V-Tac VT-55ST Bruksanvisning

V-Tac Lettelse VT-55ST

Les nedenfor 📖 manual på norsk for V-Tac VT-55ST (36 sider) i kategorien Lettelse. Denne guiden var nyttig for 5 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/36

INSTRUCTION MANUAL

LED STREET LIGHT WITH ADJUSTABLE ANGLE

TECHNICAL DATA

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions care-

fully before starting the installation and keep this manual handy for future reference. If you have any another query,

please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready

to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to

damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage

to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily

operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing

defects only.

MODEL VT-55ST VT-105ST

SKU 23618, 23619 23620, 23621

WATTS 50W 100W

LUMENS@WIDE CODE 4700 LM 9400 LM

BEAM ANGLE 100° 100°

DF >0.9 >0.9

CRI ≥80 ≥80

OPERATION

TEMPERATURE -20°C to +40°C -20°C to +40°C

LIFE SPAN 30,000 Hours 30,000 Hours

ON/OFF CYCLE 20,000 Times 20,000 Times

NET WEIGHT (g) 670 1035

INPUT VOLTAGE AC: 220-240V, 50/60Hz

MOUNTING DIAMETER 60 mm 60 mm

MOUNTING HEIGHT 3-5m 5-8 m

MAX. PROJECTED

AREA 20-30m230-40m2

BODY TYPE Aluminium+PC Aluminium+PC

DIMENSION 412x139x92mm 488x183x92mm

MULTI-LANGUAGE

MANUAL QR CODE

Please scan the QR code

to access the manual in

multiple languages.

This marking indicates that this product

should not be disposed of with other

household wastes.

Caution, risk of electric shock.

INSTALLATION INSTRUCTIONS

WARNING

1. Please make sure to turn o the power before starting the installation.

2. Installation must be performed by a qualiﬁed electrician.

3. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole

luminaire should be replaced.

4. If the external ﬂexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the man-

ufacturer or his service agent or a similar qualiﬁed person in order to avoid a hazard.

5. Replace any cracked protective shield.

6. Minimum distance from lighted objects 1m.

7. Terminal block not included.

8. Proper grounding should be ensured throughout the installation.

1. Switch O the power before starting the installation.

2. Connect the wiring (brown wire to Live wire, the blue line to Neutral wire,

yellow/green line to ground wire) to the luminaire as displayed in the wiring

diagram. Please make sure to use 3 core power cord and ensure the ground

wire must be grounded. (Outer wire size 250mm ±10mm)

3. Loosen the M6 screws using the screwdriver and install the streetlight on

the pole. Then tighten the M6 screws and ensure the streetlight is properly

installed on the pole. Or screw it directly to the wall.

4. Adjust the angle of the street light within a 180-degree range to suit your

lighting needs.

5. Switch On the power to test the light.

Neutral Supply can be Blue or Black

Ground Supply Can be Green-yellow

Live Supply Can be Red or Brown

WIRING DIAGRAM

1 2 3

Adjustable Angle

180°

Yellow Green

Brown

Blue

NOTE

• Wiring instructions: The power should be connected to binding post inside the junction box, which IP

grade should be higher than the lmap’s IP grade. And the junction box should have fasten device for

the wires. Inside terminal block shall conform to EN 60998-2-1 or EN 60998-2-2 (speciﬁcation: three

terminals, atleast 250V and 1.5mm2).

• User should prepare all the necessary accessories and spare parts (Spare parts not provided) includ-

ing junction box.

• Inspect the lamps and lanterns before installation to ensure no damage or deformation.

• Protect the lamps and lanterns during installation and maintenance, ensure all ﬁttings are ﬁxed,

connect the lamp body to the light pole using screws, and ensure the screw torque is less than 10.5

N.m.

• During maintenance and installation, ensure all parts are intact and replace any damaged or defective

parts.

• The lamps and lanterns use a double insulated wire for the power cord, replace it with a professional

if there’s any breakage to avoid danger.

• It’s normal for the lamps and lanterns surface to have a certain temperature when in use.

In case of any query/issue with the product, please reach out to us at: support@v-tac.eu

For More products range, inquiry please contact our distributor or nearest dealers.

V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B

Produkspesifikasjoner

Merke:	V-Tac
Kategori:	Lettelse
Modell:	VT-55ST

Trenger du hjelp?

Hvis du trenger hjelp med V-Tac VT-55ST still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Lettelse V-Tac Manualer

V-Tac VT-55ST Bruksanvisning

8 Januar 2025

V-Tac VT-952 Bruksanvisning

6 Januar 2025

V-Tac VT-983 Bruksanvisning

6 Januar 2025

V-Tac VT-719 Bruksanvisning

6 Januar 2025

V-Tac VT-984 Bruksanvisning

6 Januar 2025

V-Tac VT-969 Bruksanvisning

6 Januar 2025

V-Tac VT-80024 Bruksanvisning

5 Januar 2025

V-Tac VT-75001 Bruksanvisning

5 Januar 2025

V-Tac VT-75002 Bruksanvisning

4 Januar 2025

V-Tac VT-25W Bruksanvisning

29 Desember 2024

Lettelse Manualer

Nyeste Lettelse Manualer

COLBOR W60 Bruksanvisning

16 Januar 2025

IKEA BLÖTSNÖ 904.211.38 Bruksanvisning

16 Januar 2025

COLBOR W100 Bruksanvisning

16 Januar 2025

AD Trend 83513 Bruksanvisning

16 Januar 2025

COLBOR W60R Bruksanvisning

16 Januar 2025

Nedis WIFILS52CRGBW Bruksanvisning

16 Januar 2025

GVM PR150D Bruksanvisning

15 Januar 2025

GVM B200C Bruksanvisning

15 Januar 2025

Nedis BTTNTP-22W60 Bruksanvisning

15 Januar 2025

Nedis BTTNTP-44W120 Bruksanvisning

15 Januar 2025