Hawke Nite-Eye 2000 Bruksanvisning

Hawke Ikke kategorisert Nite-Eye 2000

Les nedenfor 📖 manual på norsk for Hawke Nite-Eye 2000 (13 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 5 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/13
NITE-EYE 2000
3
OVERVIEW
• The Hawke Nite-Eye 2000 digital camera can be used for observation and photo/video capture in
complete darkness or low light conditions.
• View up to 200 meters in complete darkness using digital night vision technology.
• A built-in infrared illuminator provides additional light when in darker conditions. The infrared
strength can be adjusted to suit your situation.
• Quick and easy transfer of photos/videos and battery recharge via USB.
• Rechargeable 18650 lithium battery for extended performance and runtime.
BATTERY INSTALLATION
Unscrew the battery cover located underneath the front lens. Insert a 18650 battery, negative end
rst, then screw the battery cover back in place.
Notes:
• Only use 3.7V 18650 rechargeable batteries.
Ensure the battery has sufcient charge.
Ensure battery has been inserted negative end rst.
Ensure the battery is charged before rst use to increase life expectancy.
4
RECHARGING
The Nite-Eye 2000 is powered by a 18650 lithium battery. The battery can either be recharged in
the Nite-Eye 2000 unit, or separately if using a battery charger (not supplied).
• To charge the battery while installed in the camera, connect the power adaptor to the USB cable
and insert this into the mini-USB socket on the Nite-Eye 2000, located on the underside of the
unit, beneath the rubber ap.
• The LED charging indicator next to the mini-USB socket will glow red while the battery is
charging and turn off when it is fully charged.
• When recharging from mains power supply the Nite-Eye 2000 will automatically power on. If not
needed, the camera can be powered off by pressing and holding the ON/OK” button for 3 seconds.
• The Nite-Eye 2000 can also be charged by connecting directly to a computer via USB. In this
mode data transfer will also be available.
MEMORY CARD INSTALLATION
• The Nite-Eye 2000 accepts micro SD memory cards only.
• Memory card capacity between 2GB-32GB only.
• Install the micro SD memory card into the memory card socket located on the underside of the
unit, beneath the rubber ap.
Install micro SD memory card with exposed contacts rst and facing outwards.

Produkspesifikasjoner

Merke: Hawke
Kategori: Ikke kategorisert
Modell: Nite-Eye 2000

Trenger du hjelp?

Hvis du trenger hjelp med Hawke Nite-Eye 2000 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Hawke Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer