SoundTube SM590I-II-WX Bruksanvisning

SoundTube Høyttaler SM590I-II-WX

Les nedenfor 📖 manual på norsk for SoundTube SM590I-II-WX (6 sider) i kategorien Høyttaler. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/6
Box contents
1 Speaker
1 Terminal weather boot
1 Mounting bracket
1 Safety cable
1 Safety cable anchor screws
1 Euroblock connector
1 Grille-mounted tap switch cover
© 2011 SoundTube Entertainm t, Inc. en All rights reserved. PN INS-SM5 rev 11.30.11
Install Instructions For:
SM500i-II, SM500i-II-WX, SM590i-II, SM590i-II-WX speaker
1.435.647.9555
|
800.647.TUBE
|
www.soundtube.com
Do not spec or install speaker near support beam, ventilation duct or
other structure that may interfere with speaker function or dispersion.
gninraWgninraW
SoundTube s a rs must be ins d by a pr essional au o in aller/contractor. For sa ty and for pe ke talle of di st fe
optimum audio performa e, ins ller must ow l dire ons issued by SoundTube E er inment.nc ta foll al cti nt ta
SM5 Series
SM500i- , II S XM500 -Wi-II , S i-M590 II, S AM590i-II-WX UL1480 (UE Y) planned
1 Allen hex key
Terminal
weather boot
Clamp knob
Euroblock conn toec r
Grill moe- unted
tap switch cover
Mounting bracket
Tap switch
1
M3x4mm security screw
1. Unpack speaker and
mounting hardware.
2. Choose a secure mounting
sur
strength to reliably hold the
speaker. Note: Bracket
6. Use supplied screw to
connect the safety cable to
one of the inserts on the
rear panel of the speaker.
7. 8.
4. Connect signal wire to
4-pin Euroblock plug. Tighten
unused terminal screws. Use
inside positive and negative
inputs for either voice coil or
distributed systems. For
daisy chaining, use outside
positive and negative
terminals.
3. Slip terminal weather
boot over signal wire. For
environmental applications,
put RTV silicone around
nipple and base when
installation is complete.
11. Select the tap position by
removing the rubber plug on
g lle to access ary switch. ri rot
Switch is preset to maximum
tap setting in 70.7 V mode.
Select desired se ing andtt
reinsert rubber plug.
5. Insert -pin Euroblock 4
plug into Euroblock jack on
rear of speaker. Connectors
are keyed for polarity.
Install Instructions For:
SM500i-II, SM500i-II-WX, SM590i-II, SM590i-II-WX speaker
1.435.647.9555
|
800.647.TUBE
|
www.soundtube.com
SM5 Series
orientation does not matter
for installation of the
mounting bracket.
Terminal eath w er boot
will seal the encl ure on os
rear of speaker.
Line up bracket ribs with
mounting tube slots and
press speaker onto bracket.
Twist clockwise until speaker
clicks. Speaker is now locked
in place.
If speaker is within reach
of the public, or extra security
is desired, install the included
M3x4mm security screw.
10. Make sure knob is loose,
and aim speaker in desired
direction (0 to 90). Tighten
the knob to lock the speaker
in place. FINGER TIGHT IS
SUFFICIENT- DO NOT OVER
TIGHTEN.
To loosen, use included hex
key.
6
4
3
2
1
6
8
4
6
4
3
2
1
6
8
.0
5
1
2
4
12. Done.
1.
2.
9. Firmly grip speaker and
pull it away from the wall to
rotate to to desired mounting
angle about the mounting
shaft axis. Simply release
speaker back toward the wall
to lock into place.
1.
2.
Connect other end of the
safety cable to a secure
mounting point.
Specifications: SM590i
System Type
Impedance (Nominal)
Sensitivity dB @ 2.83V / 1 M
Sensitivity dB @ 1 W / 1 m3
Frequency Response (- 3 dB)1
Frequnecy Response (-10 dB)1
Max. Program Power
Max. Continuous Power RMS2
Max. SPL dB @ 1 m
Coverage Angle (-6 dB @ 2 kHz)
Coverage Angle (-6 dB @ 10 kHz)
Coverage Angle (Avg. 2 to 10 kHz)
Angle of Pointability (vertical)
Angle of Pointability (horizontal)
Directivity Factor (Q)
Directivity Index (DI)
Tap Selector
Low-Frequency Driver
High-Frequency Driver
Low-Frequency Voice Coil
Crossover Frequency
Network Type: Low-Pass
Network Type: High-Pass
Enclosure Material
Motor Board
Grille
Inputs
Colors
Height
Width
Depth (Including Bracket)
Weight
Shipping Weight
Included Accessories
Optional Accessories
Packaging
Regulatory - CE
Regulatory - IP
RoHS
5.25-inch coaxial, surface-mount, ported, high power (33-watt
transformer for 25/70.7/100-volt or transformer bypass)
8 ohm
87 dB
87 dB
100 Hz - 22 kHz
69 Hz - 22 kHz
160 W
80 W
106 dB
90º horizontal / 90º vertical
6 horizontal / 6vertical
80º horizontal / 85º vertical
0 - 1 upward / 0 - 29º downward
+/- 3
5.69 (Averaged 100 Hz - 10 kHz); 9.3 @ 2 kHz
6.0 dB (Averaged 100 Hz - 10 kHz); 9.7 dB @ 2 kHz
Six-position rotary switch with transformer bypass
1 x 133 mm (5.25 in) polypropylene cone, butyl rubber surround
25 mm (1.0 in) convex titanium horn-loaded tweeter
25 mm (1.0 in)
3 kHz
N/A
12 dB per octave, 2nd order
Injection-molded ABS
Cast aluminum
Powder-coated aluminum
Four-pin, 5.08 mm Euroblock for individual or daisy chain
connection
Black or white (Custom colors available)
317.0 mm (12.48 in)
216.7mm (8.53 in)
305.1 mm (12.01 in)
4.3 kg (9.5 lbs)
10.9 kg (24.0 lbs) two per box
Mounting hardware, safety cable, Euroblock connector
and terminal weather boot
Stainless steel U-bracket (AC-SM-UB5), pole mount adaptor
(AC-SM-PMA5), bent shaft (AC-SM-BS5)
Two per box, can ship individually
Approved
*Port plugs must be installed to meet IP55
Approved
© 2010 SoundTube Entertainment. All rights reserved. PN TS-SM590 REV 10.07.11
Key Features
• High-power output (106.0 dB) for long
throw and high SPL requirements.
• One 5.25 inch (133 mm) polypropylene
woofer and one 1.0 inch (25 mm) horn-
loaded convex titanium dome tweeter
mounted to a proprietary cast-alumi-
num baffle and heat sink.
87.0 dB average sensitivity offers high
output capabilities and reduced amplifi-
cation costs.
• Includes weatherized components for
indoor/outdoor applications.
• Easy-access, six-position selectable tap
switch for 25-, 70.7- and 100-volt applica-
tions with transformer bypass position.
Aluminum grille with powder-coat fin-
ish
• Includes a tool-free SpeedLeverTM cap-
tured ball mounting system for a fast
and secure installation.
• Vertical and horizontal pivoting offer
precision aiming for indoor and outdoor
applications.
• Pan and tilt capabilities
CE approved
• High quality black or white paint finish.
Custom colors available.
• Included Accessories: Corrosion-resistant
captured ball mount, safety cable,
Euroblock connector and terminal
weather boot
Optional accessories: Pole-mount adap-
tor (AC-SM-PMA5), bent shaft (AC-SM-
BS5), U-bracket (AC-SM-UB5).
Description
The SM590i is a high-powered 5.25-inch,
two-way, horn-loaded loudspeaker in a
ported surface-mount enclosure that deliv-
ers effective low-end response (69 Hz @
-10 dB) and consistent dispersion pattern
(2 to 10 kHz, independently verified) .
The SM590i incorporates a low-profile grille,
proprietary motor-board and six-position
tap switch with transformer bypass. Mount-
ing hardware is included and features a
fast-action Speed LeverTM for easy and secure
installation with a proprietary captured
ball mounting system. Optional accessories
include a pole mount adaptor, a bent shaft
and a U-bracket.
Applications
Engineered for high SPL and effective
low-end response, the SM590i delivers
SM590i
Surface-Mount Speaker
Technical Information for System Engineers
Mounting hardware included
1 Fre q ue n cy r es po n se i s m ea su re d i n ha l f s pa ce
and includes a low-frequency peak > + 3 dB.
2 Continuous power rating, EIA-426-B test.
3 2.83 Volts at a distance of 1 meter.
70.7 V Output 100 V Output 25 V Output
33 W 102.0 dB 33 W 102.0 dB 5 W 94.0 dB
17 W 99.5 dB 17 W 99.5 dB 2.5 W 91.0 dB
9 W 96.5 dB 9 W 96.5 dB 1.3 W 88.0 dB
6 W 95.0 dB 6 W 95.0 dB 0.63 W 85.0 dB
3 W 92.0 dB
Transformer Taps

Produkspesifikasjoner

Merke: SoundTube
Kategori: Høyttaler
Modell: SM590I-II-WX

Trenger du hjelp?

Hvis du trenger hjelp med SoundTube SM590I-II-WX still et spørsmål nedenfor, og andre brukere vil svare deg




Høyttaler SoundTube Manualer

Høyttaler Manualer

Nyeste Høyttaler Manualer