Blackburn Dayblazer 400 Bruksanvisning

Blackburn Ikke kategorisert Dayblazer 400

Les nedenfor 📖 manual på norsk for Blackburn Dayblazer 400 (1 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/1

DAYBLAZER 400™

USB Rechargeable Light

Rechargeable Via C ble USBâ

Aufladbare USB Leuchte

Part# 7097038

Visit us at blackburndesign.com for product updates.

Visitez le site Internet blackburndesign.com pour obtenir les mises à jour sur les produits.

Informationen über Produktverbesserungen finden Sie unter www.blackburndesign.com

WARNING: POTENTIAL CHOKING HAZARD TO CHILDREN. THIS LIGHT IS EXTREMELY BRIGHT – DO NOT AIM DIRECTLY INTO EYES. UK ONLY:

WHEN USED FOR CYCLING, THIS LIGHT SHOULD BE USED IN CONJUNCTION WITH BRITISH STANDARD 6102/3 CYCLE LIGHT.

AVERTISSEMENT : DANGER POSSIBLE D’ÉTOUFFEMENT POUR LES ENFANTS. CET ÉCLAIRAGE EST EXTRÊMEMENT BRILLANT – NE PAS

DIRIGER LE FAISCEAU DIRECTEMENT DANS LES YEUX.

WARNUNG: POTENZIELLE ERSTICKUNGSGEFAHR FÜR KINDER. DIESES LICHT IST EXTREM HELL. NICHT DIREKT IN DIE AUGEN RICHTEN!

Plug into Micro USB port

Plug into computer USB port

Brancher sur le port USB

Brancher sur le port USB de l’ordinateur

Push to turn on/Cycle Modes

Hold down to turn off

Appuyer pour allumer/cycler

dans les différents Modes

Maintenir enfoncé pour éteindre

The light indicator will blink when charging. When charging is

complete the light indicator with flash green.

GREEN = 100% to 75% Battery Capacity

ORANGE = 75% to 25% Battery Capacity

RED = <25% Battery Capacity

When battery capacity is 25-35 minutes or less, red indicator light will

remain on constant until light reaches 0% or turns off in the selected mode.

MAKE SURE TO FULLY CHARGE LIGHT BEFORE FIRST USE

L’indicateur lumineux clignote pendant la charge. Quand la charge est

complète, l’indicateur lumineux clignote en vert.

ERT = Capacité des piles de 100 % à 75 %

ORANGE = Capacité des piles de 75 % à 25 %

ROUGE = Capacité des piles < 25 %

Quand l’éclairage ne peut durer que 25 à 35 minutes ou moins, l’indicateur

lumineux rouge reste constamment allumé jusqu’à ce que la capacité

atteigne 0 % ou que la lampe s’éteigne dans le mode choisi.

VÉRIFIER QUE L’ÉCLAIRAGE EST TOTALEMENT CHARGÉ AVANT LE PREMIER USAGE

Beim Laden blinkt die Anzeige. Grünes Licht zeigt an, dass der

Ladevorgang abgeschlossen ist.

RÜN = 100% bis 75% Batteriekapazität

ORANGE = 75% bis 25% Batteriekapazität

ROT = <25% Batteriekapazität

Beträgt die Batteriekapazität 25-35 Minuten oder weniger, bleibt das rote

Licht ständig an, bis die Leuchte 0% erreicht oder sich im gewählten Modus abschaltet.

SICHERSTELLEN, DASS DIE LEUCHTE VOR DEM ERSTEN GEBRAUCH VOLLSTÄNDIG GELADEN IST

1. Push button to power on.

2. Click to cycle modes.

3. Hold down 1 second to power off.

Light powers back on in the last mode used.

1. Appuyez sur le bouton pour allumer.

2. Cliquez pour faire défiler les modes.

3. Maintenez le bouton enfoncé pendant 1 seconde pour éteindre.

La lampe se rallumera dans le dernier mode utilisé.

1. Druckknopf EIN.

2. Klicken, um Modi auszuführen.

3. Halten Sie 1 Sekunde AUS.

Includes: 1 LiPo Battery, 1 USB Cable, 1 Manual

Contenu : 1 pile Li-Po, 1 Câble USB, 1 Manuel

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the

separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician

for help. Shielded interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. Specications and designs are subject to

change without any notice or obligation on the part of the manufacturer.