StarTech.com ECUSB3S11 Bruksanvisning

Les nedenfor 📖 manual på norsk for StarTech.com ECUSB3S11 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 5 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: May 8, 2019 3:44 PM
Product Diagram (ECUSB3S11)
Component Function
1Express Card Port Used to connect the to the Express Card Host
Computer’s Express Card Slot.
Requirements
For the latest requirements, please visit .
www.startech.com/ECUSB3S11
An available ExpressCard port
Microsoft® Windows® XP, Vista, 7, or 8 / Server 2003, or Server 2008 R2
Installation
Hardware installation
Note: Turning the computer o to insert/remove is not necessary as ExpressCard
they are hot-pluggable.
1. Slide the (card label side up) into an on the ExpressCard Port Express Card Slot
Host Computer.
2. Push the into the , until it clicks and locks into Express Card Express Card Slot
place.
3. To eject the , simply push the card further into the slot until it clicks, Express Card
and then release and it will then be automatically ejected from the slot.
1 Port Flush Mount SuperSpeed USB 3.0 ExpressCard
Notes: Some t loosely into an This has the ExpressCard/34 ExpressCard/54 Slot.
potential to cause movement and can result in accidental disconnection. A snap-on 34
mm to 54 mm stabilizer bracket is included for such installations.
Optional: For some high-powered USB 3.0 devices, additional power may be required.
Connect the USB to DC adapter cable from a USB port on the computer system to the
DC plug on the card. This will provide additional power to the USB 3.0 port.
Driver Installation
Windows XP/Server 2003/Vista/7/Server 2008 R2/8
1. Insert the included into the . Driver CD Host Computer’s CD/DVD Drive
Note: If the wizard appears on the screen, select or Found New Hardware Cancel
close the window and do not install the drivers.
2. The will automatically launch, click to display the contents on the . If not, CD CD
open ( in XP) and double-click on the . Computer My Computer CD/DVD
3. Enter the folder , then and click the le . USB 3.0 Host NEC Setup.exe
4. This should launch the driver Installation wizard. Continue through the wizard and
once complete, all the necessary drivers will be installed.
Specications
Bus Interface ExpressCard 2.0 USB 3.0 base specication 1.0 Intel xHCI
specication 0.95
Form Factor “Slim” ExpressCard/34 (34mm)
Chipset ID NEC/Renesas µPD720202
Connectors 1 x USB 3.0 type A female
1 x DC Power female (type A)
Maximum Data Transfer
Rate USB 3.0: 5Gbps*
Operating Temperature 0°C ~ 50°C (32°F ~ 122°F)
Storage Temperature -10°C ~ 85°C (14°F ~ 185°F)
Humidity 5% ~ 95% RH
Dimensions (LxWxH) 75mm x 34mm x 5mm
Weight 17.5g
1
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void
the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a three-year warranty.
For further information on product warranty terms and conditions, please refer to .
www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Safety Measures
If product has an exposed circuit board, do not touch the product under power.
Mesures de sécuri
Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
安全対策
• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください
Misure di sicurezza
Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
Säkerhetsåtgärder
Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.

Produkspesifikasjoner

Merke: StarTech.com
Kategori: Ikke kategorisert
Modell: ECUSB3S11

Trenger du hjelp?

Hvis du trenger hjelp med StarTech.com ECUSB3S11 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert StarTech.com Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer