Baby Lock Gallant XL Stationary Bruksanvisning

Baby Lock Ikke kategorisert Gallant XL Stationary

Les nedenfor 📖 manual på norsk for Baby Lock Gallant XL Stationary (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/2

NEEDLE SIZE THREAD SIZE

12 and 14 monolament, 100 wt. silk, 60 wt. poly, mylar

16 monolament, hologram, 100 wt. silk, 60 wt. poly, 50 wt. poly, 50 wt. cotton, some 40 wt. threads

18 40 wt. cottons and poly, 30 wt. cottons and poly

20 Any thread 30 wt. and heavier such as 12 wt., 19 wt., 30 wt.

QUICK REFERENCE CARD

Download a complete Gallant XL Stationary user manual from

the BabyLock website: www.BabyLock.com/manuals

Use only the correct needle system as recommended by BabyLock. For the Gallant XL Stationary,

this is needle system 134. This needle system is designed to withstand high stitching speeds.

Choose among sizes 12 through 20 according to the type of thread you are using.

NEEDLE AND THREAD GUIDE

TO THREAD THE GALLANT XL STATIONARY

1. Place thread cone onto spool post 1, insert the thread through the thread-mast eyelet 2 from right to left,

continuing to the 3-hole thread guide 3.

2. Thread all three holes from back to front 4, wrapping as you go, and being careful not to cross threads.

NOTE: This is recommended for most threads. Very delicate threads, e.g. metallic threads or monolament,

may require less tension. If you have problems with thread breaking, try threading only one or two holes 4.

3. The thread continues down through thread guide 5 and then to the tension assembly 6.

IMPORTANT: The thread must be ossed up between two tension discs. If not ossed all the way up, the

thread will lay on top of the tension discs (no tension) and thread looping on the bottom of the quilt can occur.

4. After the thread is in the tension disks, be sure that the thread catches on the take-up spring and then pull it

down under the stirrup thread guide 7.

5. Bring the thread up and through the take-up lever from back to front 8, and then through the lower thread

guide 9. Almost there! Thread through the needle bar thread guide hole, this time from front to back 10 .

6. Make sure the thread follows the groove down the front of the needle 11 and insert thread through the

eye of the needle from front to back. While pulling thread through the eye of the needle be careful that the

thread does not twist around the needle.

GALLANT XL STATIONARY SCREEN ICONS AND NAVIGATION

Home Screens: Where you’ll be when sewing! (See Stitching Modes section for more information.)

For more information about tools and settings, see the

Machine Tools

and

Information Screen

sections of the Gallant XL Stationary manual.

QM11070-BL • August 2024

MACHINE TOOLS ICONS

Access from the Home screen by clicking this icon.

Manual Stitching Mode

: Select the Manual icon and then

specify the stitches per minute (speed).

When using manual stitching mode, the length of the stitch

is determined by how quickly or slowly you move the quilt, in

combination with the number of stitches per minute (up to 2100)

that you choose.

For a consistent stitch length, move the quilt at a consistent speed.

Experiment with dierent combinations of quilting speed and

stitches per minute to nd what optimally works for you.

Precision Stitch Regulation

: Select the Precision icon and

then specify the stitches per inch. Ideal for ruler work.

Stitch regulation maintains a consistent stitch length (stitches

per inch), regardless of how quickly or slowly you move the quilt.

When quilting in Precision mode, the needle only moves when you

move the quilt. After you press the play key on the display or press

the foot pedal, move the quilt to begin quilting according to the

stitches-per-inch setting. When you pause moving the quilt, the

needle will pause until you move it again. Press the pause key on

the display or release the foot pedal to fully stop quilting.

Cruise Stitch Regulation

: Select the Cruise icon and then

specify the cruise speed (stitches-per-minute) setting.

When quilting in Cruise mode, the needle will start to move

immediately when you press the play key on the display or the foot

pedal, according to the cruise speed (stitches-per-minute) setting.

Once you begin to move the quilt, the needle will move according

to the stitches-per-inch setting.

The needle continues to move at the Cruise speed (stitches per

minute) anytime you stop moving the quilt, until you press the

pause button on the display or release the foot pedal.

Needle-stop position:

Select the arrow for the

desired end needle position for when you stop

stitching. The blue arrow is the selected stop

position. Push the blue arrow once and it does

a half stitch. Push and hold the blue arrow and

it does a walking stitch until released.

Lights:

Select this icon to adjust the brightness

of lights. Press to return to the menu.

Overspeed Alarm: Select to toggle the alarm

on or o. The alarm lets you know if you are

quilting too fast for stitch regulation. Press

to return to the menu.

Stitch Count: Select this to view your project

stitch count and your machine’s lifetime stitch

count. Press the Project count button to reset

the count to zero when starting a new quilt.

Press to return to the menu.

Diagnostics

: Contact your locally authorized

Baby Lock Retailer for assistance when running

diagnostics. Press to return to the menu.

Updates:

Display and machine updates can be

found on https://babylock.com/software-

support-and-downloads. Press to return

to the menu.

System Information: Show machine and

display hardware and rmware versions.

Press to return to the menu.

Return Home: Returns you to your most recent

home screen. Press to return to the menu.

STITCHING MODES

Select from the Menu screen.

Precision Cruise

Manual

The needle cycles continuously, but it

changes speeds to maintain the stitch

length when the quilt is moved.

The needle cycles continuously at

the same speed, regardless of the

movement of the quilt.

The needle cycles according to the

movements of the quilt to maintain the

stitch length.

Note: FP (Foot Pedal) and OSR (Optical Stitch Regulation) show orange only when the FP cable and OSR cable are connected.

Produkspesifikasjoner

Merke:	Baby Lock
Kategori:	Ikke kategorisert
Modell:	Gallant XL Stationary

Trenger du hjelp?

Hvis du trenger hjelp med Baby Lock Gallant XL Stationary still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Ikke kategorisert Baby Lock Manualer

Baby Lock Gallant Longarm Bruksanvisning

11 Desember 2024

Baby Lock Regalia Longarm Bruksanvisning

11 Desember 2024

Baby Lock Gallant XL Stationary Bruksanvisning

11 Desember 2024

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer

Hager TYA610A Bruksanvisning

11 Desember 2024

Hager RED112X Bruksanvisning

11 Desember 2024

Hager 80161869 Bruksanvisning

11 Desember 2024

Hager 80162865 Bruksanvisning

11 Desember 2024

Hager 80161865 Bruksanvisning

11 Desember 2024

Hager 80162869 Bruksanvisning

11 Desember 2024

Hager TN204S Bruksanvisning

11 Desember 2024

Extron VoiceLift Pro VLC 302 Bruksanvisning

11 Desember 2024

Extron DTP2 T 212 Bruksanvisning

11 Desember 2024

Extron AAP 100 Bruksanvisning

11 Desember 2024