Cameo Phantom H2 Bruksanvisning
Cameo
Effekt maskin
Phantom H2
Les nedenfor 📖 manual på norsk for Cameo Phantom H2 (52 sider) i kategorien Effekt maskin. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/52
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D´UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D´USO
PHANTOM H2
COMPACT HAZER
CLPHANTOMH2
CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
SAFETY INFORMATION 3
INTRODUCTION 5
CONNECTIONS, CONTROL, AND DISPLAY ELEMENTS 5
OPERATION 7
OPERATION BY CABLE REMOTE 8
SETUP AND INSTALLATION 9
TECHNICAL SPECIFICATIONS 9
MANUFACTURER’S DECLARATIONS 10
DMX CONTROL 51
DEUTSCH
SICHERHEITSHINWEISE 11
EINFÜHRUNG 13
ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 13
BEDIENUNG 15
BEDIENUNG PER KABELFERNBEDIENUNG 16
AUFSTELLUNG UND MONTAGE 17
TECHNISCHE DATEN 17
HERSTELLERERKLÄRUNGEN 18
DMX STEUERUNG 51
FRANCAIS
CONSIGNES DE SÉCURITÉ 19
INTRODUCTION 21
RACCORDEMENTS, ÉLÉMENTS DE COMMANDE ET
D’AFFICHAGE 21
MODE D’EMPLOI 23
COMMANDE PAR TÉLÉCOMMANDE FILAIRE 24
INSTALLATION ET MONTAGE 25
CARACTÉRISTIQUES TECHNIQUES 25
DÉCLARATIONS DU FABRICANT 26
PILOTAGE EN MODE DMX 51
ESPAÑOL
INSTRUCCIONES DE SEGURIDAD 27
INTRODUCCIÓN 29
CONEXIONES, ELEMENTOS DE MANEJO Y ELEMENTOS
DE VISUALIZACIÓN 29
FUNCIONAMIENTO 31
MANEJO POR MANDO A DISTANCIA CON CABLE 32
INSTALACIÓN Y MONTAJE 33
DATOS TÉCNICOS 33
DECLARACIONES DEL FABRICANTE 34
CONTROL DMX 51
POLSKI
ZASADY BEZPIECZEŃSTWA 35
WPROWADZENIE 37
PRZYŁĄCZA, ELEMENTY OBSŁUGI I WSKAŹNIKI 37
OBSŁUGA 39
OBSŁUGA ZA POMOCĄ PILOTA PRZEWODOWEGO 40
USTAWIANIE I MONTAŻ 41
DANE TECHNICZNE 41
OŚWIADCZENIA PRODUCENTA 42
STEROWANIE DMX 51
ITALIANO
INDICAZIONI SULLA SICUREZZA 43
INTRODUZIONE 45
CONNESSIONI, ELEMENTI DI COMANDO E
DI VISUALIZZAZIONE 45
UTILIZZO 47
UTILIZZO CON TELECOMANDO VIA CAVO 48
INSTALLAZIONE E MONTAGGIO 49
DATI TECNICI 49
DICHIARAZIONI DEL PRODUTTORE 50
CONTROLLO DMX 51
3
DMX DEUTSCHFRANCAISESPAÑOL ENGLISHITALIANO POLSKI
ENGLISH
YOU HAVE MADE THE RIGHT CHOICE!
This device was developed and produced under the highest standards of quality in order to ensure smooth operation for many years. Please
read these operating instructions carefully so that you can use your new Cameo Light product quickly and optimally. You can find more
information on Cameo Light on our website WWW. .COM.CAMEOLIGHT
SAFETY INFORMATION
1. Please read through these instructions carefully.
2. Store all information and instructions in a secure location.
3. Follow the instructions.
4. Heed all warnings. Do not remove any safety warnings or other information from the device.
5. Use the device only in the intended manner.
6. Use only stable and suitable stands and/or mounts (for fixed installations). Make sure that wall mounts are properly installed and secured.
Make sure that the device is securely installed and will not fall.
7. During installation, heed all safety provisions that apply in your country.
8. Do not install and operate the device in the vicinity of heaters, heat reservoirs, ovens, or other heat sources. Make sure that the device is
installed in such a way that it is sufficiently cooled and will not overheat.
9. Do not place any ignition sources, e.g. candles, on the device.
10. Do not block the ventilation slits.
11. The device was designed to be used only in interior spaces, do not operate the device in the direct vicinity of water (this does not apply
to specialty outdoor devices - in this case, please note the special instructions given in the following). Do not bring the device into contact
with combustible materials, fluids, or gases.
12. Make sure that no water can drop or splash into the device. Do not place any containers filled with fluids, such as vases or drinking
vessels, onto the device.
13. Ensure that no objects can fall into the device.
14. Operative the device using only those accessories recommended and specified by the manufacturer.
15. Do not open the device, and do not modify it.
16. After connecting the device, inspect all cable paths in order to avoid damage or accidents, such as those caused by tripping over said cables.
17. During transport, ensure that the device will not fall and potentially cause material damage and personal harm.
18. If your device no longer functions properly, fluids or objects have made their way into the device interior, or the device is otherwise
damaged, switch it off immediately and remove it from the power outlet (provided the device is active).
This device is to be repaired only by authorized specialists.
19. Use a dry towel to clean the device.
20. Follow all laws on disposal applicable in your country. Please separate plastic and paper or cardboard when disposing of the packaging.
21. Plastic bags must be kept out of reach of children.
FOR DEVICES CONNECTED TO A POWER SUPPLY:
22. ATTENTION: If the device power cable is equipped with a ground pin, it must be inserted into an outlet with a grounding conductor. Never
disable the grounding conductor of a power cable.
23. Do not immediately switch on the device when it has been exposed to stark temperature deviations (for example after transport).
Humidity and condensation could damage the device. Switch on the device only when it has reached room temperature.
24. Before you connect the device to the outlet, first ensure that voltage and frequency of the power supply complies with the values given
on the device. If the device has a voltage selector switch, connect the device to the outlet only if the device values comply with the values of
the power supply. If the provided power cable or power adapter does not fit your power outlet, contact an electrician.
25. Do not step on the power cable. Make sure that live cables, in particular those at the power socket or at the power adapter and the
device socket, are not bent.
26. With regard to the device cables, always make sure that the power cable or power adapter is always freely accessible. Always separate
the device from the power supply when the device is not in use or when you would like to clean the device. Always unplug the power cable
and power adapter from the power outlet using the plug or adapter, not the cord. Never touch the power cable and power adapter with wet hands.
27. If possible, do not switch the device on and off quickly because this may impair the service life of the device.
28. IMPORTANT INFO: Replace fuses only with fuses of the same type and value. If a fuse trips repeatedly, please contact an authorized
service center.
29. In order to completely separate the device from the power supply, remove the power cable or power adapter from the outlet.
30. If your device is equipped with a Volex power cord, release the correct Volex device connector before removing the cord. However, this
also means that the device may slide and fall when removing the power cord, which may cause personal harm and/or material damage.
Therefore, always lay cables carefully.
31. Remove the power cable and power adapter from the outlet when there is a risk of lighting or when you no longer want to use the device.
32. The device may only be installed when it carries no voltage (separate the power plug from the power supply).
33. Dust and other debris within the device may damage it. The device should be serviced or cleaned regularly by qualified specialists
depending on the environmental conditions (dust, nicotine, smoke, etc.) in order to avoid overheating.
34. The distance to combustible materials must be at least 0.5 m.
35. Power cables for powering multiple devices must have a core cross-section of at least 1.5 mm². In the EU, lines must be H05VV-F or
similar. Adam Hall provides suitable cables. Using these cables, you can connect multiple devices via the Power Out connection with the
Power In connection of another device. Ensure that the total power consumption of all connected devices does not exceed the specified
value (printed on the device). Be sure to keep power lines as short as possible.
Produkspesifikasjoner
| Merke: | Cameo |
| Kategori: | Effekt maskin |
| Modell: | Phantom H2 |
Trenger du hjelp?
Hvis du trenger hjelp med Cameo Phantom H2 still et spørsmål nedenfor, og andre brukere vil svare deg
Effekt maskin Cameo Manualer
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Effekt maskin Manualer
- Effekt maskin Behringer
- Effekt maskin Magmatic
- Effekt maskin Rosco
- Effekt maskin American DJ
- Effekt maskin DJPower
- Effekt maskin Showven
- Effekt maskin Eliminator Lighting
- Effekt maskin ColorKey
- Effekt maskin Lab Gruppen
Nyeste Effekt maskin Manualer
26 Oktober 2024
19 Oktober 2024
19 Oktober 2024
19 Oktober 2024
19 Oktober 2024
19 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024