AXESS AXDSPL-SP Bruksanvisning

Les nedenfor 📖 manual på norsk for AXESS AXDSPL-SP (1 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/1
AXDSPL-SP
INSTALLATION I NSTRUC T IONS
REV. 5/1/20
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
16-pin Header
AX-DSPL-SP
AX-DSPL-SP
The AXDSPL-SP will be used for adding a
Toslink digital output to the AXDSP-L.
1. Unplug the
Important! AXDSP-L from the vehicle.
2. Remove (4) Phillips screws securing the AXDSP-L interface, then
remove the top cover, exposing the circuit board within.
3. Locate the 16-pin header on the circuit board.
4. Carefully line up the header pins to the Toslink
Important!
interface, with the Toslink port facing outward. Gently press
down to secure.
Both interfaces may be damaged if installed wrong.Note:
5. Reinstall the top cover provided with the AXDSPL-SP to complete
the installation.

Produkspesifikasjoner

Merke: AXESS
Kategori: Ikke kategorisert
Modell: AXDSPL-SP

Trenger du hjelp?

Hvis du trenger hjelp med AXESS AXDSPL-SP still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert AXESS Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer