Bogen SCU250 Bruksanvisning

Bogen Mikrofon SCU250

Les nedenfor 📖 manual på norsk for Bogen SCU250 (2 sider) i kategorien Mikrofon. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/2

Model SCU250

Professional Boundary

Microphone

DESCRIPTION

The SCU250 is an unobtrusive, uni-directional, surface-mount microphone

ideal for meeting rooms, conferences, and stage productions where minimum

visibility is ideal. The SCU250 provides full, rich reproduction of voice and

music and is well-suited in capturing the sound source and the immediate sur-

roundings. It has a low sensitivity to stage vibration and thumping noise and

has excellent user sound isolation feedback rejection.The SCU250 has a low-

impedance balanced output.The SCU250 features a heavy copper case with a

non-glare matte black finish, mounting keyways on bottom for hanging or for

attachment to the mounting surface, and a cardioid pickup pattern.The micro-

phone requires an external 9V - 52V DC phantom power supply and is ter-

minated by a standard male XLR with a built-in pre-amplifier.

SPECIFICATIONS

MIC Type: Boundary

Element: Back Electret condenser

Polar Pattern: Uni-directional

Impedance: 250-ohm

Frequency Response: 20 Hz to 8 kHz1

Sensitivity*: -58 dB +/- 3 dB

Max SPL @ 30 dB1% THD: >1

S/N Ratio: >65 dB

Cable: 26 ft.

Dimensions: 23

/4" W x 3/4" H x 31

/4" D

Product Weight: 1lb.

Material: Zinc die cast

Finish: Matte black finish

* (0dB= ,000 Hz indicated by open circuit)1 1V/microbar

-50

-60

-70

-80

-90

-100

20 1KHz200 2 20K K

Frequency Response, Magn dB re 1 V/microbar

= 0o

on axis

= 180o o axis

-40

0˚

180˚

330˚ 30˚

60˚300˚

90˚270˚

240˚

210˚

120˚

150˚

FREQUENCY RESPONSE GRAPH POLAR GRAPH

LOOSEN SCREWS 1, 2 & 3

INSERT THE WIRES

TIGHTEN SCREWS 1, 2 & 3

RED

YELLOW

SHIELD

(INSTALLATION TUBE)

Figure 2.

Figure 4.

Figure 3.

Note: There are two red, yellow,

and shield wires.

INSTALLATION

Rather than drill a hole large enough to fit the male XLR, the SCU250 cable

can be disconnected from the XLR and then reconnected, thereby permitting

an installer to drill a hole only large enough for the cable to fit through.

1. Release the shell by unscrewing the shell screw. See Figure 1.

2. Pull shell up cable.

3. Disconnect the cable by loosening the three terminal strip screws.

See Figure 2.

4. Remove shell and strain relief from cable.

5. Drill a /8" hole or greater and feed cable through hole.1

6. Slide shell and then strain relief back on cable.

7. Reconnect cable to terminal strip following the illustrations in

Figures 3 and 4.

8. Slide shell over electronics assembly and replace and tighten the shell

screw.

SHELL SCREW

SHELL

STRAIN RELIEF

Figure 1.

Printed in Philippines. 0308

54-2048-0 B1

Specifications subject to change without notice.

LIMITED WARRANTY

Bogen microphones are warranted to be free from defects in material or workmanship provid-

ed that the product has not been subjected to abuse or accident or altered in any way for one

(1) year from the date of sale to the original purchaser.Any part of the product covered by this

warranty that, with normal installation and use, becomes defective will be repaired or replaced

by Bogen, at our option, provided the product is shipped insured and prepaid to: Bogen Factory

Service Department, 50 Spring Street, Ramsey, 07446, USA.The product will be returned toNJ

you freight prepaid.This warranty does not extend to any of our products that have been sub-

jected to misuse, improper storage, neglect, accident, improper installation or have been modi-

fied or repaired in any manner that Bogen believes may affect the reliability of the product, or

where the serial number or date code has been removed or defaced.

THE FOREGOING LIMITED WARRANTY IS BOGEN'S SOLE AND EXCLUSIVE WARRANTY

AND THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER

WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WAR-

RANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY

DISCLAIMED AND EXCLUDED. Bogen's liability arising out of the manufacture, sale or supply-

ing of products or their use or disposition, whether based upon warranty, contract, tort or oth-

erwise, shall be limited to the price of the product. In no event shall Bogen be liable for special,

incidental or consequential damages (including, but not limited to, loss of profits, loss of data or

loss of use damages) arising out of the manufacture, sale or supplying of products, even if Bogen

has been advised of the possibility of such damages or losses.

Products that are out of warranty will also be repaired by the Bogen Factory Service Department

-- same address as above or call 20 -934-8500. The parts and labor involved in these repairs are1

warranted for 90 days when repaired by the Bogen Factory Service Department. All shipping

charges in addition to parts and labor charges will be at the owner's expense.

www.bogen.com

Produkspesifikasjoner

Merke:	Bogen
Kategori:	Mikrofon
Modell:	SCU250

Trenger du hjelp?

Hvis du trenger hjelp med Bogen SCU250 still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Mikrofon Bogen Manualer

Bogen GCU250 Bruksanvisning

1 Mars 2025

Bogen MGN19A Bruksanvisning

1 Mars 2025

Bogen GDU150 Bruksanvisning

1 Mars 2025

Bogen SCU250 Bruksanvisning

28 Februar 2025

Mikrofon Manualer

Nyeste Mikrofon Manualer

Kenwood KMC-66 Bruksanvisning

19 Mars 2025

Kenwood KMC-70 Bruksanvisning

19 Mars 2025

Kenwood KMC-32 Bruksanvisning

19 Mars 2025

Comica Vimo C2 Bruksanvisning

12 Mars 2025

Louroe Electronics Verifact B Bruksanvisning

11 Mars 2025

Louroe Electronics Verifact C Bruksanvisning

11 Mars 2025

Louroe Electronics Verifact K Bruksanvisning

11 Mars 2025

Louroe Electronics C-ML Bruksanvisning

11 Mars 2025

Louroe Electronics Verifact L-DT Bruksanvisning

11 Mars 2025

Louroe Electronics DV-ML Bruksanvisning

11 Mars 2025