Hamilton Beach Fury HBH550 Bruksanvisning
Hamilton Beach
Blender
Fury HBH550
Les nedenfor 📖 manual på norsk for Hamilton Beach Fury HBH550 (20 sider) i kategorien Blender. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/20
Find Recipes and Demo Videos at
www.commercial.hamiltonbeach.com
840220901
11/12
Modèle HBH550
Mélangeur de bar
Manuel d’utilisation
Page 7
Model HBH550
Bar Blender
Operation Manual
Page 2
Modelo HBH550
Licuadora para Bar
Manual de Uso
Página 12
READ BEFORE USE.
LIRE AVANT D’UTILISER.
LEA ANTES DE USAR.
Blender Safety
IMPORTANT: This operation manual should be reviewed with all equipment operators as part of your
operator training program.
1. Read the Operation Manual before using blender.
Keep Operation Manual handy.
2. Plug into a grounded 3-prong outlet.
3. Do not remove ground prong.
4. Do not use an adapter.
5. Do not use an extension cord.
6. Disconnect power before cleaning or servicing.
7. To reduce risk of personal injury, unplug cord from
outlet when not in use, and before putting on or
taking off parts.
8. To protect against electrical shock, do not immerse
cord, plug, or blender base in water or any other
liquid.
9. Do not spray the base with a high-pressure spray gun.
10. Extreme caution must be used when moving an
appliance containing hot oil or other hot liquids.
11. Do not use appliance for other than intended use.
12. Not intended for use by or near children.
13. Children should be supervised to ensure that they
do not play with the appliance.
14. The appliance is not intended for use by persons
(including children) with reduced physical, sensory,
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
15. The use of accessory attachments not recommended
by the appliance manufacturer may cause injuries.
16. To reduce risk of personal injury and to prevent
damage to blender or container and cutter assembly,
DO NOT insert utensils into blender container while
operating blender.
17. Do not store any kitchen utensils in the container
because the blender would be damaged if
inadvertently turned on.
18. To prevent possibility of serious personal injury, keep
hands out of blender container while operating blender.
Always operate blender with container lid in place.
19. Avoid contacting moving parts.
20. Blades are sharp. Handle carefully.
21. If cutter assembly blades are loose, discontinue use
immediately and replace container. Do not attempt to
repair or tighten cutter assembly.
22. Inspect container and cutter assembly daily. Do not
use broken, chipped or cracked container. Check
cutter for wear, nicks, or broken blades. Do not use
broken or cracked cutting blades.
23. Do not use outdoors.
24. This appliance is intended for short periods of
operation, with a rated operating time of 3 minutes.
25. Do not leave blender unattended while it is operating.
26. To prevent damage to blender, container, or cutter
assembly, DO NOT move or shake blender while in
operation.
27. When blending hot liquids, remove center-piece of
two-piece lid. Hot liquids may push lid off jar during
blending. To prevent possible burns: Do not fill blender
jar beyond the 1 quart (1 liter) level. With the protection
of an oven mitt or thick towel, place one hand on top
of lid. Keep exposed skin away from lid. Start blending
at lowest speed.
28. Always operate blender with container lid in place.
29. Do not operate any appliance with a damaged cord
or plug or after the appliance malfunctions, or is
dropped or damaged in any manner. Call the Technical
Service number, , for 866-285-1087 910-693-4277or
instructions on examination, repair, or electrical
or mechanical adjustment.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – When using electrical appliances, basic safety precautions should be followed,
including the following:
2
– SAVE THESE IN STRUC TIONS –
For assistance or replacement parts, call our Technical Service number:
866-285-1087 910-693-4277or
8 a.m. – 5:00 p.m. EST Monday – Friday
www.commercial.hamiltonbeach.com
Technical Service
Cut Hazard
Always place lid on container when
blending.
Do not put hands, spoons, or other
utensils in container when blending.
Failure to follow these instructions can
result in broken bones, cuts, or other
injuries.
Burn Hazard
Always use caution when blending
hot contents.
Failure to follow these instructions can
result in burns.
Sanitize using 1 tablespoon (15 ml) of household
bleach per 1 gallon (3.8 liter) of clean, cool water
(60°F/16°C), mixed according to the instructions
on the bleach.
1. Fill container with sanitizing solution, replace
lid and filler cap and run on LOW speed for 2
minutes. Empty container.
2. Wipe exterior with soft cloth dampened with
sanitizing solution.
3. Immerse lid and filler cap in sanitizing solution
for 2 minutes.
4. Place HIGH empty container on base and run on
speed for 2 seconds to remove any moisture
from the cutter assembly.
5. When ready to use, rinse with clean water.
Sanitizing
Electrical Shock Hazard
Disconnect power before
cleaning blender base.
Failure to follow these
instructions can result in
death or electrical shock.
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
3
Replacement Parts
Part Description
64 oz. polycarbonate container
Part Number
6126-650-OP
The following component is subject to wear and should be replaced at least
yearly. We recommend keeping a replacement container on hand.
1817 19
OR
Produkspesifikasjoner
| Merke: | Hamilton Beach |
| Kategori: | Blender |
| Modell: | Fury HBH550 |
Trenger du hjelp?
Hvis du trenger hjelp med Hamilton Beach Fury HBH550 still et spørsmål nedenfor, og andre brukere vil svare deg
Blender Hamilton Beach Manualer
15 Desember 2024
15 Desember 2024
15 Desember 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Blender Manualer
- Blender Cecotec
- Blender Imarflex
- Blender Kogan
- Blender Create
- Blender Orbegozo
- Blender Sencor
- Blender Orava
- Blender Khind
- Blender Taurus
- Blender Turbotronic
- Blender Hendi
- Blender Livoo
- Blender Scarlett
- Blender Tower
- Blender Tristar
- Blender Eldom
- Blender Elba
- Blender Black And Decker
- Blender Witt
- Blender Wilfa
- Blender Ambiano
- Blender Innoliving
- Blender Blendtec
- Blender Mystery
- Blender Izzy
- Blender Waring Commercial
- Blender Girmi
- Blender Beautiful
Nyeste Blender Manualer
15 Desember 2024
15 Desember 2024
12 Desember 2024
12 Desember 2024
5 Desember 2024
28 Oktober 2024
28 Oktober 2024
28 Oktober 2024
27 Oktober 2024
24 Oktober 2024