Square Jellyfish Jelly Long Legs Bruksanvisning
Square Jellyfish
Stativ
Jelly Long Legs
Les nedenfor 📖 manual på norsk for Square Jellyfish Jelly Long Legs (2 sider) i kategorien Stativ. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/2
Thank you for purchasing the Square Jellysh Jelly Long Legs tripod. This
product is designed to be used with the Square Jellysh Spring Tripod Mount
for Tablets (sold separately). When used together, the tripod and spring
mount can support 7” tablets in both the vertical and horizontal positions.
The tripod may also be used alone for pocket cameras with standard screw
mounts. When not in use, the tripod legs fold up for added portability.
It couldn’t be easier
To use your Jelly Long Legs tripod, simply
attach the folded tripod to any device that
accepts a ¼ x 20 standard camera thread
screw. Once attached, unfold the legs to
their full position. Conrm that the set-
screw is tightened and place your camera
and Jelly Long Legs on a level surface of
your choosing. The rubber-tipped legs
help hold your tripod securely in place.
Alternatively, the legs of the tripod may
be individually adjusted in a range of angles. Using a screwdriver, slightly loosen
the set-screw and adjust each leg as desired. Then re-tighten the set-screw
and place your camera and Jelly Long Legs on a level surface. Check to make
certain your camera is well balanced; if not, adjust the legs as necessary.
Use common sense
• The Jelly Long Legs tripod is designed to hold the camera steady while taking
a picture. It is not designed to be mounted to a moving object or vehicle.
• Do not place your camera and Jelly Long Legs tripod where they can easily
fall a distance that would cause damage to your camera. A small railing and the
edge of a cliff are just a few examples that come to mind.
• This product contains small parts that may be a choking hazard. Keep out of
reach of children.
www.squarejellysh.com
Designed in USA. Made in China. Patents pending.
JELLY LONG LEGS TRIPOD USER’S MANUAL
Jelly Long Legs shown
with Spring Tripod
Mount for Tablets
Set-screw
Jelly long legs trIpod prodUct warranty
www.squarejellysh.com
Designed in USA. Made in China. Patents pending.
warnIng
This product is designed to be used with the Square
Jellysh Spring Tripod Mount for Tablets (sold
separately). When used together, the tripod and
spring mount can support 7” tablets in both the
vertical and horizontal positions. The tripod may also
be used alone for pocket cameras with standard
screw mounts. This device is designed to support
lightweight, compact cameras up to 9 oz., and not
heavy cameras, SLRs, or any camera with a lengthy
lens or similar extension. Always support the camera
with one hand while you are tightening it in place
with the other hand. While still supporting it, wiggle
the camera a bit to make sure that it will not tip over
when you release it, because this might damage
your camera! Only you can make a safe evaluation
of whether your camera is secure and balanced
because of the innite number of settings which you
may choose.
lIMIted warranty
The Square Jellysh Jelly Long Legs tripod
is warranted against defects in materials and
workmanship for a period of ONE (1) YEAR from the
date of the original retail purchase. If a defect exists
the manufacturer will, at its option and to the extent
permitted by law, (1) repair the product at no charge
using new or refurbished parts; or (2) exchange
the product with a functionally equivalent product
that is new or refurbished; or (3) refund the original
purchase price. This warranty excludes damage
resulting from abuse, accident, modications or
other causes that are not defects in the materials or
workmanship. To the extent permitted by applicable
law, the manufacturer is not liable for any direct,
indirect, incidental or consequential damage
arising out of the use of service of the product,
including, but not limited to damage which may
be caused to any camera, or to any other device
the Square Jellysh Jelly Long Legs tripod is used
to support. To the extent permitted by applicable
law the manufacturer of the Square Jellysh Jelly
Long Legs tripod disclaims all implied warranties of
merchantability and tness for a particular purpose.
If implied warranties cannot be disclaimed, then such
warranties are limited in duration to the duration of
this warranty. This warranty gives you specic legal
rights, and you may have other rights which vary from
state to state.
To obtain warranty service, contact Square
Jellysh using the information provided at www.
squarejellysh.com
To the extent permitted by applicable law proof of
purchase for all warranty repairs/replacement is
required.
Produkspesifikasjoner
| Merke: | Square Jellyfish |
| Kategori: | Stativ |
| Modell: | Jelly Long Legs |
Trenger du hjelp?
Hvis du trenger hjelp med Square Jellyfish Jelly Long Legs still et spørsmål nedenfor, og andre brukere vil svare deg
Stativ Square Jellyfish Manualer
20 Oktober 2024
20 Oktober 2024
20 Oktober 2024
Stativ Manualer
- Stativ Neewer
- Stativ Kogan
- Stativ Vello
- Stativ Manfrotto
- Stativ Kodak
- Stativ Proaim
- Stativ Libec
- Stativ Gravity
- Stativ Celestron
- Stativ Glide Gear
- Stativ Vanguard
- Stativ Vinten
- Stativ ARRI
- Stativ Fidlock
- Stativ Vortex
- Stativ Robus
- Stativ Miller
- Stativ Studio Assets
- Stativ Easyrig
- Stativ Magnus
- Stativ Peak Design
- Stativ Hohem
- Stativ Flycam
Nyeste Stativ Manualer
28 Oktober 2024
28 Oktober 2024
28 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024