HK Audio CXR-210 Bruksanvisning

HK Audio Ikke kategorisert CXR-210

Les nedenfor 📖 manual på norsk for HK Audio CXR-210 (16 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/16

CXR-210

Art. Nr.: 1008185

Flight & tilt rail of the CONTOUR X 210 LT

Flug- & Neigeschiene der CONTOUR X 210 LT

Original mounting instructions 1.0

Original-Montageanleitung 1.0

Mounting instructions

1. Important notes on safety and use……………………………2

2. Introduction…………………………………………….…………………4

3. Dimensions & technical specifications…………………….…4

4. ICF……………………….……………………..……………………………..4

5. Mounting the CXR-210 ………………………………………………4

6. Angle table……………………………………….……………………….6

7. Intended use……………………………………..………………………6

Montageanleitung

1. Wichtige Hinweise zu Sicherheit und Gebrauch ………8

2. Einleitung…………………………………………………………………10

3. Abmessung & technische Daten…………………………….…10

4. ICF……………………..……………………..……………………………..10

5. CXR-210 Montage……………………..…………………………….10

6. Winkeltabelle…………………………………...……………………..12

7. Bestimmungsgemäße Verwendung…..……………………..12

CONTOUR X 210LT

Welcome to the HK Audio family!

Thank you for choosing a brand-name product

made by our company. It was engineered and

built with the greatest care so it will serve you

well for many tomorrows to come.

Be sure to read these operating instruc-

tions carefully and keep them for future

reference. Here's wishing you the best sound at

every occasion!

Your HK Audio Team

Warranty

you’ll then get a free 5-year warranty!

http://warranty.hkaudio.com

The warranty registration is only valid if made

within 30 days of the date of purchase.

HK Audio

Technical service

Postfach 1509

66595 St. Wendel, Germany

Fax: +49 6851 905 100

Important notes on safety and use!

Please read before use!

This symbol, wherever it appears, alerts

you to important operating and maintenance

instructions in the accompanying literature. Read

the manual.

This symbol, wherever it appears, tells

you: Take care! Hot surface! To prevent burns you

must not touch.

All electrical and electronic products

including batteries should be disposed of

separately from the municipal waste stream via

designated collection facilities appointed by the

government or the local authorities.

Safety instructions

The suitability of the supporting structure

or the load-bearing capacity of the structure, as

well as the suitability and dimensioning of the

attachment points must be ensured before

installing the system.

"Information on the load-bearing capacity of

structures generally refers to static loads in a

vertical direction (without dynamic load compo-

nents).

Attachment points on the supporting structure

are regarded as interfaces to the structure and

must be able to safely absorb loads. Attachment

points are deﬁ ned positions on the supporting

structure, e.g. intersections on truss girders or

eyelets permanently attached to the supporting

structure. Below this interface to the structure,

all elements in the load line are designed to be

intrinsically safe. In addition, single-fault safety

measures are implemented where necessary. The

attachment of loads to structures is only permit-

ted if the operator can provide clear information

on the nominal load capacity of the attachment

points. In particular, these are:

• Size of the rated load capacity

• Rated load capacity in relation to the direction

of force

Only the attachment points approved by the

operator may be used. The operator’s speciﬁ -

cations for the load capacity of the attachment

points must not be exceeded either during

assembly and dismantling or during operation.

A load measuring device can be used for this

purpose. When planning an event or production,

dynamic forces, possible incident-induced loads

and additional loads during operation as well as

during assembly and dismantling must be taken

into account in addition to the dead loads. For

example, additional forces arise due to inclined

bracing and acceleration of loads as well as jerky

stopping of moving loads.” (Source: DGUV Infor-

mation 215-313).

In addition, the respective national law must be

observed.

The suitability and su cient load-bearing

capacity of the components used in connection

with the system in the load line (e.g. shackles

and other slings, lanyards, tensioning elements,

hoists, load-bearing equipment) must be

ensured for the application. Persons are only

permitted to stand under the system if all (other)

components in the load line are designed to be

intrinsically safe. Elements that are not expressly

intended for use above persons may be suitable

under certain circumstances if they are loaded to

a maximum of half the speciﬁ ed load capacity.

Round slings made of synthetic ﬁ bres may not

be used over people without additional securing.

In addition, the respective national law must be

observed. The operator is responsible for

maintaining the safe operating condition and for

the suitability of the elements used in the load

line.

The operator must arrange for the

following inspections to be carried out:

- Inspection of the components of the rigging

hardware (ﬂ ight rail, the rigging hardware

attached to the speaker cabinet and all other

components used for rigging) before ﬁ rst use

and thereafter periodically by a qualiﬁ ed/com-

petent person to ensure that they are in a safe

operating condition.

- After particular damage-causing events (e.g.

crash, overloading of system components),

the operator must arrange for an extraordinary

inspection of the a ected components by a

competent person.

The applicable national laws and regulations

must be observed with regard to the type, dead-

lines and scope of the inspections. The operating

conditions must be taken into account.

However, the scope of testing for the inspection

before initial commissioning, periodic inspection

and inspection after particular damage-causing

events includes at least the following criteria:

Condition, damage, cracks, deformation, corro-

sion, functionality/mobility, wear, fastening and

securing of detachable connections, e ective-

ness of interlocks, completeness of connecting

elements, legibility of type plate/permissible

load capacity.

The inspection interval for the periodic inspection

must not be more than one year. The inspections

must be documented.

- The components of the rigging hardware (ﬂ ight

rail, the rigging hardware attached to the

speaker cabinet and all other components used

for rigging) must be checked for visible defects,

wear, functionality, apparent operational safety

and legibility of markings by a person instruct-

ed with regard to this inspection at least before

each use.

If defects are found that impair safety or if the

markings can no longer be clearly identiﬁ ed,

the work equipment must be withdrawn from

further use until it has been properly repaired.

The secondary safety devices (safeties)

must be attached to the following points on the

mid/high units: - Suitable attachment points are

openings for attaching the shackles - The

attachment of secondary safety devices to parts

of the mid/high units other than those

mentioned here is prohibited.

Direct attachment (without ﬂ ight rail)

must only be carried out as described in these

instructions. To tilt the lifted system using

slings, only double-stranded slings that are also

designed for edge loading or equipped with edge

protection may be used. It must be ensured that

the shackles attached under the mid/high unit

can align freely and are not subjected to diagonal

pull. Attach the sling to the mid/high units using

the wide lugs in the centre of the speakers – it is

forbidden to attach it in the intermediate

position (between two speakers).

Version 1.0 04/2024

CONTOUR X 210LT

• English • Deutsch

The components used in connection with

the attachment or rigging of the system (e.g.

hoists, slings, lanyards) must be inspected

periodically by competent persons, taking into

account the ambient conditions, the respective

manufacturer’s speciﬁ cations and the respective

national regulations, and before each installation

by instructed persons.

The operator must carry out a risk

assessment for the respective use of the system.

Among other things, the suitability of the

components used, the deadlines and scope of

the inspection of the work equipment and the

suitability of the personnel deployed must be

checked. With regard to the assembly and

dismantling of the systems, the need for

measures such as barriers and coordination of

the trades involved must also be determined on

a case-by-case basis. Conditions of use and

interactions with the working environment must

be taken into account.

The ﬂ own system must be secured

against twisting and unintentional movement in

the event of wind. This is done by attaching

safety cords to the openings for attaching the

shackles.

Do not use in windy conditions with

impermissible wind speeds. The system must be

removed or lowered and secured by the time

wind force 8 or a gust wind speed of 20 m/s is

reached. Measures must be planned, coordinated

and carried out professionally.

Only slings and hoists certiﬁ ed by their

manufacturer as conforming to 2006/42/EC

(outside the scope of 2006/42/EC of equivalent

quality in accordance with the respective national

regulations) may be used in rigging operations.

Only personnel who are trained and

qualiﬁ ed for the respective task may be

deployed. This applies to assembly, dismantling,

operation, maintenance, troubleshooting, repair

and inspection.

To create a system consisting of several

mid/high units for rigging operation, these must

ﬁ rst be fully connected to each other on the top

side before lifting. The system may then only be

lifted high enough for the connections to be

made on the underside. Only once the mid/high

units have been fully connected to each other can

the system be lifted further.

The connections of the individual

components of the ﬂ ight rail are self-locking and

may only be loosened/replaced by the manufac-

turer or by a specialist company authorised by

the manufacturer.

To avoid swaying when lifting loads using

a hoist, make sure the load’s centre of gravity is

vertically below the hoist.

Suitable and su cient lighting must be provided

for assembly/dismantling, cleaning, trouble-

shooting, maintenance and repair. National

regulations must be observed in this respect.

Materials must be stored securely on a

su ciently stable surface. Tra c routes, in

particular escape and rescue routes, as well as

ﬁ re extinguishing equipment, must always be

kept clear at the place of use.

Operating the system outdoors, including

any work carried out on the system, is prohibited

during thunderstorms. If there is a thunderstorm

on the way when used outdoors: Stop work, do

not touch any conductive parts, do not stand

under/near raised systems. If possible, go to a

safe room/area. Weather forecasts must be

continuously monitored.

Read these instructions. Keep these

instructions. Follow all warnings and instructions

marked on the product and in this manual.

• Do not place objects containing liquid on the

product – vases, glasses, bottles etc.

• Clean only with dry cloth.

• Do not remove any covers or sections of the

housing.

• Refer all servicing to qualiﬁ ed service person-

nel. Servicing is required when the unit has

been damaged in any way, such as:

- If liquid has been spilled or objects have fallen

into the product.

- If the product does not operate normally when

the operating instructions are followed.

- If the product has been dropped or the cabinet

has been damaged.

• Do not install near heat sources such as radia-

tors, heat registers, stoves or other devices that

produce heat.

• Do not place naked ﬂ ame sources, such as

lighted candles on the product.

• Use only with the cart, stand, tripod, bracket or

table speciﬁ ed by the manufacturer or sold with

the product.

• When a cart is used, use caution when moving

the cart/product combination to avoid injury

from tip-over.

• Use only accessories recommended by the man-

ufacturer, this applies for all kind of accessories,

for example protective covers, transport bags,

stands, wall or ceiling mounting equipment.

In case of attaching any kind of accessories to

the product, always follow the instructions for

use, provided by the manufacturer. Never use

ﬁ xing points on the product other than speciﬁ ed

by the manufacturer.

• No objects should be inserted through the

housing openings.

• This device is capable of producing sound pres-

sure levels of more than 90 dB.

This could lead to permanent hearing damage!

Exposure to extremely high noise levels may

cause a permanent hearing loss.

Wear hearing protection if continuously exposed

to such high levels.

• The manufacturer only guarantees the safety,

reliability and e ciency of this product if:

- Assembly, extension, re-adjustment, modiﬁ ca-

tions or repairs are carried out by the manufac-

turer or by persons authorized to do so.

- The unit is used in accordance with the operat-

ing instructions.

• This product is optimized for use with music

and voice content.

Using this product with sine wave, square wave

or other kind of measuring signals at higher level

may lead to severe damage of the product.

Produkspesifikasjoner

Merke:	HK Audio
Kategori:	Ikke kategorisert
Modell:	CXR-210

Trenger du hjelp?

Hvis du trenger hjelp med HK Audio CXR-210 still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Ikke kategorisert HK Audio Manualer

HK Audio CONTOUR X CX 210LT Bruksanvisning

9 Januar 2025

HK Audio CXR-210 Bruksanvisning

9 Januar 2025

HK Audio SI SERIES P10 Bruksanvisning

9 Januar 2025

HK Audio TB-45N Bruksanvisning

24 Desember 2024

HK Audio TB-45NQ Bruksanvisning

24 Desember 2024

HK Audio TB-HES Bruksanvisning

19 Desember 2024

HK Audio LINEAR 5 LTS A Bruksanvisning

19 Desember 2024

HK Audio CF-DO Extension Bruksanvisning

19 Desember 2024

HK Audio PP-CP Bruksanvisning

19 Desember 2024

HK Audio TB-210NQ Bruksanvisning

19 Desember 2024

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer

Amazfit Bip 5 Unity Bruksanvisning

16 Januar 2025

Lowepro Flipside Trek BP 350 AW II Bruksanvisning

16 Januar 2025

Audison Prima APS 8 D Bruksanvisning

16 Januar 2025

Black Line BLMH 36 Bruksanvisning

16 Januar 2025

Absco M 151151 Bruksanvisning

16 Januar 2025

ADDAC System ADDAC200CT Bruksanvisning

16 Januar 2025

Emerio LR-131325.1 Bruksanvisning

16 Januar 2025

Sony WRT-822B Bruksanvisning

16 Januar 2025

IKEA SMÅSPORRE 204.570.22 Bruksanvisning

16 Januar 2025

IKEA SÄFFEROT 904.570.71 Bruksanvisning

16 Januar 2025