STI 9105 Bruksanvisning

STI Termostat 9105

Les nedenfor 📖 manual på norsk for STI 9105 (1 sider) i kategorien Termostat. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/1
INSTALLATION OF STI-9105 & STI-9105-S THERMOSTAT COVER
All specifications and information shown were current as of publication and are subject to change without notice.
9105IS NOV2005
Safety Technology International, Inc.
2306 Airport R terford, Michigan 48327-1209oad • Wa
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: info@sti-usa.com
Web: www.sti-usa.com
Safety Technology International (Europe) d.Lt
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: info@sti-europe.com Web: www.sti-europe.com
INSTALLATION INSTRUCTIONS
1. Do not remove thermostat. Prior to drilling anchor holes, cover thermostat
with a damp cloth to prevent dust from penetrating the sensor.
2. Center frame over existing thermostat. Mark and drill (4) anchor holes using
a 1/4 in. (6.3mm) drill bit. Insert the (4) anchors and complete installation
as shown.
The (3) tabs on the frame must face upward (View A).NOTE:
3. Insert the (3) slots on the cover over tabs on the top surface of frame.
Rotate cover downward onto the frame and turn key to lock. Electronic warranty form at www.sti-usa.com/wc14
CLEANING INSTRUCTIONS
To clean cover, remove from wall. Rinse with water to remove abrasive dust and
dirt. Wash with soap or mild detergent using a soft cloth (DO NOT SCRUB). Rinse
once more, then dry with a soft cloth or chamois. To remove grease or wet paint,
rub gently with a cloth wetted thoroughly with naphtha. Then wash and rinse. DO
NOT USE RAZOR BLADES.
VIEW A
91051 COVER
9105 FRAME
EXISTING FLUSH
MOUNT THERMOSTAT
KEY (2) PROVIDED
PART OF COVER ASSEMBLY
19033 ANCHOR
(4) PROVIDED
9105 FRAME
CENTER FRAME OVER
EXISTING THERMOSTAT
MARK AND DRILL (4) 1/4 in.
(6.3mm) HOLES AND COMPLETE
ASSEMBLY AS SHOWN.
91051 COVER AND
LOCK ASSEMBLY
19013 SCREW
(4) PROVIDED
FRAME TABS
THE THREE (3) COVER
TABS MUST FACE UPWARD.
DRILL (4) HOLES .25 in.
(6.3mm) DIAMETER
SEE ABOVEVIEW A
A
STI-9105 (CLEAR)
STI-9105-S (SMOKE)
SURFACE MOUNT INSTALLATIONS
FOR ADDTIONAL CLEARANCE A
SUB SPACER KIT MUST BE ORDERED.
SUB-901 2 in. (50mm) DEPTH
SUB-905 1.25 in. (32mm) DEPTH
A
8.2 in.
(207mm)
6.9 in.
(174mm)
6.3 in.
(159mm)
5.6 in.
(141mm)
A
B
B2.6 in.
(65mm)
3.3 in.
(83mm) 4.9 in.
(126mm)
6.2 in.
(159mm) .9 in.
(23mm)
3.2 in.
(81mm)
3.3 in.
(84mm)
6.9 in.
(176mm)

Produkspesifikasjoner

Merke: STI
Kategori: Termostat
Modell: 9105

Trenger du hjelp?

Hvis du trenger hjelp med STI 9105 still et spørsmål nedenfor, og andre brukere vil svare deg




Termostat STI Manualer

STI

STI 9105 Bruksanvisning

27 Oktober 2024
STI

STI -9110 Bruksanvisning

16 Oktober 2024
STI

STI -9102 Bruksanvisning

16 Oktober 2024

Termostat Manualer

Nyeste Termostat Manualer