Hikvision AE-DC5313-C6PRO Bruksanvisning
Les nedenfor 📖 manual på norsk for Hikvision AE-DC5313-C6PRO (2 sider) i kategorien Dashcam. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/2
A
1
C Packing List
234 5 6
A Legal Statement A Legal Statement
HikDashcamC6 PRO
User Manual
©2020 Hangzhou HikAuto Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product.
Pictures, charts, images and all other information hereinafter are for
description and explanation only. The information contained in the
Manual is subject to change, without notice, due to firmware updates
or other reasons.
Trademarks
•and other Hikvision's trademarks and logos
are the properties of Hikvision in various jurisdictions.
•Other trademarks and logos mentioned are the properties of
their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS
MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL
FAULTS AND ERRORS”. HIKAUTO MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE
USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKAUTO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS
PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION
OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON
BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE
PRODUCT, EVEN IF HIKAUTO HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR
INHERENT SECURITY RISKS, AND HIKAUTO SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKAUTO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING
THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU
ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT
DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING
WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY
RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU
SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES,
INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF
MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF
CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE
CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR
FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.
FCC Information
Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
residential environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver. —
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized European
standards listed under the RE Directive
2014/53/EU, the EMC Directive 2014/30/EU, the LVD Directive
2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon
the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info.
2006/66/EC (battery directive): This product contains
a battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the
product documentation for specific battery
information. The battery is marked with this symbol, which may include
lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your supplier or to a designated
collection point. For more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards
requirements.
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
B Regulatory Information B Regulatory Information
The equipment should be installed and operated with a minimum
distance 20 cm between the radiator and your body.
B Regulatory Information
(2) this device must accept any interference, including
interference that may cause undesired operation of the device. Le
présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radioexempts de licence. L'exploitation
est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for
successful communication.
Conformément à la réglementation d'Industrie Canada, le présent
émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou
inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le
but de réduire les risques de brouillage radioélectrique à
l'intention des autres utilisateurs, il faut choisir le type d'antenne
et son gain de sorte que la puissance isotrope rayonnée
équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à
l'établissement d'une communication satisfaisante.
This equipment should be installed and operated with a minimum
distance 20cm between the radiator and your body.
Cet équipement doit être installé et utilisé à une distance
minimale de 20 cm entre le radiateur et votre corps.
UD21225B
2
5
6
0
X
1
6
0
0
P
F
1
.
6
L
E
N
S
1
3
45
2
1.Dashcam × 1
2.Car Charger × 1
3 .Power Cord × 1
4 .Electrostatic Film × 1
5 . User Manual × 1
2
5
6
0
X
1
6
0
0
P
F
1
.
6
L
E
N
S
D Parts Introduction E Installation F Mobile Phone Connection G Function Description
7
H Cautions
8
I Troublshooting
9
H Troubleshooting
10 11 12
Model
Aperture
Pixel
Max. Resolution
Max. Frame Rate
Angle
Screen
Storage
G-Sensor
GPS
Wi-Fi
Sound Recording Power Supply
Power Consumption
Operating Temperature and Humidity
Installation Type
Dimensions (L × W × H)
Weight
AE-DC5313-C6 PRO
F1.6
5 MP
1600p
60 fps
130°
3”
TF card, 16 GB to 128 GB
Built-in, collision triggered recording and recording lock
Built-in
Yes
Yes
5 VDC, 2 A
Approx. 3.5 W
-20 °C to 70 °C (-4 F to 158 F). Humidity 95% or less.
General
90 × 88 × 70 mm (3.6ʺ × 3.5ʺ × 2.8ʺ)
Approx. 140 g (0.3 lb.)
Scan QR Code
<
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
Specifications
1
3
Clean the windshield and
paste the electrostatic film
onto it.
Avoid introducing air bubble.
DO NOT paste the film
repeatedly.
Peel off the release paper of
3M tape and install the
dashcam onto the center of
the electrostatic film. Connect
the dashcam with one end of
the power cord along the red
line shown in figure.
Connect the other end of
power cord to the car
charger and connect car
charger to cigarette lighter.
Adjust the surveillance angle
and the installation is
completed. The tilt adjusting
angle is from -10 to 10
° °.
Scan the QR code to download and
install HikDashcam app.
Add the dashcam to the app.
a. Run the HikDashcam app.
b. Tap Wi-Fi Connection.
c. In Wi-Fi list, select the Wi-Fi SSID
of the target dashcam and enter
Wi-Fi password to build
connection.
•You can set the parameters of the
dashcam.
•For iOS, you need to go to Wi-Fi
settings of your phone to connect
to the Wi-Fi of dashcam.
Edit the dashcam password to
activate it to avoid abnormal
recording after connecting to Wi-Fi.
1
Dashcam Wi-Fi default parameters:
•Wi-Fi SSID: HIKVISION-C6PRO-XXXX
(XXXX refers to the last four
characters of verification code.)
•Wi-Fi password: 1234567890
(please edit password after logging in
for the first time.)
Power On and Power Off
Power On: When you start up the engine, the dashcam powers on.
Power Off: When you turn off the engine, the dashcam powers off.
Recording
Two recording types are provided: Normal Reording and Emergency
Recording. Sound and mute recordings are selectable. Sound recording is set
as default. You can set audio settings on the device or turn off sound
recoding in app.
Safety Instruction
These instructions are intended to ensure that users can use the product
correctly to avoid danger or property loss.
Cautions: Injury or equipment damage may occur if any of the cautions are
neglected.
•In the use of the dashcam, you must be in strict compliance with the local
laws and regulations.
•You are recommended to install the dashcam on the location of rear mirror
to ensure the dashcam can record with the best monitoring view. DO NOT
install the dashcam on the location that will block the driver’s sight.
•Keep the user manual properly for future reference. See initial
connection of dashcam in user manual.
•Purchase the TF card from legal channel. To ensure safe and
stable data transmission, it is recommended to use TF card of
Class 10 or above.
•Format the new TF card first before using the card.
•To protect TF card from damage, shut down the dashcam before
installing and uninstalling TF card.
•If the dashcam is directly connected with the vehicle power
system, you are recommended to power off the dashcam when the
engine is off. Disconnect cigarette lighter to avoid insufficient
voltage and abnormal startup. Reconnect cigarette lighter to
ensure dashcam work normally when you start the car again.
•Operating temperature is from -20 C to 70 C (-4 F to 158 F). To
protect the dashcam, DO NOT use it in high temperature, low
temperature, or high-humidity environment. Keep the dashcam
from rain and dust.
•The manual is subject to update. The functions of dashcam may
vary according to different models.
*The driving assistance function of the device only sends alarm or warning to
the driver and cannot replace the driver’s judgement and operation. With the
device, you also should drive carefully to avoid traffic accident or violation.
Pedestrian or object recognition failure or recognition error may occur due to
external factors. DO NOT overly rely on the driving assistance function.
Trouble Solution SolutionTrouble
The dashcam drops
easily.
Starting the dashcam
failed.
The dashcam powers
off easily.
Recording is
abnormal and
indicator is unlit.
Recording is blurred.
Recording is mute.
Dashcam reboots
itself.
Clean the windshield before installation.
Check whether the vehicle is started and power
supply is normal.
Check whether the car charger is tightly connected.
Restore to defaults: hold the button until theRESET
startup music is heard.
Make sure the power cord is in good condition.
Make sure the power cord is tightly connected to the
according interfaces.
Make sure that the dashcam started up successfully.
Check whether the TF card is inserted.
Check the status of TF card, e.g. its format, its lifespan.
Change TF card if it is not well.
Make sure the protective film is peeled off.
Check whether the windshield or the lens of dashcam
is blurred.
Set audio settings on the device or turn on sound
recording in HikDashcam app.
Check whether the car charger is equipped with power
supply interface of 5 VDC, ≥ 2 A.
The mobile phone
cannot display
recordings.
It may be relevant with the player or system of the
phone. Please connect TF card to your computer and
display the recordings.
TF card is not
detected when you
connect dashcam to
computer with the
supplied power cord.
Dashcam does not support data transmission and the
supplied power cord is only for charging.
If you need to transfer data, please connect TF card
to your computer.
Wi-Fi connection
takes a long time.
It may be caused by the interferrence of the
surrounding Wi-Fi signals. Please use the dashcam in
an environment of less interferrence.
Shut down unnecessary programs in your phone to
release some resources for HikDashcam app and
reconnect Wi-Fi.
Dashcam Wi-Fi
password is forgotten.
The default password is 1234567890. If you have
revisied the password, regain the password by the
following steps.
1. Hold the button on dashcam until the startupRESET
music is heard and the dashcam is restored to
defaults.
2. Go to Wi-Fi Connection interface in HikDashcam
app.
3. Select Wi-Fi SSID and log in with default password
1234567890.
1
2
3
Power Cord
Car Charger
Cigarette
Lighter
•The power mode of cigarette lighter may vary by different vehicle
types. Some may be powered constantly. In this case, please make
sure that the dashcam stops after you turn off the vehicle engine.
Otherwise, insufficient voltage may occur to vehicle battery.
•Make sure you have connected the dashcam to power according to
Step 2 and Step 3 in Installation section.
·Check whether the car charger is tightly connected.
13
4
8
9
7
1
2
3
5
2
5
6
0
X
1
6
0
0
P
F
1
.
6
L
E
N
S
1. RESET Button
(Restore the device to defaults.)
2. TF Card Slot
3. Lens
4. Microphone
5. Speaker
7. Power Interface
8. MicroUSB Interface
(It can be extended as 4G
interface.)
9. Screen
10. Buttons
4
0°
10°
-10°
·Check whether the 3M tape is tightly sticked to the
electrostatic film before the installation.
·Turn on sound through the the audio control function
of the dashcam.
2
6
10
6. 3M Tape
·
·
Mobile phone
cannot connect to
dashcam.
Make sure HikDashcam app is installed.
Please restart the dashcam to the app.
No GPS signal. ·
·
Check whether the GPS function is enabled.
Normally, the GPS function is enabled by default.
Make sure the device is not in the places of weak
signal or no signal, such as underground garage.
·Make sure there is no metal around the device
·
because metal will interfere with GPS signal.
Make sure the location where the device is installed is
not pastd with radiation protection film. The film will
interfere with GPS signal.
Produkspesifikasjoner
| Merke: | Hikvision |
| Kategori: | Dashcam |
| Modell: | AE-DC5313-C6PRO |
Trenger du hjelp?
Hvis du trenger hjelp med Hikvision AE-DC5313-C6PRO still et spørsmål nedenfor, og andre brukere vil svare deg
Dashcam Hikvision Manualer
26 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Dashcam Manualer
- Dashcam Kogan
- Dashcam Midland
- Dashcam Minolta
- Dashcam IRoad
- Dashcam Cobra
- Dashcam Lamax
- Dashcam AZDome
Nyeste Dashcam Manualer
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
22 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024