Ferrofish Pulse 16 Bruksanvisning

Les nedenfor 📖 manual på norsk for Ferrofish Pulse 16 (15 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/15
USERS GUIDE
Version 1.0a
Ferrofish
Advanced Audio Applications
Brüderstr. 10, 53545 Linz am Rhein, Germany www.ferrofish.de
4
Introduction
Dear Customer,
Thank you for purchasing our product. We are very pleased that you have chosen the
PULSE16 series from our product range.
Using your PULSE16 you can simultaneously convert 16 analog channels to digital and
16 channels to analog. As digital interface, you can choose between ADAT and option-
ally MADI, and you can freely route between them in groups of 8 channels.
We also added a headphone output so you can monitor mono or stereo channels from
an arbitrary source.
Two TFT screens show all analog input and output levels at a time. The intuitive one
knob operation makes using the PULSE16 a breeze.
We sincerely hope that you will enjoy using your PULSE16 as much as we enjoyed de-
veloping it. Should you have any suggestions, praise or criticism for us, please visit us on
Facebook or at www.ferrofish.de - a handwritten letter is of course also happily received.
Warm greetings from Linz near the river Rhine.
The Ferrofish Team
Symbols used in this manual:
This symbol indicated sections of detailed explanation.
Paragraphs showing this symbol require the readers attention.
Software and Updates
For more information, updates and support please visit our website: www.ferrofish.de
Scope of Delivery
This package includes:
1x PULSE16 device
1x Instructions (German & English)
1x Power supply 12V
8
Main Menu – CLOCK
Inside this menu you can select the source of the wordclock and the sample frequency
of the PULSE16 when running as Master:
Clock Screen Pulse16 Clock Screen Pulse16 MX
The numbers below the labels show the internal generated clock frequency when set to
Master or the measured external sample frequency. If no sample rate is detected “---
is shown.
MASTER
If the clock source is set to Master, the internal wordclock generator of the PULSE16 is
used. All other digital devices attached have to be set to Slave.
ADAT + MADI (MADI MX option required)
The wordclock is extracted and conditioned from the ADAT or MADI data stream and
send to the Wordclock output. The conditioning is done via a proprietary circuit.
BNC
When using an external wordclock on the BNC IN of the PULSE16, the wordclock signal
will also be routed thru the jitter reduction stage and sent back to the BNC OUT.
Main Menu – CLOCK-SMUX mode
Although the PULSE16 always works using the 16 analog input and output channels,
the number of ADAT channels is dependent on the sample frequency and the SMUX
mode:
SMUX/1
The SMUX/1 mode allows sampling rates from 32kHz up to 48kHz.

Produkspesifikasjoner

Merke: Ferrofish
Kategori: Ikke kategorisert
Modell: Pulse 16

Trenger du hjelp?

Hvis du trenger hjelp med Ferrofish Pulse 16 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Ferrofish Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer