB
Rotary Flex Shaft Speed (RPM) ..................................................... 3,300 - 10,000
Overall Size (HxWxD)............................................. 14-15/16" x 12-9/16" x 29-3/4"
Base Size (approx.) ............................................................................. 9” x 15-1/2”
Net Weight ................................................................................................ 26.4 lbs
Specications.....................................................................................................................2
Safety Instructions ........................................................................................................3 - 6
Getting To Know Your Machine ..............................................................................................7
Contents of Package ..................................................................................................... 7 - 8
Assembly .................................................................................................................... 8 - 9
Operation .................................................................................................................. 10 - 12
Maintenance ................................................................................................................... 12
Electricals & Wiring Diagram ....................................................................................... 5 & 13
Troubleshooting ......................................................................................................... 13
Parts Diagram ......................................................................................................... 14
Parts List ........................................................................................................................ 15
Warranty ......................................................................................................................... 16
SAVE THESE INSTRUCTIONS.
Refer to them often.
3
SAFETY SYMBOLS
IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following
instructions must be followed at all times. Failure to follow all instructions listed below may result in electric shock,
re, and/or serious personal injury.
There are certain applications for which this tool was designed. We strongly recommend that this tool not be modied
and/or used for any other application other than that for which it was designed. If you have any questions about its
application, do not use the tool until you have contacted us and we have advised you.
SAFETY INSTRUCTIONS
GENERAL SAFETY
KNOW YOUR POWER TOOL. Read the owner’s manual
carefully. Learn the tool’s applications, work capabilities,
and its specic potential hazards.
BEFORE USING YOUR MACHINE
To avoid serious injury and damage to the tool, read and
follow all of the Safety and Operating Instructions before
operating the machine.
1. Some dust created by using power tools contains
chemicals known to the State of California to cause cancer,
birth defects, or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement, and other
• masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area and work
with approved safety equipment, such as those dust masks
that are specially designed to lter out microscopic
particles.
2. the entire Owner’s Manual. how to use READ LEARN
the tool for its intended applications.
3. If the tool is supplied with a 3 GROUND ALL TOOLS.
prong plug, it must be plugged into a 3-contact electrical
receptacle. The 3rd prong is used to ground the tool and
provide protection against accidental electric shock. DO
NOT remove the 3rd prong. See Grounding Instructions
on the following pages.
4. AVOID A DANGEROUS WORKING ENVIRONMENT.
DO NOT use electrical tools in a damp environment or
expose them to rain.
5. use electrical tools in the presence of DO NOT
ammable liquids or gasses.
6. ALWAYS keep the work area clean, well lit, and
organized. work in an environment with oor DO NOT
surfaces that are slippery from debris, grease, and wax.
7. KEEP VISITORS AND CHILDREN AWAY. DO NOT
permit people to be in the immediate work area,
especially when the electrical tool is operating.
8. to perform an operation DO NOT FORCE THE TOOL
for which it was not designed. It will do a safer and
higher quality job by only performing operations for
which the tool was intended.
9. wear loose WEAR PROPER CLOTHING. DO NOT
clothing, gloves, neckties, or jewelry. These items can
get caught in the machine during operations and pull the
operator into the moving parts. The user must wear a
protective cover on their hair, if the hair is long, to
prevent it from contacting any moving parts.
10. CHILDPROOF THE WORKSHOP AREA by
removing switch keys, unplugging tools from the
electrical receptacles, and using padlocks.
11. ALWAYS UNPLUG THE TOOL FROM THE
ELECTRICAL RECEPTACLE when making adjust-
ments, changing parts or performing any maintenance.
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. This symbol may be used
in conjunction with other symbols or pictographs.
Indicates an imminently hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious
injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in minor or
moderate injury.
NOTICE: Shown without Safety Alert Symbol indicates a situation that may result in property damage.
Produkspesifikasjoner
| Merke: | Rikon |
| Kategori: | Bli verre |
| Modell: | 10-600VS |
Trenger du hjelp?
Hvis du trenger hjelp med Rikon 10-600VS still et spørsmål nedenfor, og andre brukere vil svare deg
Bli verre Rikon Manualer
28 Desember 2024
28 Desember 2024
28 Desember 2024
28 Desember 2024
28 Desember 2024
28 Desember 2024
28 Desember 2024
28 Desember 2024
Bli verre Manualer
- Bli verre MSW
- Bli verre Bosch
- Bli verre DeWalt
- Bli verre Stihl
- Bli verre Gude
- Bli verre Hitachi
- Bli verre Milwaukee
- Bli verre Makita
- Bli verre Einhell
- Bli verre Spear & Jackson
- Bli verre Metabo
- Bli verre Vonroc
- Bli verre Black And Decker
- Bli verre Powerplus
- Bli verre Ozito
- Bli verre Craftsman
- Bli verre Maruyama
- Bli verre Solo
- Bli verre Silverline
- Bli verre Evolution
- Bli verre Triton
- Bli verre Stalco
- Bli verre Fieldmann
- Bli verre Prime3
- Bli verre Yellow Garden Line
- Bli verre Extralink
- Bli verre Ergotools Pattfield
- Bli verre Proviel
- Bli verre Bavaria
- Bli verre Black Decker
- Bli verre Sovereign
- Bli verre King Craft
- Bli verre Global
- Bli verre Herkules
- Bli verre Bavaria By Einhell
- Bli verre Prowork
- Bli verre Backyard Pro
- Bli verre Pro-Cut
- Bli verre Trotec
Nyeste Bli verre Manualer
7 Januar 2025
4 Januar 2025
1 Januar 2025
31 Desember 2025
31 Desember 2025
31 Desember 2025
31 Desember 2025
31 Desember 2025
31 Desember 2025
30 Desember 2025