Tripp Lite SmartRack SRIN4101010 Bruksanvisning

Tripp Lite Ikke kategorisert SmartRack SRIN4101010

Les nedenfor 📖 manual på norsk for Tripp Lite SmartRack SRIN4101010 (24 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/24
Installation Guide
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
Español 7 • Français 13 • Русский 19
NEMA-4 Single-Lock
Metal Enclosure
Models:
SRIN410106, SRIN4101010, SRIN410146, SRIN4101410,
SRIN412126, SRIN4121210, SRIN414146, SRIN4141410
Series Numbers: (AC0043, AC004C, AC004B, AC004A, AC0049, AC0048, AC0047, AC0046)
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!
tripplite.com/warranty
2
Components List
Installation
IMPORTANT:
Ensure you have received all parts according to the component checklist prior to installing. If any parts are
missing or faulty, visit tripplite.com/support for service.
x1
x4 x8 x1 x2
x1 (Metal)
x1 (Plastic)
1. Attach Mounting Feet to the Enclosure’s Rear Panel
Note: SRIN4141410 model shown. Enclosure
size and dimensions will differ by model.
3
Installation
• Installers are responsible for providing wall-mounting hardware. Use a minimum of two #10 x 2” or larger screws
(not included) to secure the enclosure in place.
• Make sure mounting screws are anchored into the center of the studs. Use of a stud finder is highly recommended.
• If there is no stud at the mounting location, it is recommended you use four anchors to secure the enclosure in place.
Due to the weight of the enclosure, plastic expansion wall anchors are not recommended for drywall installations.
Suitable anchors include: threaded drywall anchors, threaded drywall toggles, sleeve-type hollow wall anchors
(a.k.a. molly bolts) or toggle bolts.
• If placing the enclosure over a telecommunications receptacle, remove the wall plate, then fasten the enclosure to the
wall. Once secured, fasten the wall plate over the receptacle.
• If no telecommunications receptacle is available, a surface mount box (or biscuit jack) and equipment cord can be
mounted inside the unit.
• Use an adhesive-backed surface mount box.
2. Mount Enclosure to Wall
Mark the exact
location of the
mounting holes
Attach the
enclosure to
the wall
Drill pilot holes
Find a wood stud
location for mounting
the enclosure
(Mounting Hardware
Not Included)

Produkspesifikasjoner

Merke: Tripp Lite
Kategori: Ikke kategorisert
Modell: SmartRack SRIN4101010

Trenger du hjelp?

Hvis du trenger hjelp med Tripp Lite SmartRack SRIN4101010 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Tripp Lite Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer