Sonic Alert SB200ss-v3 Bruksanvisning

Sonic Alert Overvåkingskamera SB200ss-v3

Les nedenfor 📖 manual på norsk for Sonic Alert SB200ss-v3 (5 sider) i kategorien Overvåkingskamera. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/5

English from PO#22955 SB200ss-v3 093-HK093-027 27-03-2013

Sonic Boom Travel & Bed side Alarm Clock with Bed Shaker

Model SB200ss- v3

IMPORTANT – Please read these instructions carefully before use and retain for future reference. See operating instructions

on back.

-- Use only the supplied or recommended Sonic Alert adaptor to connect the unit.

Warning: To prevent ﬁre or shock hazard do not expose this appliance to rain or moisture. Before connecting to mains make sure that

the requirements speciﬁed on the apparatus corresponds to the available power supply i.e. AC 240V~. 100 –

-- The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper, table cloths, curtains, etc;

-- No naked ﬂame sources, such as lighted candles, should be placed on the apparatus.

-- It shall not be exposed to dripping or splashing and that no objects ﬁlled with liquids, such as vases, shall be placed on the apparatus.

-- Do not place the product in closed bookcases or racks without proper ventilation.

OPERATION INSTRUCTIONS

IMPORTANT- please read these instructions carefully before use and retain for future reference.

FEATURES

1. Alarm 1 indicator (AL1)

9. Snooze Button/ Snooze

Duration Adjustment/

Dimmer Control

2. Alarm Mode Switch

10. Tone Control

3. PM indicator

11. Alarm Selector

4. Alarm Oﬀ Button

12. Alarm 2 indicator (AL2)

5. Alarm Set Button / Alarm

Duration Adjustment

13. Volume Control

6. Fast Button/ 12 /24

hour Selector

14. DC 9V input

7. Slow Button

15 . Vibrator input

8. Time Set Button

16. Battery Compartment

English from PO#22955 SB200ss-v3 093-HK093-027 27-03-2013

Alarm –

Enable Alarms:

1) To enable Alarm 1, slide the “ALARM SELECTOR ”(11) to AL1 position. the alarm indicator

“ “AL1 (1) will light up.

2) To enable Alarm 2, slide the “ALARM SELECTOR “(11) to AL2 position, the alarm indicator

“ ”AL2 2(1 ) will light up.

3) To enable both alarms, slide the “ALARM SELECTOR “(11) to AL1+AL2 position, the alarm

indicators “AL1 (1) and AL2 (12) “ “ “ will light up.

To Select Wake up mode

To select the wake up mode, slide the “Alarm Mode Switch (2“) to your desired position:-

a) BUZZ for sound b) VIB for bed shaker c) VIB/ BUZZ“ “ “ “ “ “ for both sound and bed

shaker

NOTE: once the wake up mode is chosen, this will apply to both alarms.

Alarm Patterns –

When the alarm is activated, alarm pattern of the buzzer / flashi display will be out of sync ng

with the vibrator. This means th when the buzzer / ﬂashing display is ON, the vibrator will be OFF at

and while the buzzer/ ﬂashing display is OFF, the vibrator will be ON.

ALARM 1 - When Alarm 1 is activate, it will have 3 beeps for buzzer, then the vibrator. This

pattern is repeated until the alarm is stopped.

ALARM 2 - When Alarm 2 is activate, it will have 4 beeps for buzzer, then the vibrator. This

pattern is repeated until the alarm is stopped.

Adjusting The Alarm Duration Time

The default alarm duration time setting is minutes; you may adjust the alarm duration between 1 30

minute and 59 minutes as desired. To adjust the alarm duration:

• Press and hold the AL. SET button (5) for six seconds. The clock display sh the default will ow

alarm duration as . Release the ‘30’AL SET button (5).

• Press the “ ” button SLOW (7) to adjust the alarm duration to the desired setting, from 1 minute to

59 minutes.

• When the display is showing the desired alarm duration time, it will return to the normal clock

mode after 3 seconds. The new alarm duration time setting becomes the new default and remains

in the memory until you change it again.

Snooze Operation –

1. When the alarm turns on in the morning you may press the SNOOZE Button (9) to stop the

alarm temporarily. The alarm will shut off for 9 minutes or for the predetermined time you

select from 1-30 minutes, and then turn on again. The snooze operation may be repeated

indeﬁnitely until the alarm is turned off.

2. The SNOOZE function of Alarm 1 and Alarm 2 is independent of each other.

English from PO#22955 SB200ss-v3 093-HK093-027 27-03-2013

Adjusting The Snooze Time

The default snooze time setting is 9 minutes but you may adjust the snooze time between 1

minute and 30 minutes as desired. To adjust the snooze time:

• Press and hold the SNOOZE Button (9) for four seconds. The clock display will show the

default snooze time 9 . Release the snooze button ‘ ’

• Press the “SLOW (7)“ Button to adjust the snooze time to the desired setting, from 1 minute

to 30 minutes.

• When the display is showing the desired snooze time, after 3 seconds it will return to the normal

clock mode. The new snooze time setting becomes the new default and remains in the memory

until you change it again.

Shutting Oﬀ the Alarm –

Alarm can be shut off temporary for the day or permanently shut off.

1) When alarm goes off, press the “ALARM OFF (4)” button to turn oﬀ for the day and come back

on at the same time the next day, if alarm settings have not changed.

2) To shut the alarm oﬀ permanently, slide the “ Alarm Mode Switch“ (11) down to the OFF

position. The alarm will not come on until the “ Alarm Mode Switch“ (11) is set to VIB/BUZZ“ “,

“ “ “ “VIB , or BUZZ position.

NOTE: The Alarm Oﬀ function of Alarm 1 and Alarm 2 is independent of each other.

Dimmer Operation

There is a 5-level brightness control for the LED display. Press the SNOOZE button (9) once to

change the display brightness. The brightness will cycle from 5-4-3-2-1-2-3-4-5 (from bright to dim

then from dim to bright).

*NOTE*: The dimmer function will not work, when the clock is in snooze mode.

Volume Control –

1) To adjust the volume, rotate VOLUME wheel (13) located on the lower right corner of the clock.

Tone Control –

1) To adjust the TONE, turn the TONE wheel (10) located on the top right corner of the clock.

Bed Shaker / Vibrator –See Figure B

1) Attach the bed shaker jack to the back of clock at “VIBRATOR INPUT (15)“.

2) To turn on vibrator, slide “Alarm Mode Switch (2)” to VIB/BUZZ or VIB position. “ “ “ “

3) Place vibrator between mattress and box spring.

Battery Backup –

To use the battery backup, you can install a 9-volt alkaline battery in the back of the clock located under

the Battery Compartment Cover (16). The battery needs to be purchased separately. Note the LED

Produkspesifikasjoner

Merke:	Sonic Alert
Kategori:	Overvåkingskamera
Modell:	SB200ss-v3

Trenger du hjelp?

Hvis du trenger hjelp med Sonic Alert SB200ss-v3 still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Overvåkingskamera Sonic Alert Manualer

Sonic Alert SB200ss-v3 Bruksanvisning

11 Januar 2025

Overvåkingskamera Manualer

Nyeste Overvåkingskamera Manualer

GVI Security videoPLUS AOU-112N Bruksanvisning

16 Januar 2025

GVI Security autoIP NRD-213M Bruksanvisning

16 Januar 2025

Milesight MS-C3567-FPNA Bruksanvisning

16 Januar 2025

GVI Security videoPLUS AID-112N Bruksanvisning

16 Januar 2025

GVI Security autoIP NID-2151 Bruksanvisning

15 Januar 2025

Arlo Essential XL Bruksanvisning

15 Januar 2025

TP Link Tapo C425 KIT Bruksanvisning

15 Januar 2025

EMOS H4057 Bruksanvisning

14 Januar 2025

EMOS H4064 Bruksanvisning

14 Januar 2025

AVer PTZ231 Bruksanvisning

13 Januar 2025