Vox 32VDH683B Bruksanvisning

Vox Fjernsyn 32VDH683B

Les nedenfor 📖 manual på norsk for Vox 32VDH683B (2 sider) i kategorien Fjernsyn. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
Please read this manual carefully before TV operation.
Retain it for future reference.
Quick Start Guide
For 32" - 58"
Unpack the TV and Accessories from the Carton Box
1. Please see the unpacking instructions on the top of the carton box (and below).
2. As noted, be careful not to grab or put pressure on the TV screen.
3. Check the carton box carefully for all included Accessories.
PREFACE
1. Read this Quick Start Guide before starting Set-up.
2. Then, carefully follow the Instructions, heeding all Warnings.
3. Do Not remove the TV back cover or block the TV ventilation openings.
4. Do Not use the TV near water or a heat Source.
5. Do not pinch or cut the Power Cord.
Note:
The product and illustrations in this Quick Start Guide is only for explanation purposes and may vary depending on
model.
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or
death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the television set.
- Only using furniture that can safety support the television set.
- Ensuring the television set is not overhanging the edge of the supporting furniture.
- Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both
the furniture and the television set to a suitable support.
- Not placing the television set on cloth or other materials that may be located between the television set and
supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the television set or its controls
If your existing television set is being retained and relocated, the same considerations as above should be applied.
The plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
WARNING
For 65" - 75"
DO NOT
DO NOT
USE BLADES
TO OPEN
UNPACK
WITH CARE
UNPACK
WITH CARE
Package Contents
TV x 1pc Quick Start Guide x 1pc
AAA Batteries for Remote x 2 pcsScrews for Table Stands
Remote Control x 1pc
Table Stands x 2 pcs
Attach the Table Stands Front panel
LED 32VDH683B
LED 43VDF683B
How to assemble the stand
If you need to remove or assemble the stand please read the following instructions.
- Before attaching/detaching the stand, make sure to turn off the TV.
- Before performing work, spread cushioning over the base area to lay the LED TV on. This will prevent it from being
damaged.
The buttons on the lower panel control your TV’s basic features, including the on-screen menu.
To use the more advanced features, you must use the remote control.
Please read this ma nual ca refully b efore TV operat ion.
Reta in it for future ref erence .
Quick Start Guide
KDL32VC683ANTS
KDG43VC683ANTS
• Head Screwdriver
• Internet Connection (Needed for Smart TV Streaming)
• Wireless Router (Needed for Smart TV Streaming)
Computer, Tablet or Smart Phone (Needed for Smart TV Set-Up)
Before installing the wall-mounted bracket, please screw the 4 wall-mounted
adapter studs into the 4 wall-mounted nuts of the metal back.
The figures and illustrations in this manual are provided for reference only and
may differ from their actual appearance.
Note:
1.The bracket fixed on the wall is an optional part.
2. When assembling the TV, there should be no other articles around it and please keep it distant from other articles.
3. When assembling the TV, please ask the professional worker to fix it in order to avoid danger.
4. The fixing picture is only for reference.
5. Please follow the user's manual about bracket assemble to fix the TV.
6. Attach the mounting bracket with the VESA compatible wall mounting kit.
Wallmounting Installation (optional)
Note: "D" is the effective length of the screw in the mounting hole.
Inches
32-43"
Specifications VESA
(A*B)
Standard screw
(C*D) Quantity
100 x 100 mm 4M6*L10
Step 1 Step 2
What You Will Need for Set-up (Not Included)
First Time use
When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take
approximately several minutes, just following TV’s guide to finish initialization.
Connecting to the Internet
To get access to the Internet, using a wired connection or connecting to an available wireless network.
It is recommended to use a modem or router that supports Dynaic Host Configuration Protocol(DHCP). Modems and
routers that support DHCP automatically provide the IP address, netmask, gateway, DNS Server 1 and DNS Server 2,
so you do not have to enter them manually. Most home networks already have DHCP. Configure network settings to
connect TV to an available network.
Using External Devices
You can connect various external devices to the TV. The types and shapes of connectors available vary depending on
your TV model. For the external device’s connection, refer to “Connecting to the External Devices”.
Setup via Mobile Phone
When you turn on the TV for the first time, the TV will support setup via your smart device by scanning the QR code.
If you scan the QR code to allow setup via the mobile app, setup of the TV will be more efficient.
Before performing setup with the mobile app, please make sure your mobile device has Bluetooth activated.
Note: The setup above is for referencing purpose and may differ depending on models/countries/regions.
Connecting to the External Devices
Satellite antenna
HDMI Device
Connects to the HDMI device. The HDMI interface can transfer
the digital video and audio on a single cable.
HDMI
Connect an antenna/cable/DVB-S2 to watch TV.
CABLE\ANT/RF
DVB-S2
Connects to VCR/Video game equipment/DVD player/Camcorder.
Composite cables transmit analogue signals. The video signal is
transmitted to the yellow terminal, and the audio signal is
transmitted to the red and white terminals.
Mini AV/AV IN
VIDEO
Yellow
White
Red
AUDIO
Mini AV in
Camcorder DVD player
Connects to an audio system with optical/coaxial audio input.
Optical/coaxial cables are used to transmit audio signals to
external speakers with low signal loss, optical/coaxial cables
can’t transmit video signals.
SPDIF/COAXIAL/OPTICAL
Audio Receiver
SPDIF
OPTICAL
COAXIAL
Connects to Digital still camera/Camcorder/USB storage media.
USB
Camcorder
Connects to the headphone jack to listen to sound from the TV.
Note: You cannot output sound from both the headphone and
the TV speakers at the same time.
Headphone
USB IN
If you connect a LAN cable, the TV will access network
automatically.
LAN
HDMI Device
To connect an audio system that supports eARC (Enhanced
Audio Return Channel) or ARC (Audio Return Channel),
connect to the HDMI port labeled “eARC/ARC” on the TV. It is a
feature that sends audio to an audio system that supports
eARC/ARC through an HDMI cable.
HDMI(eARC/ARC)
HDMI Device
Connects to the Home Controller. These jacks are for receiving
the external control signal. Enables extended control of the TV
using RS-232C via the RS-232C and IR IN jacks. RS-232C:
Connects to the RS-232C terminal of the home controller.
IR IN: Connects to the IR out terminal of the home controller.
HDMI(UART)
Insert a CI card.
CI
CI
card
CI
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories Licensing Corporation.
Remote control sensor / Power indicator
Middle key
In the standby mode, press the middle button to turn on the TV.
In the boot state, short press the middle button to shut down.
GBR
11.Trouble Shooting
10.SET-UP THE TV (Using the Remote Control)
Having trouble?
Don’t worry, it’s usually an easy fix.
Check your area is covered by Digital Video Broadcasts.
Try re-tuning or manually tuning missing channels.
Check that you are using the correct antenna type.
After Auto Tuning only
some channels are
available
Check if the channel has been blocked in the main menu
settings.
Channel cannot be
selected
Please check connecting USB cable and power supply is connected.
Hard drive has not been formatted. Please make sure USB disk is
compatible and the multimedia data formats are supported.
USB not playing
Compression of video contents may cause distortion especially on
fast moving pictures such as sports and action movies.
Picture is distorted,
macroblock, small block,
dots, pixelization, etc
Noise from speaker
Check cable connections, make sure a video cable is not connected
to an audio input.
Low signal level may cause sound distortion.
TV turns off automatically Check if the Off Timer is set to On in the Setup menu.
Sleep Timer may have been enabled.
If there is no signal for about 10 minutes from an input, the TV will
turn off.
TV turns on
automatically Check if the On Timer is set to On in the Setup menu.
Black bars on each side will be shown on HD channels when
displaying SD (4:3) contents.
Black bars on Top & Bottom will be shown on movies that have
aspect ratios different from your TV.
Adjust picture size option on your external device or TV to full screen.
Picture is not shown in
full screen
Note:
Some buttons and services may not be provided depending upon models or regions.
j k
l
m n
o
p q
r
s
1. Turn the TV on and off. POWER:
2. INPUT: Press this button to select the signal source.
3. : Directly select channel with digital buttons. Number Buttons(0-9)
4. Select electronic program guide, in DTV mode, it will display all the Guide:
information of program in a week when pressing this button.
5. CH.LIST: Displays program list.
It’s used in APPS.6. Color Buttons:
Display the main menu or exit the current menu.7. MENU :
8. Digital Media Player Control Buttons: Play/Pause, please refer to relevant instructions
in the section of multimedia player.
Press the up, down, left or right button to scroll the
9. Arrow Buttons (up/down/left/right):
menu and change menu item’s value.
10. OK: Confirm selection.
Returns to the previous screen.11.
Exit the menu.12. EXIT:
13. Press this button to display home page. HOME( ):
14. VOL( + / - ): Press these buttons to adjust the volume.
Press these buttons to change channel upward or downward.15. CH( / ):
16. Press to cut off the sound of the TV set, press again to resume. MUTE:
17. In USB mode, press this button to switch subtitles when movie is playing.SUBTITLE:
18. Press to select the teletext mode. Remote control may differ from the TEXT: Note:
above figures depending on the product model and region.
Press to display current channel information.19. INFO:
20. : You can press and hold the Edit button to re-customise.
21. Streaming service buttons : If network connects, press these keys to view video
streaming service directly.
Remote Buttons
Installing Batteries
1Open the battery compartment
cover on the back side.
2Insert two 1.5V AAA size batteries
in correct polarity. Don’t mix old or
used batteries with new ones.
3Point the remote towards the remote control
sensor of the TV and use it within 8 meters.
Put the used batteries into the recycling bin
since they can negatively affect the environment.
Closed the cover.
Note:
1) Batteries should last approximately one year under normal use (actual use will vary).
2) If the TV will remain inactive for an extended period of time, remove the batteries from the remote control
to avoid possible damage due to leakage.
3) Do not mix old and new batteries or different types of batteries.
4) Do not throw batteries into fire or water.
5) The batteries (battery pack or batteries installed) should not be exposed to excessive heat such as sunshine, fire or the like.
9.Prepare The Remote Control
Battery
Cover
2 x size
AAA 1.5V
View the embedded E-Manual that contains information about your TV's key features.
Launch the E-Manual
Press button on your remote control and select Settings > Support > E-Manual.
Enter the Home screen of the E-Manual.
Press button on your remote control and select TV, then press button on your remote control and
select E-Manual.
Enter Enjoy Live TV chapter to learn more about how to set up Live TV features.
Press button on your remote control and select Connection Guide.
Enter Connecting to External Devices chapter to learn more about how to connect external devices to your
TV and how to set up.
Note: • The black background icon indicates the button on the remote control.
• The grey background icon indicates the icons on the TV screen for selecting.
Home Screen
All TV functions can be accessed from the Home screen.
1 Navigation bar .
2. Apps
Note: Indicators or icons may vary depending on models/
countries/rigions.
Display the Home Screen
Press button on your remote control to enter the home screen. To exit the Home screen, press button on
your remote control or use the navigation buttons to move the focus to the input icon on the top of the screen,
press button to enter and select your desired input source.
Use the Navigation Bar
The navigation bar refers to indicators and icons on the top of the Home screen.
Search the content you want.Search:
Select the input source depending on the device you have connected to your TV.Input:
Manage TV configuration.Settings:
Allow pop-up notifications to appear for useful information and events that occur with your TV,Notifications:
including: and .Advertising, New Arrivals, Warnings and Legal Statements, System Messages Alexa Notification
You can enable/disable each of these notifications at Settings in the notification centre. You can view the list of event
messages generated by the TV.
7.Specifications
TV with stand
TV without stand
TV with stand
TV without stand
Standby consumption
Weight
(Net weight)
Dimensions
(LxWxH)
Model
LED panel resolution
Speaker output power
Power supply
Power consumption
Controller power
Work temperature
Display size
Antenna input
43" Diagonal (max.)
KDG43VC683ANTS
718x61x418mm
718x205x479mm
2.9kg
2.85kg
50W
o o
0 C-40 C
0.5W
5Wx2
DC 3V
(Two AAA size batteries)
75 ohms
1366x768
110-240V~, 50/60Hz
32" Diagonal (max.)
KDL32VC683ANTS
955x74x558mm
955x215x611mm
5.3kg
5.25kg
75W
VIDAA Acount
A VIDAA account provides all the best features of your Smart TV and ensures that all services are kept up to date.
For more information about VIDAA account, please refer to Benefits of Smart TV > Using a VIDAA Account in E-manual.
Guide
Quick access to Guide. For more information, please refer to Enjoy Live TV > Programme Guide(EPG) in E-manual.
Live TV
Quick access to Live TV. For more information, please refer to First-Time Use > Prepare Live TV in E-manual.
Use the Shortcuts
You can add inputs, channels and websites to the Home screen, to have quick access to them for your convenience.
Add and remove inputs
1. Press button.
2. Move the focus to an input you want to add to the Home screen and press > > .Add to home
The input icon will appear in Shortcuts on the Home screen.
Note:
Some options from the input source page cannot be added to the Home screen.
To remove the input from Shortcuts, move the focus to the shortcut, then press and hold the button on your
remote control.
Add and remove channels
1. In Live TV, press button to access the channel list.
2. Press button and press button to pick channel that you would like to add on the Home screen.
3. Select Add to home. The channel icon will appear in Shortcuts on the Home Screen.
Note:
To remove the channel from Shortcuts, move the focus to the shortcut, then press and hold the button on
your remote control.
Add and remove webpages
1. In Browser, visit a website you would like to add on the Home screen.
2. Use the D-pad to move the focus to the Menu icon in the top of the Browser navigation bar and select Add to
home.
3. Select Add and this webpage will appear in the Shortcuts on the Home screen.
Note:
To remove webpages from Shortcuts, move the focus onto the shortcut page, then press and hold the button
on your remote control.
1920x1080

Produkspesifikasjoner

Merke: Vox
Kategori: Fjernsyn
Modell: 32VDH683B

Trenger du hjelp?

Hvis du trenger hjelp med Vox 32VDH683B still et spørsmål nedenfor, og andre brukere vil svare deg