StarTech.com MONSTADQI Bruksanvisning
StarTech.com
Flatpanelstøtte
MONSTADQI
Les nedenfor 📖 manual på norsk for StarTech.com MONSTADQI (2 sider) i kategorien Flatpanelstøtte. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 10, 2020
Product Diagram (MONSTADQI)
Component Function
1Stand Top with
Integrated Qi Charger
• 23.6 x 9.8 inches (600 x 250 mm) surface area
• Holds a , a Monitor Mobile Device with
Wireless Charging Capabilities, and a
Notebook/Paper Documents
2Legs
• Adjustable height:
• Legs folded down - 3.3 inches (83.5 mm)
• Legs folded up - 4.5 inches (115.5 mm)
3Qi Charger • 15W Charging for a Mobile Device with
Wireless Charging Capabilities
4Power Cable • Connect the (included) to Power Adapter
provide power to the Qi Charger
Requirements
For the latest requirements and full manual, please visit:
www.startech.com/MONSTADQI.
• Mobile Device with Wireless Charging Capabilities x 1
• Clean, Flat, and Stable Surface
Installation
Assembling the Monitor Riser
1. Determine the desired height for the .Stand Top
Monitor Riser with Integrated Qi Charging Pad
2. (Optional -- Increase the height of the ) Rotate the Monitor Riser Legs Height
Adjustment Arms Legs Height found on the sides of the out and up. The
Adjustment Arms Legs Height pivot from a single point in the . Ensure all four
Adjustment Arms have been fully rotated out and up before proceeding to the next
step. (Figure 1)
3. Place the , top side down, onto a .Stand Top Clean, Flat, and Stable Surface
4. Align the two on one of the with the two in the Pegs Legs Holes Stand Top.
(Figure 2)
5. Firmly press the two on one of the into the two in the Pegs Legs Holes Stand Top.
6. Repeat steps 4-5 to install the second .Leg
7. Flip the upright and position it on a Monitor Riser Assembly Clean, Flat, and
Stable Surface for use.
8. Connect the to the and to an available . Power Adapter Power Cable Power Source
1
2
4
3
Figure 1
Figure 2
Pegs
Warning Statements
Make sure that you assemble this product according to the instructions.
Do not exceed the weight capacity of this product. Overloading this product might result in injury or property damage.
This product can support the following weight: 33 lb. (15 kg).
This product is intended for indoor use only and should not be used outdoors.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to .
www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
Operation
Charge a Mobile Device
Note - if your Mobile Device is housed within an external Case: Check with the
manufacturer of your to determine if the Case Mobile Device with Wireless Charging
Capabilities Case can be Qi charged with the installed.
• Place a onto the center of the Mobile Device with Wireless Charging Capabilities
Qi Charger found on the right-side of the Stand Top with Integrated Qi Charger.
(Figure 3)
Adjusting the Height of the Monitor Riser
1. Remove the Monitor Mobile Device with Wireless Charging Capabilities, , and
Notebook/Paper Documents from the Monitor Riser Assembly.
2. Disconnect the from the and the .Power Adapter Power Source Power Cable
3. Place the , top side down, onto a Monitor Riser Assembly Clean, Flat, and Stable
Surface.
4. Remove the from the . Wiggle the back and forth while pulling Legs Stand Top Legs
them up and out of the . Stand Top
Warning: Always exercise caution while removing the . The should always be Legs Legs
slowly yet rmly shifted back and forth while removing them to prevent any damage to
the or . Legs Stand Top
5. Rotate the found on the sides of the out and up to Height Adjustment Arms Legs
increase the height or out and down to decrease the height. The Height Adjustment
Arms Legs Height Adjustment Armspivot from a single point in the . Ensure all four
have been fully rotated before proceeding to the next step.
6. Follow steps 4-6 from to reinstall the .
Installation - Assembling the Monitor Riser Legs
7. Flip the upright and position it on a Monitor Riser Assembly Clean, Flat, and Stable
Surface for use.
8. Connect the to the and to an available . Power Adapter Power Cable Power Source
Figure 3
Produkspesifikasjoner
| Merke: | StarTech.com |
| Kategori: | Flatpanelstøtte |
| Modell: | MONSTADQI |
Trenger du hjelp?
Hvis du trenger hjelp med StarTech.com MONSTADQI still et spørsmål nedenfor, og andre brukere vil svare deg
Flatpanelstøtte StarTech.com Manualer
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
Flatpanelstøtte Manualer
- Flatpanelstøtte Schwaiger
- Flatpanelstøtte Nabo
- Flatpanelstøtte Sanus
- Flatpanelstøtte Kogan
- Flatpanelstøtte Newstar
- Flatpanelstøtte Gembird
- Flatpanelstøtte My Wall
- Flatpanelstøtte Digitus
- Flatpanelstøtte Dell
- Flatpanelstøtte B-tech
- Flatpanelstøtte Blaupunkt
- Flatpanelstøtte Speaka
- Flatpanelstøtte Chief
- Flatpanelstøtte V7
- Flatpanelstøtte Manhattan
- Flatpanelstøtte Rocstor
- Flatpanelstøtte Mount-It!
- Flatpanelstøtte Proaim
- Flatpanelstøtte CTA Digital
- Flatpanelstøtte Avteq
- Flatpanelstøtte Heckler
- Flatpanelstøtte GPX
- Flatpanelstøtte Vogels
- Flatpanelstøtte Peerless-AV
- Flatpanelstøtte Multibrackets
- Flatpanelstøtte SunBriteTV
- Flatpanelstøtte Atdec
- Flatpanelstøtte Gabor
- Flatpanelstøtte NeoMounts
- Flatpanelstøtte LTN Technologies
Nyeste Flatpanelstøtte Manualer
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025