Sun Joe 24V-HCS-4-LTE Bruksanvisning

Sun Joe Ikke kategorisert 24V-HCS-4-LTE

Les nedenfor 📖 manual på norsk for Sun Joe 24V-HCS-4-LTE (24 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 5 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/24

A Division of Snow Joe, LLC

OPERATOR’S MANUAL

Model 24V-HCS-4-LTE Form No. SJ-24V-HSC-4-LTE-880E-M

CORDLESS PRUNING SAW

24V MAX* | 2.0 Ah | 4-INCH

*DISCLAIMER: Initial no-load voltage, when fully charged,

peaks at 24V; nominal voltage under typical load is 21.6V.

SAVE THESE INSTRUCTIONS

Original instructions.

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, ﬁre and/

or serious injury. Save all warnings and instructions for future

reference.

mDANGER! This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

mWARNING! This indicates a hazardous situation, which, if

not avoided, could result in serious injury or death.

mCAUTION! This indicates a hazardous situation, which, if

not avoided, could result in minor or moderate injury.

Intended Use

This cordless pruning saw was designed and manufactured for

trimming and pruning tree limbs and branches and for cutting

smaller logs not to exceed a max. cut of 3.5 in. (8.9 cm) in

diameter depending on the type of wood. All of the wooden

objects intended to be cut with this pruning saw should be no

thicker than the guide bar's maximum cutting capabilities.

Any other use diﬀering from the above mentioned applications

poses a serious hazard to the user and may damage both the

tool and your personal property. Improper use of the machine

will invalidate the warranty and relieve the manufacturer from all

liabilities. The user will consequently be liable for all and any

damage or injury to himself/herself or others.

General Power Tool Safety

Warnings

mWARNING! Read all safety warnings, instructions,

illustrations and speciﬁcations provided with this power tool.

Failure to follow all instructions listed below may result in

electric shock, ﬁre and/or serious injury. Save all warnings and

instructions for future reference.

Work Area Safety

1. Keep work area clean and well lit – Cluttered or dark areas

invite accidents.

2. Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases or

dust – Power tools create sparks which may ignite the dust

or fumes.

3. Keep children and bystanders away while operating a

power tool – Distractions can cause you to lose control.

Electric Safety

mWARNING! Do not expose a battery pack or appliance

to ﬁre or excessive temperature. Exposure to ﬁre or temperature

above 265°F (130°C) may cause explosion.

1. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools – Unmodified plugs and

matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators – There

is an increased risk of electric shock if your body is earthed

or grounded.

3. Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts – Damaged or

entangled cords increase the risk of electric shock.

4. When operating a power tool outdoors, use an extension

cord suitable for outdoor use – Use of a cord suitable for

outdoor use reduces the risk of electric shock.

5. If operating a power tool in a damp location is

unavoidable, use a RESIDUAL CURRENT DEVICE (RCD)

protected supply – Use of an RCD reduces the risk of

electric shock.

Personal Safety

1. Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power

tool while you are tired or under the inﬂuence of drugs,

alcohol or medication – A moment of inattention while

operating power tools may result in serious personal injury.

2. Use personal protective equipment. Always wear

eye protection – Protective equipment such as a dust mask,

non-skid safety shoes, hard hat, or hearing protection used

for appropriate conditions will

reduce personal injuries.

3. Prevent unintentional starting. Ensure the switch is in the

oﬀ-position before connecting battery pack, picking up

or carrying the tool – Carrying power tools with your finger

on the switch or energizing power tools that have the switch

on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on – A wrench or a key left attached

to a rotating part of the power tool may result

in personal injury.

5. Do not overreach. Keep proper footing and balance at

all times – This enables better control of the power tool in

unexpected situations.

6. Dress properly. Do not wear loose clothing or jewelry.

Keep your hair, clothing and gloves away from moving

parts – Loose clothes, jewelry or long hair can be caught in

moving parts.

7. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used – Use of dust collection can

reduce dust-related hazards.

8. Do not let familiarity gained from frequent use of tools

allow you to become complacent and ignore tool safety

principles. A careless action can cause severe injury within

a fraction of a second.

Power Tool Use and Care

1. Do not force the power tool. Use the correct power tool

for your application – The correct power tool will do the job

better and safer at the rate for which it was designed.

2. Do not use the power tool if the switch does not turn it

on and oﬀ – Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

3. Disconnect the battery pack from the power tool before

making any adjustments, changing accessories, or

storing power tools – Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

4. Store idle power tools out of the reach of children and do

not allow persons unfamiliar with the power tool or these

instructions to operate the power tool – Power tools are

dangerous in the hands of untrained users.

5. Maintain Appliance With Care – Keep cutting edge sharp

and clean for best performance and to reduce the risk of

injury. Follow instructions for lubricating and changing

accessories. Inspect appliance cord periodically, and

if damaged, have it repaired by an authorized service

facility. Inspect extension cords periodically and replace

if damaged. Keep handles dry, clean, and free from oil and

grease.

6. Check Damaged Parts – Before further use of the

appliance, a guard or other part that is damaged should

be carefully checked to determine that it will operate

properly and perform its intended function. Check for

alignment of moving parts, binding of moving parts,

breakage of parts, mounting, and any other condition

that may affect its operation. A guard or other part that

is damaged should be properly repaired or replaced by an

authorized service center unless indicated elsewhere in this

manual.

7. Use the power tool, accessories etc. in accordance

with these instructions, taking into account the working

conditions and the work to be performed – Use of the

power tool for operations different from those intended could

result in a hazardous situation.

8. Keep handles and grasping surfaces dry, clean and

free from oil and grease. Slippery handles and grasping

surfaces do not allow for safe handling and control of the

tool in unexpected situations.

Battery Tool Use and Care

mWARNING! Read all safety warnings and instructions.

Failure to follow the warnings and instructions may result in

electric shock, ﬁre and/or serious injury.

1. Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of fire when used with another

battery pack.

2. Use appliances only with specifically designated battery

packs. Use of any other battery packs may create a risk of

injury and fire.

3. When the battery pack is not in use, keep it away from other

metal objects, like paper clips, coins, keys, nails, screws

or other small metal objects that can make a connection

from one terminal to another. Shorting the battery terminals

together may cause burns or a fire.

4. Under abusive conditions, liquid may be ejected from the

battery; avoid contact. If contact accidentally occurs, flush

with water. If liquid contacts eyes, additionally seek medical

help. Liquid ejected from the battery may cause irritation or

burns.

5. Do not use a battery pack or appliance that is damaged

or modified. Damaged or modified batteries may exhibit

unpredictable behavior resulting in fire, explosion or risk of

injury.

6. Do not expose a battery pack or appliance to fire or

excessive temperature. Exposure to fire or temperature

above 104°F (40.5°C) may cause explosion.

7. Follow all charging instructions and do not charge the

battery pack or appliance outside of the temperature range

specified in the instructions. Charging improperly or at

temperatures outside of the specified range may damage the

battery and increase the risk of fire.

8. Do not modify or attempt to repair the appliance or the

battery pack (as applicable) except as indicated in the

instructions for use and care.

Service

1. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

2. Never service damaged battery packs. Service of battery

packs should only be performed by the manufacturer or

authorized service providers.

Safety Instructions for

Pruning Saws

General Pruning Saw Safety Warnings

• Keep all parts of the body away from the saw chain

when the pruning saw is operating. Before you start the

pruning saw, make sure the saw chain is not contacting

anything. A moment of inattention while operating the

pruning saw may cause entanglement of your clothing or

body with the saw chain.

• Hold the power tool by insulated gripping surfaces only,

because the saw chain may contact hidden wiring. Saw

chains contacting a "live" wire may make an exposed metal

part of the power tool "live" and give the operator an electric

shock.

• Wear safety glasses and hearing protection. Further

protective equipment for head, hands, legs and feet is

recommended. Adequate protective clothing will reduce

personal injury by flying debris or accidental contact with the

saw chain.

• Always keep proper footing and operate the pruning saw

only when standing on a fixed, secured and level surface.

Slippery or unstable surfaces such as ladders may cause a

loss of balance or control of the saw.

• When cutting a limb that is under tension, be cautious

of spring back. When the tension in the wood fibers is

released, the spring-loaded limb may strike the operator and/

or throw the pruning saw out of control.

• Use extreme caution when cutting brush and saplings.

The slender material may catch the saw chain and be

whipped toward you or pull you off balance.

• Carry the saw by the handle with the saw switched oﬀ

and away from your body. When transporting or storing

the saw, always ﬁt the guide bar cover. Proper handling of

the saw will reduce the likelihood of accidental contact with

the moving saw chain.

• Follow instructions for lubricating, chain tensioning and

changing accessories. An improperly tensioned or poorly

lubricated chain may either break or increase the chance for

kickback.

• Cut wood only. Do not use the pruning saw for any other

purpose. For example, do not use the pruning saw to cut

plastic, masonry or non-wood building materials. Using

the pruning saw in these incorrect ways could result in

serious damage to you and your tool.

• Keep guards in place. Protective guards should be checked

periodically to ensure they are properly fitted and in correct

working order.

• Do not grasp the exposed cutting blade or cutting edges

when picking up or holding the saw. Be sure to encase the

cutting bar in its protective sheath when not in use.

• This saw is not intended for tree felling. Use of the saw

for operations different than intended could result in serious

injury to the operator or bystanders.

Causes and operator prevention of

kickback

Kickback may occur when the nose or tip of the guide bar

touches an object, or when the wood closes in and pinches the

saw chain in the cut.

Tip contact in some cases may cause a sudden reverse

reaction, kicking the guide bar up and back towards the

operator.

Pinching the saw chain along the top of the guide bar may push

the guide bar rapidly back towards the operator.

Either of these reactions may cause you to lose control of the

saw, which could result in serious personal injury. Do not rely

exclusively upon the safety devices built into your saw. As a

pruning saw user, you should take several steps to keep your

cutting jobs free from accident or injury.

Kickback is the result of tool misuse and/or incorrect operating

procedures or conditions and can be avoided by taking proper

precautions as given below:

• Maintain a firm grip, with thumb and fingers encircling

the saw handle and position your body and arm to allow

you to resist kick-back forces. Kick-back forces can be

controlled by the operator, if proper precautions are taken.

Do not let go of the saw.

• Do not overreach and do not cut above shoulder height.

This helps prevent unintended tip contact and enables better

control of the unit in unexpected situations.

• Only use replacement bars and chains specified by the

manufacturer. Incorrect replacement of bars and chains

may cause chain breakage and/or kickback.

• Never use a dull or loose chain. Keep the chain sharp and

properly tensioned.

• Follow the manufacturer’s sharpening and maintenance

instructions for the saw chain. Decreasing the depth gauge

height can lead to increased kickback.

Additional safety instructions

for Pruning Saw

• The pruning saw is designed for cutting branches. Only

use the pruning saw as indicated in this manual for cutting

wood. The machine has not been designed for continuous,

professional use.

• Keep the pruning saw out of reach of children. It is not a toy.

Produkspesifikasjoner

Merke:	Sun Joe
Kategori:	Ikke kategorisert
Modell:	24V-HCS-4-LTE

Trenger du hjelp?

Hvis du trenger hjelp med Sun Joe 24V-HCS-4-LTE still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Ikke kategorisert Sun Joe Manualer

Sun Joe 24VBAT-XR8 Bruksanvisning

7 Januar 2025

Sun Joe SJFP30 Bruksanvisning

7 Januar 2025

Sun Joe SBJ6-GA Bruksanvisning

7 Januar 2025

Sun Joe GGNP-S3 Bruksanvisning

7 Januar 2025

Sun Joe SJ-APS-022 Bruksanvisning

7 Januar 2025

Sun Joe 24VBAT-XR12 Bruksanvisning

7 Januar 2025

Sun Joe 24V-HCS-4-LTE Bruksanvisning

7 Januar 2025

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer

Amazfit Bip 5 Unity Bruksanvisning

16 Januar 2025

Lowepro Flipside Trek BP 350 AW II Bruksanvisning

16 Januar 2025

Audison Prima APS 8 D Bruksanvisning

16 Januar 2025

Black Line BLMH 36 Bruksanvisning

16 Januar 2025

Absco M 151151 Bruksanvisning

16 Januar 2025

ADDAC System ADDAC200CT Bruksanvisning

16 Januar 2025

Emerio LR-131325.1 Bruksanvisning

16 Januar 2025

Sony WRT-822B Bruksanvisning

16 Januar 2025

IKEA SMÅSPORRE 204.570.22 Bruksanvisning

16 Januar 2025

IKEA SÄFFEROT 904.570.71 Bruksanvisning

16 Januar 2025