Yamaha VXS5-VA Bruksanvisning
Les nedenfor 📖 manual på norsk for Yamaha VXS5-VA (1 sider) i kategorien Høyttaler. Denne guiden var nyttig for 5 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/1
English
ZK28100
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of
serious injury or even death from electrical shock, short-circuiting,
damages, fire or other hazards. These precautions include, but are not
limited to, the following:
• This device contains no user-serviceable parts. Do not open the device or
attempt to disassemble the internal parts or modify them in any way. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
• Do not put burning items, such as candles, on the unit. A burning item may fall
over and cause a fire.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of
physical injury to you or others, or damage to the device or other property.
These precautions include, but are not limited to, the following:
• Do not place the device in an unstable position where it might accidentally fall
over.
• Do not place the device in a location where it may come into contact with
corrosive gases or salt air. Doing so may result in malfunction.
• Always consult qualified Yamaha service personnel if the device installation
requires construction work, and make sure to observe the following
precautions.
- Choose mounting hardware and an installation location that can support the
weight of the device.
- Avoid locations that are exposed to constant vibration.
- Use the required tools to install the device.
- Inspect the device periodically.
• Before connecting the device to other devices, turn off the power for all the
other devices. Before turning the power on or off for all devices, set all volume
levels to minimum.
• Use only speaker cables for connecting speakers to the speaker jacks. Use of
other types of cables may result in fire.
• Do not insert your fingers or hands in any gaps or openings on the device
(ports).
• Do not rest your weight on the device or place heavy objects on it.
• Do not operate the device if the sound is distorting. Prolonged use in this
condition could cause overheating and result in fire.
• Do not pull the cables connected.
• When choosing a power amplifier for use with this device, make sure that the
output power of the amplifier is lower than the power capacity of this device
(see “Specifications”).
Even if the output power of the amplifier is lower than the power capacity of
this device (program), use of excessive input signals resulting in clipping may
cause damage to the device.
Malfunction or fire may occur especially when the following sounds or noises
are generated:
- feedback, when using a microphone
- continuous and extreme volume sound from a musical instrument
- extreme continuous distorted sound
- noise caused by plugging/unplugging the cable while the amplifier is turned
on
Yamaha cannot be held responsible for damage caused by improper use or
modifications to the device.
PRECAUTIONS
Do not open
Fire warning
Location
Connections
Handling caution
NOTICE
To avoid the possibility of malfunction/damage to the product or damage to other
property, follow the notices below.
●Handling and maintenance
• Do not expose the device to excessive dust or vibration, or extreme cold or
heat (such as in direct sunlight, near a heater, or in a car during the day), in
order to prevent the possibility of panel disfiguration, unstable operation, or
damage to the internal components.
• Do not place vinyl, plastic or rubber objects on the device, since this might
discolor the panel.
• When cleaning the device, use a dry and soft cloth. Do not use paint thinners,
solvents, cleaning fluids, or chemical-impregnated wiping cloths.
• When turning on the AC power in your audio system, always turn on the
power amplifier LAST, to avoid speaker damage. When turning the power off,
the power amplifier should be turned off FIRST for the same reason.
• Be sure to observe the amplifier’s rated load impedance (see
“Specifications”), particularly when connecting speakers in parallel.
Connecting an impedance load outside the amplifier’s rated range can
damage the amplifier.
• When using a high-impedance speaker connection, make sure the audio
signal is passed through an 80 Hz or above high-pass filter before being input
to the speakers.
• When connecting the speakers with high impedance, be sure that the total
rated input capacity of the speakers does not exceed the output power of the
amplifier.
• Air blowing out of the bass reflex ports is normal, and often occurs when the
speaker is handling program material with heavy bass content.
• Place the speaker on a flat and smooth surface.
• Do not place the speaker on the ground with the grille faced down.
• Do not touch the speaker driver unit.
●Protective circuit
This speaker system has an internal protection circuit that shuts off the speaker
unit when an excessive input signal is applied. If the speaker unit emits no
sound, reduce the volume level of the amplifier immediately. The sound will
return automatically in several seconds.
●About this manual
• The illustrations as shown in this manual are for explanation only, and may
appear somewhat different from your device.
• The company names and product names in this manual are the trademarks or
registered trademarks of their respective companies.
Information for Users on Collection and Disposal of Old Equipment
This symbol on the products, packaging, and/or accompanying
documents means that used electrical and electronic products
should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please
take them to applicable collection points, in accordance with your
national legislation and the Directives 2002/96/EC.
By disposing of these products correctly, you will help to save
valuable resources and prevent any potential negative effects on
human health and the environment which could otherwise arise from inappropriate
waste handling.
For more information about collection and recycling of old products, please contact
your local municipality, your waste disposal service or the point of sale where you
purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer
or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these items,
please contact your local authorities or dealer and ask for the correct method of
disposal.
Supplied Items
Unpack the contents and confirm that all the following items are included.
* Screws/bolts to fasten the bracket base onto the wall/ceiling and speaker cables are not supplied.
Specifications
The specifications data was measured in an anechoic chamber, according to EN 54-24.
Reference axis: Axis is on the center of grille surface and perpendicular to the grille surface.
Reference plane: Plane is on the grille surface and perpendicular to the reference axis.
Horizontal plane: Plane is containing the reference axis and perpendicular to the reference plane.
*1: Full-space (4π)
*2: Calculated based on power rating and sensitivity, exclusive of power compression.
*3: When connecting with low impedance.
*4: IP34 when installing the speaker on the ceiling vertically.
*5: Excluding installation with the grille facing up. Do not install in such a way outside.
The contents of this manual apply to the latest specifications as of the printing date. Since Yamaha makes continuous improvements to the product, this manual
may not apply to the specifications of your particular product. To obtain the latest manual, access the Yamaha website then download the manual file. Since
specifications, equipment or separately sold accessories may not be the same in every locale, please check with your Yamaha dealer.
The dimensions are shown in “Technical Specifications”.
• Speaker × 2 • Bracket base × 2
• Mounting bracket × 2 • Bracket cover × 2
• Screw for attaching the mounting bracket × 4
(VXS8-VA/VXS8-VAW: M6 × 14, VXS5-VA/VXS5-VAW: M5 × 14)
• Stopper screw × 2
(M3 × 8, VXS8-VA/VXS8-VAW only)
• Screw for attaching the terminal cover (4 × 12) × 4 • Bolt with hexagon hole (M6 × 10) × 2
• Safety wire × 2 • Terminal cover × 2
• Safety pin × 2 • Hexagon wrench × 1
• Owner’s Manual (this manual) • Technical Specifications (English only)
Model VXS8-VA/VXS8-VAW VXS5-VA/VXS5-VAW
Type 2-way, bass-reflex
Component LF 8" (20 cm) cone driver 5 1/4" (13 cm) cone driver
HF 1" (2.5 cm) soft dome tweeter 3/4" (2 cm) soft dome tweeter
Coverage angle (–6 dB)*1Horizontal: 150° (500 Hz), 110° (1 kHz), 110° (2 kHz), 110°
(4 kHz)
Vertical: 130° (500 Hz), 105° (1 kHz), 35° (2 kHz),
85° (4 kHz)
Horizontal: 185° (500 Hz), 135° (1 kHz), 110° (2 kHz), 110°
(4 kHz)
Vertical: 280° (500 Hz), 115° (1 kHz), 100° (2 kHz),
100° (4 kHz)
Rated impedance 8 Ω (without transformer)
100 V line: 170 Ω (60 W), 330 Ω (30 W), 670 Ω (15 W)
70 V line: 80 Ω (60 W), 170 Ω (30 W), 330 Ω (15 W),
670 Ω (7.5 W)
8 Ω (without transformer)
100 V line: 330 Ω (30 W), 670 Ω (15 W), 1.3 kΩ (7.5 W)
70 V line: 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W),
1.3 kΩ (3.8 W)
Power rating NOISE 90 W 75 W
PGM 180 W 150 W
MAX 360 W 300 W
Sensitivity*189 dB (1 W, 1 m, 100 Hz to 10 kHz pink noise)
77 dB (1 W, 4 m, 100 Hz to 10 kHz pink noise)
88 dB (1 W, 1 m, 100 Hz to 10 kHz pink noise)
76 dB (1 W, 4 m, 100 Hz to 10 kHz pink noise)
Maximum SPL*2106 dB (60 W, 1 m, 100 Hz to 10 kHz pink noise at 60 W
tap)
94 dB (60 W, 4 m, 100 Hz to 10 kHz pink noise at 60 W tap)
115 dB (360 W, 1 m, 100 Hz to 10 kHz pink noise at 8 Ω)
103 dB (360 W, 4 m, 100 Hz to 10 kHz pink noise at 8 Ω)
102 dB (30 W, 1 m, 100 Hz to 10 kHz pink noise at 30 W
tap)
90 dB (30 W, 4 m, 100 Hz to 10 kHz pink noise at 30 W tap)
113 dB (300 W, 1 m, 100 Hz to 10 kHz pink noise at 8 Ω)
101 dB (300 W, 4 m, 100 Hz to 10 kHz pink noise at 8 Ω)
Frequency range (-10 dB)*1, *351 Hz – 20 kHz 62 Hz – 20 kHz
Crossover frequency 2.8 kHz 3 kHz
Connector Ceramic terminal block (3 pin) × 1 (input: +/–, Earth)
Applicable wire size AWG 26–12 (4.0 mm2)
Transformer taps 70 V 60 W, 30 W, 15 W, 7.5 W 30 W, 15 W, 7.5 W, 3.8 W
100 V 60 W, 30 W, 15 W 30 W, 15 W, 7.5 W
Overload protection Full-range power limiting to protect network and transducers
Magnetically shielded No
Dust and water resistant*4, *5IP35 (EN54-24 Enclosure protection rating. Type B : IP33C)
Enclosure Cabinet ABS (UL94-5VB)
Baffle ABS (UL94-5VB)
Grille Powder coated perforated aluminium (t=1.0 mm), aperture ratio: 51%
Outer color VXS8-VA/VXS5-VA Black (approximate value: Munsell N3)
VXS8-VAW/VXS5-VAW White (approximate value: Munsell 9.3)
Dimensions (speaker only)
(W × H × D in vertical cabinet orientation)
278 × 430 × 239 mm (11" × 16 15/16" × 9 7/16") 176 × 280 × 163 mm (6 15/16" × 11 1/16" × 6 7/16")
Net weight (speaker only, 1 piece) 8.2 kg (18.1 lbs) 3.6 kg (7.9 lbs)
Packaging Packaged in pair
Standards Certified to the European Standard EN 54-24: 2008 0359-CPR-00406 Certified year: 14
Loudspeaker for voice alarm systems for fire detection and fire alarm systems
Environment type: B
Certified to the European Standard EN60849:1998
Sound systems for emergency purposes
Certified to the International Standard ISO 7240-24: 2010
Sound-system loudspeaker for fire detection and fire alarm systems
In compliance with the British Standard BS-5839-8: 2008 14.8
Connecting the Multiple Speakers
When installing the multiple speakers, connect them in parallel way.
CAUTION
When connecting with low impedance, take note of the combined
resistance.
Note
When connecting with high impedance, refer to “Better Sound for
Commercial Installations” (English only) of the Yamaha Pro Audio
web site, at the following URL.
http://www.yamahaproaudio.com/global/en/training_support/
better_sound/
Installing the Speakers
Install the speakers on the wall/ceiling with the supplied brackets.
Ensure that the wall/ceiling is sufficiently strong.
Illustrations in this manual are for the VXS5-VA. The installation
method is the same for other models.
Pre-installation (Preparation of the cable)
Use stranded wire for cables attached to
the ceramic terminal. Strip their insulation
as shown in the figure and connect them.
Note
Do not plate stranded wires by solder. Doing so will cause the wire to
break.
An installed speaker is shown below. Install the bracket base and
attach the mounting bracket as shown.
Note
• When installing the speaker on the ceiling with the grille parallel to
the ground, install the speaker horizontally.
• When installing the speaker on the ceiling, be sure to install the
bracket base with its shaft facing horizontally, and not inclined to
the ground.
• Mounting bracket is made to not turn left or right when installing the
speaker on the ceiling.
• Refer to the “Technical Specifications” for the angle of installing
speakers.
• Installing with the grille facing up may cause water to enter the
speakers, causing malfunction.
Installing on the wall Installing on the ceiling
VerticalHorizontal
From amplifier or
previous speakers
To subsequent
speakers
To
subsequent
speakers
Speaker
Power
amplifier * You can use this terminal to hook up an earth cable, as
necessary.
About 7 mm (0.3")
20141007
1.1 Put the bracket base onto the wall/ceiling and mark the position for
the screws/bolts and cables. The diameter of the screw/bolt holes at
the four corners is M6, and speaker cables hole at the center is
ø11 mm.
1.2 Make holes through the wall/
ceiling for the bolts and cables,
as required, and feed the bolts
and cables from the amplifier
through the holes, as shown.
1.3 Install the bracket base onto
the wall/ceiling. Make sure to
fasten four corners of the
bracket base.
1.4 Pass cables through the gap at
the lower part of the bracket
cover, and put the bracket
cover on the bracket base.
Note
If you want to adjust the slack of
cables last, the bracket cover
can be attached after step 5.4.
Select the line voltage/impedance (100V/70V/8Ω) and power tap for
100V/70V line distributed system, by rotating the tap selector switch
on the rear side of the speaker with a flat-blade screwdriver.
CAUTION
• The “X” position should not be selected. The 8Ω position should be
selected for 8Ω audio systems only. If the setting is incorrect, it may
cause malfunction of the speaker and amplifier.
• Make sure the amplifier is switched off before operating the tap
selector switch.
3.1 Attach the mounting bracket and safety wire to the speaker. Use the
supplied screws to attach the mounting bracket.
The way to attach the mounting bracket depends on the orientation of
the speaker (vertical or horizontal).
* 8-inch model (VXS8-VA and VXS8-VAW) only.
1Installing the Bracket Base on the Wall/ceiling
2Set the Line Voltage/Impedance and Power
3Attach the Mounting Bracket and Safety Wire
Note
Mounting bracket can be attached in reverse direction.
Bracket cover
Bracket base
Illustration indicates the setting at 30 W for 100 V
line and 15 W for 70 V line.
Tap selector switch
Mounting bracket
Safety wire
Stopper screw (M3 × 8)*
Vertical installation
Angle
adjustment bolt
Angle adjustment
bolt
Horizontal installation
Stopper screw (M3 × 8)*
3.2 Set the desired vertical angle of the speaker.
Loosen the angle adjustment bolt with the supplied hexagon wrench,
adjust the angle of the speaker, and tighten the angle adjustment bolt
to secure the speaker (indication of torque: 8 N·m).
Note
• Guide marked on the mounting bracket is every 10°.
• (VXS8-VA/VXS8-VAW only) When installing the speaker on the
wall with a vertical angle of 30° or less, attach the supplied stopper
screw.
3.3 Secure the other end of the safety wire to a point close to where the
speaker will be installed.
CAUTION
• Make sure to take measures to prevent the speaker from falling
down in the event of an installation failure.
• When installing the safety wire on the wall, install it higher than the
wire’s attachment point on the speaker, with as little slack as
possible.
• If the safety wire is too short, prepare another wire appropriate for
the speaker weight and installation conditions. If the wire is too
long, should the speaker fall, the wire may snap as a result of too
much strain.
4.1 After loosening the terminal screws of the ceramic terminal with a
driver, insert the cables into each terminal and tighten the screws.
Pull on the cables to make sure they are tightly secured and will not
come loose.
Note
Use a flat-blade screwdriver with a blade less than 3 mm (0.1 in.).
4.2 Attach the terminal cover with the screws.
5.1 Install the mounting bracket on the bracket base.
4Connect the Wiring to the Connector
5Install the Speaker on the Bracket Base
* You can use this terminal to
hook up an earth cable, as
necessary.
+
–
Less than 3 mm (0.1 in.)
Terminal cover
Screw (4 ×12)
To the wall To the ceiling
5.2 Attach the safety pin.
Be sure to attach the safety pin to prevent the mounting bracket from
falling.
Note
The safety pin can be attached from either side of the mounting
bracket depending on the angle of the speaker.
5.3 (If installing the speaker on the wall) turn the speaker horizontally to
set the angle.
5.4 Make sure the mounting bracket is seated against the bracket base,
then tighten the supplied bolt (indication of torque: 6.5 N·m).
Note
• When installing the speaker on the ceiling in particular, make sure
the mounting bracket is seated against the bracket base.
• The bolt with hexagon hole can be attached from either side of the
mounting bracket (left or right) depending on the angle of the
speaker.
The installation is complete.
Safety pin
Bolt with hexagon hole
Yamaha Pro Audio global web site
http://www.yamahaproaudio.com/
Yamaha Manual Library
http://www.yamaha.co.jp/manual/
Owner’s Manual
Surface Mount Speaker
EN FR
La version française du Mode d'emploi se trouve au verso.
Produkspesifikasjoner
| Merke: | Yamaha |
| Kategori: | Høyttaler |
| Modell: | VXS5-VA |
Trenger du hjelp?
Hvis du trenger hjelp med Yamaha VXS5-VA still et spørsmål nedenfor, og andre brukere vil svare deg
Høyttaler Yamaha Manualer
25 Oktober 2024
21 Oktober 2024
21 Oktober 2024
21 Oktober 2024
21 Oktober 2024
21 Oktober 2024
21 Oktober 2024
21 Oktober 2024
21 Oktober 2024
21 Oktober 2024
Høyttaler Manualer
- Høyttaler Aiwa
- Høyttaler LG
- Høyttaler Vonyx
- Høyttaler IKEA
- Høyttaler Edifier
- Høyttaler Teufel
- Høyttaler Kogan
- Høyttaler Soundcore
- Høyttaler Turbosound
- Høyttaler Sony
- Høyttaler GoGEN
- Høyttaler Morel
- Høyttaler Axis
- Høyttaler Media-tech
- Høyttaler EarFun
- Høyttaler Audio-Technica
- Høyttaler Toa
- Høyttaler Pyle
- Høyttaler Sencor
- Høyttaler Bose
- Høyttaler JVC
- Høyttaler Kicker
- Høyttaler OSD Audio
- Høyttaler MB Quart
- Høyttaler CSL
- Høyttaler Bearware
- Høyttaler Maginon
- Høyttaler Sonance
- Høyttaler Artsound
- Høyttaler Ion
- Høyttaler Yorkville
- Høyttaler V-Tac
- Høyttaler JBL
- Høyttaler Infinity
- Høyttaler Majority
- Høyttaler Klipsch
- Høyttaler Karma
- Høyttaler Match
- Høyttaler Definitive Technology
- Høyttaler QSC
- Høyttaler WHD
- Høyttaler Q Acoustics
- Høyttaler Karcher
- Høyttaler Trevi
- Høyttaler Monitor Audio
- Høyttaler Canton
- Høyttaler Fresh N Rebel
- Høyttaler Energy Sistem
- Høyttaler MEE Audio
- Høyttaler Monacor
- Høyttaler Hercules
- Høyttaler Black Hydra
- Høyttaler Electro-Voice
- Høyttaler Wharfedale
- Høyttaler Boss
- Høyttaler Mount-It!
- Høyttaler Mad Dog
- Høyttaler Ashly
- Høyttaler Memphis Audio
- Høyttaler Focal
- Høyttaler Alpine
- Høyttaler Bazooka
- Høyttaler Lamax
- Høyttaler RCF
- Høyttaler Atlas
- Høyttaler PowerBass
- Høyttaler Prime3
- Høyttaler Harman Kardon
- Høyttaler Lexibook
- Høyttaler Ibiza Sound
- Høyttaler Aconatic
- Høyttaler Sonus Faber
- Høyttaler Xcellon
- Høyttaler OWI
- Høyttaler Titanwolf
- Høyttaler Weather X
- Høyttaler HK Audio
- Høyttaler Phoenix Gold
- Høyttaler Krüger And Matz
- Høyttaler Indiana Line
- Høyttaler Yamazen
- Høyttaler Blue Tees
- Høyttaler BASSBOSS
- Høyttaler Tangent
- Høyttaler FBT
- Høyttaler Transparent
- Høyttaler IHome
- Høyttaler Andover
Nyeste Høyttaler Manualer
28 Oktober 2024
28 Oktober 2024
28 Oktober 2024
28 Oktober 2024
28 Oktober 2024
28 Oktober 2024
28 Oktober 2024
28 Oktober 2024
28 Oktober 2024
28 Oktober 2024