Wavtech Link1000.5plus Bruksanvisning

Wavtech Mottaker Link1000.5plus

Les nedenfor 📖 manual på norsk for Wavtech Link1000.5plus (8 sider) i kategorien Mottaker. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/8

Owner’s Manual

1000W RMS 5-Channel Ampliﬁer

link1000.5plus

www.wavtech-usa.com

• DO NOT DRIVE WHILE DISTRACTED. Any function that requires your prolonged attention should not be

performed while driving. Always stop the vehicle in a safe location before performing any such function. Failure to

do so may result in an accident.

• KEEP THE VOLUME AT MODERATE LEVELS WHILE DRIVING. Excess volume levels can obscure sounds such as

emergency vehicle sirens or road warning signals and may result in an accident. Continuous exposure to high sound

pressure levels may cause permanent hearing loss. Use common sense and practice safe sound.

• FOR USE WITH 12V NEGATIVE GROUND VEHICLE APPLICATIONS ONLY. Using this product other than in its

designed application may result in ﬁre, injury or product damage.

• MAKE THE CORRECT WIRING CONNECTIONS AND USE PROPER FUSE PROTECTION. Failure to connect wiring

correctly with appropriate gauge and fuse protection may result in ﬁre, injury or product damage . When replacing

fuse(s), never exceed the speciﬁed rating. Ensure proper protection of all system power wiring and install an

external fuse (not included) with speciﬁed rating for each ampliﬁer connected with the +12V lead at the battery

terminal.

• DISCONNECT THE NEGATIVE BATTERY TERMINAL BEFORE INSTALLATION. Failure to do so may result in ﬁre,

injury or damage to the unit.

• D O NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables to

prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as steering wheel,

brake pedals, etc. can be extremely hazardous.

• DO NOT DAMAGE VEHICLE SYSTEMS OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis

for installation, take precautions so as not to contact, puncture or obstruct brake lines, fuel lines, fuel tanks,

electrical wiring, etc. Failure to take such precautions may result in ﬁre or an accident.

• DO NOT UTILIZE OR CONNECT TO ANY PART OF VEHICLE SAFETY SYSTEMS. Bolts, nuts or wires used in the

brake, airbag, steering or any other safety-related systems or fuel tanks should NEVER be used for mounting,

power or ground connections. Using such parts may disable control of the vehicle or result in ﬁre.

WARNING This symbol means important instructions.

Failure to heed them can result in serious injury or death.

CAUTION

• STOP USE IMMEDIATELY IF A PROBLEM OCCURS. Failure to do so may result in personal injury or damage to the

product. Return it to your authorized Wāvtech dealer.

• HAVE AN EXPERT DO THE WIRING AND INSTALLATION. This unit requires special technical skill and experience

for wiring and installation. To insure safety and proper function, always contact the authorized dealer where you

purchased the product to have it done professionally.

• INSTALL THE UNIT SECURELY WITH SPECIFIED PARTS. Be sure to use only the included parts and speciﬁed

installation accessories (not included). Use of other than designated parts may damage this unit. Install the unit

securely so that it will not come loose during a collision or sudden jolt.

• ROUTE WIRING AWAY FROM SHARP EDGES AND MOVING PARTS. Arrange cables and wiring away from sharp

or pointed edges and avoid moving parts such as seat hinges or rails to prevent pinching or wear. Use loom

protection where appropriate and always use a grommet for any wiring routed through metal.

• NEVER RUN SYSTEM WIRING OUTSIDE OR UNDERNEATH THE VEHICLE. All wiring must be routed, secured

and protected inside the vehicle. Failure to do so may result in ﬁre, injury or property damage.

• INSTALL THE UNIT IN A DRY AND VENTILATED LOCATION. Avoid mounting locations where the unit will likely

be exposed to high moisture or heat without adequate ventilation. Moisture penetration or heat buildup may

result in product failure. Always make sure the ampliﬁer chassis temperature is safe before touching it.

• REDUCE GAIN AND SOURCE VOLUME TO MINIMUM LEVELS FOR INITIAL SYSTEM TUNING. Ensure ampliﬁer

power is oﬀ before connecting signal cables and follow proper system gain setting procedures. Failure to do so

may result in damage to the ampliﬁer and/or connected speakers.

Package Contents: Accessories Required for

Installation (not included):

WARNING

CAUTION

This symbol means important instructions.

Failure to heed them can result in injury or property damages.

Mounting Tabs

(pre-attached)

Spk Level

Input Terminals

Main Unit

Hex Wrenches

ŸRCA Cables or Signal Wire

ŸPower Supply & Speaker Wire

ŸIn-line Fuse Holder w/100A Fuse

ŸBattery Ring Terminal

ŸChassis Ground Terminal

ŸWire Crimp Connectors

ŸGrommets & Loom

Mounting Screws

Power Supply / Output Panel Connections & Settings

Auto Turn-On Detect Jumpers:

By default, the ampliﬁer is set to

detect both DC-oﬀset and audio

signals for turning itself on/oﬀ

automatically. These jumpers

allow either turn-on mode to be

defeated independently or to

bypass both modes when a

switched +12V trigger is available

and connected to the remote turn-on (REM) terminal.

Power/Protect Indicator: This LED will illuminate green when the ampliﬁer is powered on and

❷

operating normally. If a shutdown occurs due to a detected fault, the LED will turn red. Once the

fault has been corrected or the condition has cleared, the ampliﬁer will

automatically recover, indicated by the LED changing back to green.

Introduction

Welcome to Wāvtech, exceptional mobile audio products for audiophiles. Our products are engineered

from the ground up to provide a truly remarkable listening experience with superior performance,

sound quality and reliability. Built for the professional installer, our innovative features enable

maximum application coverage with ultimate system ﬂexibility. Whether retaining the factory receiver

or utilizing an aftermarket source, our solutions are simply the best available for unlimited sound

system upgrades.

Features:

• 5/4/3-Channel Bridgeable

• Diﬀerential Balanced Inputs

• Dual Input Range with Ideal Gain Structure

• Variable Gain Adjustments with Clip LEDs

• 6ch Input with up 3-way Summing Capability

• +/-6dB Output Level Trim for After Sum or Copy

• Variable -12dB/oct. HP/LP/BP Filters (Main Ch)

• bassFREQ Processor with Parametric EQ,

-24dB/oct. Subsonic and LP Filters (Sub Ch)

• Remote Level Control Ready (Sub Ch)

• Auto Turn-On via DC-Oﬀset and Audio Detect

• Stop-Start Vehicle Compatible

• OEM Load Detect System Compatible

• Active Rollback Thermal Management

• Panel Mount RCA Inputs with Bal/Unbal Select

• Locking Detachable Spk Level Input Terminals

• 4AWG Insert Power/Ground Terminals

• 12AWG Insert Speaker Output Terminals

• Compact Chassis w/Detachable Mounting Tabs

Input Panel Connections & Settings

Load Jumpers: Each speaker

level input channel has built-in

adaptive loading to satisfy most

OEM load detect systems. These

internal loading circuits can be

bypassed (OFF) for channels

where no loading is required,

such as when a speaker is still

directly connected to the source.

Speaker Level Inputs: For up to six channels of speaker level input connections to the source.

❷

When set to the 20V input range (default), audio signal from 1-20Vrms will produce up to full

power output from maximum to minimum gain. For factory ampliﬁers with more than 20Vrms

output signal or if volume range is not suﬃcient with gains set at minimum, select the 40V input

range, which will reduce the input sensitivity by half for signals up to 40Vrms.

RCA Inputs: For up to four channels of RCA line level input connections to the source. When set to

the 5V input range (default), audio signal from 0.2-5Vrms will produce up to full power output from

maximum to minimum gain. For sources with more than 5Vrms output signal or if volume range is

not suﬃcient with gains at minimum, select the 10V input range, which will reduce the input

sensitivity by half for signals up to 10Vrms. Use quality interconnects to ensure stable connection

and minimize the possibility for induced noise.

RCA Input Bal/Unbal Switches: These switches select the associated RCA input’s conﬁguration

❹

between balanced (default) and unbalanced. Unbalanced connects the RCA shield to ground

reference, which may be useful in eliminating noise under certain source or system conditions.

Remote Level Control Jack: This RJ45 jack is for connecting the optional linkRC to the main unit

❺

for remote adjustment of CH5/6 (Sub) output volume from 0dB (max) to -30dB (min).

CH6(R)CH5(L)

LOAD LOAD LOAD LOAD

CH5(L) CH6(R)CH2(R)CH1(L)

CH1(L) CH2(R)

RLC

CH4(R)CH3(L)

LOAD LOAD

CH3(L) CH4(R)

BAL UNBAL BAL UNBAL BAL UNBAL

Œ❷

❹

❺

DETECT

CH3(L) CH4(R)

BRIDGED

CH1(L) CH2(R)

SUB

GND REM +12V

PRO

❷

Ž❹

❺

Produkspesifikasjoner

Merke:	Wavtech
Kategori:	Mottaker
Modell:	Link1000.5plus

Trenger du hjelp?

Hvis du trenger hjelp med Wavtech Link1000.5plus still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Mottaker Wavtech Manualer

Wavtech Link1000.5plus Bruksanvisning

2 Januar 2025

Mottaker Manualer

Nyeste Mottaker Manualer

AudioControl EPIC2000 Bruksanvisning

5 Januar 2025

AudioControl EPIC1500 Bruksanvisning

5 Januar 2025

Artsound MATAMP-2240 Bruksanvisning

5 Januar 2025

AudioControl EPIC750 Bruksanvisning

5 Januar 2025

Kramer PT-102VN Bruksanvisning

4 Januar 2025

QSC CMX800V Bruksanvisning

4 Januar 2025

Deaf Bonce DB-6.50 DSP Bruksanvisning

4 Januar 2025

Deaf Bonce DB-8.50 DSP Bruksanvisning

4 Januar 2025

QSC SRA3622 Bruksanvisning

4 Januar 2025

Parasound A 52+ Bruksanvisning

4 Januar 2025