Casablanca 99019 Bruksanvisning

Les nedenfor 📖 manual på norsk for Casablanca 99019 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
www.CasablancaFanCo.com 1.888.227.2178
M6009-01 • 06/26/12 • © Casablanca Fan Company
Model #99019
Universal
Remote Control
Transmitter &
Receiver
Installation
Wiring
OR OR OR
OFF
Remove the canopy. If uncertain
how to remove it, reference the fans
owners manual. With wiring exposed,
it may be helpful to note existing wire
connections or take a digital photo for
reference. Remove the wire connectors
that were connecting the wires from
the outlet box to the fan, leaving the
grounding wires connected.
CONNECT WIRES FROM RECEIVER TO FAN -Using the blue wire connectors connect the white wire from the
receiver (marked “common out”) to the white wire from fan. Connect the black wire from the receiver (marked
“fan out”) to the black wire from the fan. Connect the blue wire from the receiver (marked ”light out”) to the
blue wire (or possibly black with white stripe) from the fan.
Note: The red wire from the receiver has a pre-installed wire terminator. It is for fans with an optional up light;
otherwise it will not be used. Maximum 120 watts.
If you’re uncertain about wire colors or connections, please contact a qualied electrician.
CONNECT WIRES FROM RECEIVER TO WIRES FROM OUTLET BOX - Using an orange wire connector connect
the black wire (ungrounded) from the ceiling to the black wire from the receiver (marked “live in”). Connect
the white wire (grounded) from the ceiling to the white wire from the receiver (markedneutral in”).
AFTER ALL WIRES ARE CONNECTED and secured with wire connectors, re-install the canopy.
Before installing the Universal Remote
Control Receiver, use the pull chains to
set the fan speed to HIGH and the light
to ON. Be sure power is OFF before
proceeding with installation.
Choose the hanging system that most closely resembles the one used by your fan and install the receiver and wire as directed.
Note: Some fans may have considerable excess lead wire. For easier canopy installation, cut the excess wire, leaving a minimum of 8” remaining. Re-strip the fan lead wires 1/2”. Place remaining excess
wire into the ceiling electrical box. The bracket and fan must remain properly grounded.
This Remote Control Transmitter and Receiver is not compatible with Casablanca Hang Tru® Canopy Systems.
You may have installation issues if the fan is installed on an angled ceiling.
Ceiling
Plate
Receive
r
Canopy
Receiver
Canopy
Ceiling
Bracket
Receiver Fan Body
Cable Tie
For low prole fans, the receiver should
be secured to the hanger bracket with
a cable tie.
Receiver
Canopy
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
To avoid possible electrical shock, before installing or servicing your fan, disconnect the
power by turning off the circuit breakers to the outlet box and associated wall switch
location. If you cannot lock the circuit breakers in the off position, securely fasten a
prominent warning device, such as a tag, to the service panel.
F
R
O
M
R
E
C
E
I
V
E
R
F
R
O
M
C
E
I
L
I
N
G
black (ungrounded)
white (grounded) white (neutral in)
black (live in)
F
R
O
M
R
E
C
E
I
V
E
R
white
black
blue
white (common out)
black (fan out)
blue (light out)
F
R
O
M
F
A
N
www.CasablancaFanCo.com 1.888.227.2178
M6009-01 • 06/26/12 • © Casablanca Fan Company
TroubleshootingSafe-Exit
AUTHORIZED SERVICE CENTERS
For the most updated listing of Casablanca Authorized Service Centers,
visit www.CasablancaFanCo.com or call toll free 1-888-227-2178.
ONE YEAR WARRANTY
This product is warranted to the original purchaser by Casablanca Fan
Company against defects in material and workmanship for one (1) year
from date of purchase. During the warranty period, we will repair or, at
our option, replace a defective product at no charge. For information
on how to obtain service, contact Casablancas Service Department by
calling our toll-free number at 888-227-2178. Damage to the product
caused by mishandling, improper installation or modication is not
covered by this warranty. This warranty is given in lieu of all other
warranties expressed or implied. Some states do not allow limitations
of time on an implied warranty, therefore the above limitations may not
apply in every case. This warranty states specic legal rights which may
vary from state to state.
If you have problems installing or operating your fan, do not return this
product to the dealer. Call our Consumer Affairs Hotline.
888-227-2178
Monday through Friday
8 am to 4:30 pm Central
This device complies with RSS-210 of Industry Canada. Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
1. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
2. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures: Reorient or relocate the receiving antenna, Increase the
separation between the equipment and receiver, Connect the equipment
into an outlet on a circuit different from that to which the receiver is
connected. Consult the dealer or an experienced radio/TV technician for
help. Note: Any changes or modications to the transmitter or receiver
not expressly approved by Casablanca Fan Company may void ones
authority to operate this remote control.
Read and Save These Instructions
This product conforms to UL Standard 507.
WARNINGS
Fan will not start
Make sure the power is on at the
circuit breaker and the wall switch.
• Make sure the battery is working.
• Make sure that the transmitter
and receiver are paired.
• Check wire connections inside of
the canopy.
Transmitter only works when
held at close range
• Change battery.
Lights do not dim
• Make sure that you do not have
a CFL bulb installed. The control
has a feature that automatically
detects CFL bulbs and turns off
dimming if a CFL bulb is installed.
Remote control of fan is erratic
Make sure batteries are installed
correctly.
• Install a fresh battery.
Buttons one (1) through (4) turn on the
fan and control the speed.
• (1) Extra Low
• (2) Low
• (3) Medium
• (4) High
Pairing
Within 3 minutes of restoring power
to the fan, press both the power button
and the 4 button for at least 3 seconds.
The fan will turn at the lowest speed
signifying that the remote pairing
process is complete. If using the
transmitter with multiple fans, repeat
this process for each fan.
Note: The remote must be paired
before the fan will operate.
Fan
Power
4
The up arrow and down arrow buttons
control the lights on the fan. Quickly
press the up or down arrow to turn the
lights off and on. Hold the up or down
arrow to raise and dim the light level.
Up
Arrow
Down
Arrow
The power button found on the right
side of the transmitter turns the fan off.
The LED light will illuminate when a
button is pushed, letting you know that
the signal has been sent to the fan.
Fan
Power
Light
Operations Maintenance
Your Universal Remote comes with a
wall plate that has two (2) posts on
which to mount your transmitter when
not in use.
Post
Installing or changing the battery -
To access the battery compartment
remove the small Phillips head screw
that secures the battery door to the
transmitter assembly. Replace with a
CR2032 battery when necessary. The
battery should be installed with the
positive (+) side up.
Phillips
Head
Screw
Battery
Door
ON
• Press the fan power button
off for at least three seconds to
initiate the Safe-Exit Mode.
• The lights will ash for visual
conrmation.
The lights will stay on 50%
brightness for 20 seconds and
then begin to dim. After a total
of 30 seconds, the lights will be
completely off.
Note: For CFL lighting, the lights
will stay on 100% brightness
for 30 seconds. After a total of
30 seconds, the lights will be
completely off.
The Safe-Exit Program gives
you about thirty seconds of
light when you turn the lights
off to exit the room before the
lights go out. To use Safe-Exit:

Produkspesifikasjoner

Merke: Casablanca
Kategori: Ikke kategorisert
Modell: 99019

Trenger du hjelp?

Hvis du trenger hjelp med Casablanca 99019 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Casablanca Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer