Scanstrut SC-CW-04E Bruksanvisning
Scanstrut
Batterilader
SC-CW-04E
Les nedenfor 📖 manual på norsk for Scanstrut SC-CW-04E (2 sider) i kategorien Batterilader. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/2
1
4a
7
Input voltage range : 10-30V DC (12/24V system)
Input current max: 1.5A
Output power: 5W (5V, 1A)
Standby current draw: < 0.03W
Waterproof rating: IPX6 front and back
Certications: Qi, CE, FCC, ROHS,
UNECE R10 E24
5
6
Retain installation jig to use in step 2.
Ensure there is sufcient clearance in chosen
installation area.
205mm
(8”)
- Feed cable through the hole.
- Apply sealant to p1-x4 screws.
- Screw product in place.
- Remove installation jig.
Connect wires to 12/24V supply,
ensuring a waterproof connection. Fuse
according to input voltage and current.
4b Ensure ROKK Active is vertical.
Use drilling template to drill ø6mm (0.24”)
cable hole and p1-x4 pilot holes
(see tools required table).
Ensure installation area is at.
ROKK ACTIVE TOP
ROKK ACTIVE TOP
ROKK ACTIVE TOP
Tools required.
Pozi screwdriver
6mm (0.24”) drill bit
Drill bit (for pilot hole)
DRILLING TEMPLATE
SCALE 1:1
ø6mm
ø 2
m
m
TOP
(0.07”)
(0.24”)
ø 2
m
m
(0.07”)
ø 2
m
m
(0.07”)
ø 2
m
m
(0.07”)
37mm
(1.5”)
37mm
(1.5”)
31mm
(1.2”)
Material No. 4 Screw
Soft Material
E.g plywood
2mm
(5/64”)
Hard Material
E.g Fiberglass
acrylic, hardwood
2.5mm
(3/32”)
Check Scale 50mm
Parts list.
ROKK Wireless
Active
x1
x4
No. 4 x 3/4” (18mm)
self-tapping screw
x1
Installation jig
Installation instructions.
ROKK Wireless - Active (SC-CW-04E)
18-01-2020 (Issue 8)
Technical information.
READ IMPORTANT SAFETY INFORMATION
LEAFLET BEFORE INSTALLING.
2
3
For latest tech info visit: www.scanstrut.com/rokk-wireless
This product is designed to securely mount phones under normal usage conditions. The end-
user is entirely responsible for conditions in which their device is used. See WARRANTY section
for further details.
Scanstrut recommends installation is carried out by a
incorrect installation.
WARNING:
This product is to be connected to a 12V DC or 24V DC battery power source only.
The power supply must be switched off before installation.
An appropriate fuse or circuit breaker must be used between the battery / power source and
this product. Check for correct polarity of all wiring before switching the power on.
This product may contain high voltages. Do not tamper with the product.
Before drilling any holes, ensure the area behind the mounting location is clear of wires, fuel and
all other hazardous objects.
If the product needs to be mounted outside, it must be mounted in a location safely above the
waterline, where it is not at risk of being submerged.
Smart LED light guide:
Solid red
Product has power and ready to charge.
Solid green
Product charging.
Flashing red
1. Foreign object detection:
metallic object placed on top
that is not Qi compatible.
or
2. Thermal cutout:
internal temperature is too high/ low.
Wait for product to return to operating temperature.
Flashing green/red
Input current is too low.
IN EXTREME USAGE ENVIRONMENTS
PERFORMANCE MAY VARY.
CAUTION:
compatible devices.
The cable must be retained and not interfere with mechanical systems.
This product contains no user serviceable components. Do NOT attempt to repair or alter the product
in any way.
This product will charge through non-metallic phone cases up to ~3mm thick. Phone cases may alter
overall charge performance.
When used in a very high/low ambient temperature/direct or prolonged sunlight the product may
temporarily shut down, this is a safety feature of the electronics.
porous, smooth surface.
When selecting a mounting location, avoid places exposed to heat-radiating appliances and poorly
ventilated areas.
EMC INSTALLATION GUIDELINES:
Scanstrut products conform to Electromagnetic Compatibility (EMC) regulations, to ensure that
electromagnetic interference between equipment is minimised.
Correct installation is required to ensure that electromagnetic
interference is kept to a minimum.
WIRING:
When extending the cable from battery/power source to the product, ensure there is consistently a
minimum of 10V being provided to the product. A wire gauge of 18AWG (0.82mm2) is recommended
for any length of cable extension.
The schematic in step 7 is to illustrate how the product should be connected to a 12V DC or 24V DC
battery/power supply.
ENVIRONMENTAL PROTECTION:
Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice.
IMPORTANT:
Scanstrut Ltd. accepts no responsibility for any injuries or other damages arising from the use of their
products in any circumstances.
WARRANTY:
A 2 year, non-transferrable warranty covers this Scanstrut product only and not any devices that
are mounted in it or on it. No warranty is given for users’ devices and users expose their devices to
hazards, known or unknown, at their own risk.
USER GUIDE:
Place device centrally within the ROKK Wireless Edge jaws.
CARE: wash down carefully with fresh water.
Produkspesifikasjoner
| Merke: | Scanstrut |
| Kategori: | Batterilader |
| Modell: | SC-CW-04E |
Trenger du hjelp?
Hvis du trenger hjelp med Scanstrut SC-CW-04E still et spørsmål nedenfor, og andre brukere vil svare deg
Batterilader Scanstrut Manualer
29 Januar 2025
29 Januar 2025
28 Januar 2025
28 Januar 2025
28 Januar 2025
Batterilader Manualer
- Batterilader MSW
- Batterilader DeWalt
- Batterilader Hama
- Batterilader Schwaiger
- Batterilader IKEA
- Batterilader StarTech.com
- Batterilader APSystems
- Batterilader Sony
- Batterilader Nitecore
- Batterilader Yamaha
- Batterilader Trust
- Batterilader Husqvarna
- Batterilader Voltcraft
- Batterilader Digitus
- Batterilader Panasonic
- Batterilader Shure
- Batterilader Delta
- Batterilader Anker
- Batterilader Growatt
- Batterilader EMOS
- Batterilader Deye
- Batterilader Ryobi
- Batterilader Kenwood
- Batterilader Milwaukee
- Batterilader Ansmann
- Batterilader Makita
- Batterilader Einhell
- Batterilader Anova
- Batterilader V-Tac
- Batterilader Mophie
- Batterilader Envertec
- Batterilader Celly
- Batterilader Metabo
- Batterilader Dometic
- Batterilader V7
- Batterilader Xvive
- Batterilader Craftsman
- Batterilader Manhattan
- Batterilader Jackery
- Batterilader Rocstor
- Batterilader Techno Line
- Batterilader Hilti
- Batterilader Monster
- Batterilader Twelve South
- Batterilader Hive
- Batterilader Silverline
- Batterilader ISDT
- Batterilader Bebob
- Batterilader Yard Force
- Batterilader Huawei
- Batterilader Ventev
- Batterilader PDP
- Batterilader Sungrow
- Batterilader Vimar
- Batterilader Mean Well
- Batterilader Xtorm
- Batterilader AVer
- Batterilader Osram
- Batterilader HyperX
- Batterilader Savio
- Batterilader Digipower
- Batterilader Apa
- Batterilader Bolt
- Batterilader Watson
- Batterilader HQ Power
- Batterilader Black Decker
- Batterilader EGO
- Batterilader Xblitz
- Batterilader SWIT
- Batterilader IDX
- Batterilader NOCO
- Batterilader Cellular Line
- Batterilader Alogic
- Batterilader SKROSS
- Batterilader Sandberg
- Batterilader Gp Batteries
- Batterilader Victron Energy
- Batterilader Absina
- Batterilader Awelco
- Batterilader EA Elektro Automatik
- Batterilader Aim TTi
- Batterilader Ergotron
- Batterilader Recom
Nyeste Batterilader Manualer
9 April 2025
9 April 2025
9 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
31 Mars 2025
30 Mars 2025
26 Mars 2025