Bogen BC1 Bruksanvisning

Les nedenfor 📖 manual på norsk for Bogen BC1 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
BC1 Beam Clamp
2
4
3
5
6
The beam clamp mounting system is designed to provide an easy
and secure way of mounting horn speakers to I-beams.
A) For easier installation, detach the horn base (flange) from the horn
(refer to the speaker’s instruction manual for directions on detaching
the base).
B) Bolt the base [3] to the beam clamp [5] using the supplied bolt [1]
and lock washer [2].
Two bolt lengths are provided. Use the longer bolt for mounting
the cast bases of Bogen’s 15W and 30W horns. Use the shorter
bolt for the stamped bases of the 5W and 7W horns.
A flange hole [4] is provided in the base of later model Bogen
horn speakers. For earlier model horns without this hole or
non-Bogen horns, drill a /8” hole in the base.3
NOTE: It is important to use the correct length bolt or else
the clamp or base will not seat properly.
C) Fasten the beam clamp assembly to the web of an I-beam and tighten
the clamp bolt [6] well to secure the horn’s mounting base in place.
D) Place the horn speaker onto its base and finish the electrical
installation and positioning.
Specifications subject to change without notice.
© 1999 Bogen Communications Inc. All rights reserved.
54-9218-01D 0902
www.bogen.com

Produkspesifikasjoner

Merke: Bogen
Kategori: Ikke kategorisert
Modell: BC1

Trenger du hjelp?

Hvis du trenger hjelp med Bogen BC1 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Bogen Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer