Emko EPM-7790 Bruksanvisning

Les nedenfor 📖 manual på norsk for Emko EPM-7790 (37 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/37
EPM-7790 72x72 DIN Size Control Panel For V/F Speed Controller
- 4 Digits Display
- Easily adjustable set value from front panel
- Configurable display scale between -1999 and 9999
- Adjustable decimal point
- Set value low limit and set value high limit boundaries
- Adjustable ramp up and ramp down time
- Forward, Reverse direction outputs and error input for V/F Speed
Controller
- 0/2...10V Voltage output or 0/4...20mA Current output
(It must be determined in order.)
- Password protection for programming and adjustment sections
Z Z
EPM-7790 72 x 72 DIN Size
Control Panel For V/F Speed Controller
Instruction Manual. ENG EPM-7790 02 V02 07/13
2
Instruction manual of EPM-7790 unit consists of two main sections. Explanation of these
sections are below. Also, there are other sections which include order information and technical
specifications of the device. All titles and page numbers in instruction manual are in
CONTENTSsection. User can reach to any title with section number.
Installation:
In this section, physical dimensions of the device, panel mounting, electrical wiring,
physical and electrical installation of the device to the system are explained.
Operation
Also in these sections, there are warnings to prevent serious injury while doing the
physical and electrical mounting or using the device.
Explanation of the symbols which are used in these sections are given below.
and Parameters:
In this section user interface of the device, accessing to the parameters, description of the
parameters are explained.
ABOUT INSTRUCTION MANUAL
a
c
i
This symbol is used to determine the dangerous situations as a result of an electric
shock. User must pay attention to these warnings definitely.
This symbol is used for safety warnings. User must pay attention to these
warnings.
This symbol is used to determine the important notes about functions and usage of
the device.
3
1.PREFACE............................................................................................................................................
1.1 GENERAL SPECIFICATIONS
1.2 ORDERING INFORMATION
1.3 WARRANTY
1.4 MAINTENANCE
2.INSTALLATION...................................................................................................................................
2.1 GENERAL DESCRIPTION
2.2 FRONT VIEW AND DIMENSIONS OF EPM-7790 UNIT
2.3 PANEL CUT-OUT
2.4 ENVIRONMENTAL RATING
2.5 PANEL MOUNTING
2.6 INSTALLATION FIXING CLAMP
2.7 REMOVING FROM THE PANEL
3.ELECTRICAL WIRING........................................................................................................................
3.1 TERMINAL LAYOUT AND CONNECTION INSTRUCTIONS
3.2 ELECTRICAL WIRING DIAGRAM
3.3 VIEW OF THE DEVICE LABEL
3.4 SUPPLY VOLTAGE INPUT CONNECTION OF THE DEVICE
3.5 GALVANIC ISOLATION TEST VALUES OF EPM-7790 UNIT
3.6 ANALOGUE OUTPUT, DIGITAL INPUT/OUTPUTS CONNECTION WITH V/F SPEED
CONTROLLER
3.6.1 DEVICE WITH
3.6.2 DEVICE WITH
4.FRONT PANEL DEFINITION AND ACCESSING TO THE MENUS....................................................
4.1 OBSERVATION OF THE SOFTWARE REVISION ON THE DISPLAY
4.2 CHANGING AND SAVING SET VALUE
4.2.1 CHANGING AND SAVING SET VALUE WHILE THE MOTOR IS RUNNING
4.2.2 CHANGING AND SAVING SET VALUE WHILE THE MOTOR IS NOT RUNNING
4.3 PROGRAM PARAMETERS
4.4 EASY ACCESS DIAGRAM OF PROGRAMMING MODE PARAMETERS
4.5 ENTERING TO THE PROGRAMMING MODE, CHANGING AND SAVING PARAMETER
4.6 MOTOR START/STOP OPERATION
5.FAILURE MESSAGE IN EPM-7790 UNIT...........................................................................................
6.SPECIFICATIONS................................................................................................................................
(0/2...10V ) ANALOGUE OUTPUTZ
(0/4...20mA ) ANALOGUE OUTPUTZ
Contents
Page 5
Page 37
Page 18
Page 12
Page 7
Page 36

Produkspesifikasjoner

Merke: Emko
Kategori: Ikke kategorisert
Modell: EPM-7790

Trenger du hjelp?

Hvis du trenger hjelp med Emko EPM-7790 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Emko Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer