Vello VB-1000 Bruksanvisning
Les nedenfor 📖 manual på norsk for Vello VB-1000 (4 sider) i kategorien Stativ. Denne guiden var nyttig for 5 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/4
ACTIONPAN
PROFESSIONAL GRADE
STABILIZING ACTION GRIP
USER MANUAL
VB-1000
2
Thank you for choosing a Vello
ActionPan Professional Grade
Stabilizing Action Grip.
The ActionPan gives you a
comfortable grip on your
shooting equipment, allowing
you to shoot extreme action
sports . u can use the steadily Yo
ActionPan to capture the action
from any angle – even low angles
– smoothly and with incredible
stability and control.
1. With one hand holding the
ActionPan and the other hand on
your camera or camcorder, align
the camera’s "-20 tripod mount 1/4
to any position along the mounting
platform.
2. Raise the camera away from the
mounting platform and slide the
mounting screw located on the
ActionPan’s underside to the
desired position.
3. Place your camera back on the
platform with its tripod mounting
socket positioned directly above
the ActionPan’s mounting screw.
Insert the mounting screw into
your camera’s tripod mounting
socket, and turn the knob of
the mounting screw until your
camera is securely attached to the
ActionPan’s mounting platform.
The mounting screw can be
loosened or tightened as required
f . or further adjustments
INTRODUCTION MOUNTING YOUR CAMERA OR CAMCORDER
3
The accessory shoe located on the top of
the ActionPan can be used to attach any
accessory such as a microphone, LED
light, or flash with a hot shoe or cold shoe
type connection.
1. Insert your accessory’s hot shoe
foot into the accessory shoe
mount.
2. Use your accessory’s locking
mechanism to lock the accessory in
place ensure that it is securely and
attached to the ActionPan.
To change the direction of the shoe
mount, for added control over your
accessory’s angle or direction:
1. Loosen or remove the mounting
screw connecting the accessory
shoe to the ActionPan’s handle
via the large knob located at the
underside of the handle’s tip
2. Reposition the accessory shoe
mount as desired
3. Tightly screw the mounting screw
back into the threaded socket of
the accessory shoe mount.
The accessory shoe can also be removed
if not needed by unscrewing its mounting
screw and removing the shoe mount.
ATTACHING ACCESSORIES
Produkspesifikasjoner
| Merke: | Vello |
| Kategori: | Stativ |
| Modell: | VB-1000 |
Trenger du hjelp?
Hvis du trenger hjelp med Vello VB-1000 still et spørsmål nedenfor, og andre brukere vil svare deg
Stativ Vello Manualer
28 Oktober 2024
Stativ Manualer
- Stativ Neewer
- Stativ Kogan
- Stativ Manfrotto
- Stativ Kodak
- Stativ Square Jellyfish
- Stativ Proaim
- Stativ Libec
- Stativ Gravity
- Stativ Celestron
- Stativ Glide Gear
- Stativ Vanguard
- Stativ Vinten
- Stativ ARRI
- Stativ Fidlock
- Stativ Vortex
- Stativ Robus
- Stativ Miller
- Stativ Studio Assets
- Stativ Easyrig
- Stativ Magnus
- Stativ Peak Design
- Stativ Hohem
- Stativ Flycam
Nyeste Stativ Manualer
28 Oktober 2024
28 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024