Techno Line WT 643 Bruksanvisning
Techno Line
Værstasjon
WT 643
Les nedenfor 📖 manual på norsk for Techno Line WT 643 (7 sider) i kategorien Værstasjon. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/7
WT643 Weather Station
Instruction Manual
The weather station desk clock combines the following functions:
– Time with Projection – Alarm – Calendar – Indoor and Outdoor Temperature
– Indoor and Outdoor Humidity – Weather Forecast
1. “MODE” button
2. “MIN / MAX” button
3. “▲ °C & F button ° ”
4. button “▼”
5. “SET / ALARM” button
6. “CHANNEL” button
7. BATTERY COMPARTMENT
8. AC/DC ADAPTER JACK
9. TIME PROJECTION FOCUS
10. CRYSTAL WEATHER FORECASTER
11. “SNOOZE / LIGHT” buttonButtons :
Getting started
Due to the heavy power consumption of the unit it is strongly recommended to
use the A/C adapter at all times.
1. Install the A/C adapter into the AC/DC ADAPTER JACK (8) hole
2. Install 3 x ‘AAA’ size batteries by sliding open the BATTERY
COMPARTMENT (7). Replace battery compartment door when finished.
See battery warnings below
3. When batteries are in use, the symbol of the battery will be shown on the
clock face when the batteries are low and need replacing.
4. The batteries in the unit will keep the time and other details working if and
when the A/C adapter is removed.
NOTE: If only batteries are being used one can illuminate the clock face for a
period of 20 seconds when the “ SNOOZE / LIGHT” button (11) is pressed.
When required, the unit can be reset to default setting by removing batteries
and / or A/C adapter and re-installing them.
The preset language is English (EN) after reset or after installation of batteries
and the date is Thursday (TH), 2009 January 1.
To set time:
1. Press and hold “SET / ALARM” button (5) for 2 seconds and the HOUR digits
will flash. Press C & F button (3) or button (4) to change “▲ ° ° ” “▼”
the
HOUR setting.
2. Press “SET / ALARM” button (5) again and the MINUTE digits will flash.
Press C & F button (3) or button (4) to change the “▲ ° ° ” “▼”
MINUTE setting.
3. Press “SET / ALARM” button (5) again to change the date/month month/date
setting. Press C & F button (3) or button (4) to change. “▲ ° ° ” “▼”
4. Press “SET / ALARM” button (5) again and the LANGUAGE digits will flash.
Press C & F button (3) or button (4) to change the “▲ ° ° ” “▼”
LANGUAGE
setting. (*See below for language settings)
5. Press “SET / ALARM” button (5) again and the YEAR digits will flash.
Press C & F button (3) or button (4) to change the YEAR “▲ ° ° ” “▼”
setting.
6. Press “SET / ALARM” button (5) again and the MONTH digits will flash.
Press C & F button (3) or button (4) to change the MONTH “▲ ° ° ” “▼”
setting.
7. Press “SET / ALARM” button (5) again and the DATE digits will flash.
Press C & F button (3) or button (4) to change the DATE “▲ ° ° ” “▼”
setting.
8. Press “SET / ALARM” button (5) again to change between 24-hour clock and
AM/PM. Press C & F button (3) or button (4) to change. “▲ ° ° ” “▼”
“ ”24H
indicates 24-hour clock. “12H” indicates AM / PM.
9. Press “SET / ALARM” button (5) to confirm.
*Language setting: -The unit is equipped with 7 languages for the screen display.
Toggle between these languages: EN for English; –GE for German; IT for Italian;
FR for French; NE for Dutch; ES for Spanish; and DA for Danish.
NOTE: The preset language is English (EN) after reset or after installation of
batteries and the date is Thursday (TH), 2009 January 1.
To set the alarm:
1. Press “MODE” button (1) once to display the alarm time. This will be indicated
by an “AL” symbol.
2. Press and hold “SET / ALARM” button (5) for 2 seconds and the HOUR digits
will flash. Press C & F button (3) or button (4) to change “▲ ° ° ” “▼”
the HOUR
setting.
3. Press “SET / ALARM” button (5) again and the MINUTE digits will flash.
Press C & F button (3) or button (4) to change the MINUTE “▲ ° ° ” “▼”
setting.
4. Toggle by pressing “MODE” button (1) between ‘Actual Time’ and ‘Alarm Time”
To turn alarm on and off:
1. Toggle by pressing “MODE” button (1) between current time and alarm time
until alarm time is displayed.
2. Press “SET / ALARM” button (5) once to turn on alarm. A symbol will be
shown. Press “SET / ALARM” button (5) again to turn off alarm.
3. The alarm will sound once the preset alarm time has been reached.
Press “SET / ALARM” button (5) to deactivate the alarm.
4. Press and hold the “SNOOZE / LIGHT” button (11) for approximately 3
seconds to activate snooze. The alarm will sound again after 5 minutes for 1
minute and 59 seconds.
Interpreting the weather forecast symbols
Produkspesifikasjoner
| Merke: | Techno Line |
| Kategori: | Værstasjon |
| Modell: | WT 643 |
Trenger du hjelp?
Hvis du trenger hjelp med Techno Line WT 643 still et spørsmål nedenfor, og andre brukere vil svare deg
Værstasjon Techno Line Manualer
9 Januar 2025
5 Januar 2025
28 Desember 2024
28 Desember 2024
28 Desember 2024
28 Desember 2024
28 Desember 2024
28 Desember 2024
28 Desember 2024
28 Desember 2024
Værstasjon Manualer
- Værstasjon Fluke
- Værstasjon La Crosse Technology
- Værstasjon GoGEN
- Værstasjon Sencor
- Værstasjon Brandson
- Værstasjon Bearware
- Værstasjon Taylor
- Værstasjon TFA
- Værstasjon Renkforce
- Værstasjon Davis
- Værstasjon Ade
- Værstasjon Setti+
- Værstasjon GlobalTronics
- Værstasjon EQ-3
- Værstasjon Goddess
- Værstasjon Auriol
- Værstasjon Baldr
Nyeste Værstasjon Manualer
16 Januar 2025
16 Januar 2025
12 Januar 2025
10 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
7 Januar 2025