Hotone Ampero Control Bruksanvisning
Hotone
Kontroller
Ampero Control
Les nedenfor 📖 manual på norsk for Hotone Ampero Control (12 sider) i kategorien Kontroller. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/12
DES I G N I N S P IRATION
APP USER MANUAL
For Firmware V1.13
For Software V1.0.1
※In the interest of product improvement, the specifications and/or the content of products (including but not limited to appearances, packaging design, manual content, accessories, size, parameters and
display screen), are subject to change without prior notice. Please check with local supplier for exact offers. Specifications and features (including but not limited to appearances, colors and size) may vary by
model owing to environmental factors, and all images are illustrative.
CONNECT
3. Press and hold Footswitch 2+3 on your Ampero Control to enable Bluetooth
Pair Mode. The Bluetooth indicator (on the bottom right corner of the screen on
your unit) will ash to indicate pairing status on.
4. When your Ampero Control appears listed on the startup page the app will (
automatically scan all nearby devices), select and tap the “Connect To The
Selected Device” button on the screen. The Bluetooth indicator will stay solid
to indicate a successful connection.
888
888
This dot will ash
PC CC
1 2 3 4
BAN K BANK
Blue tooth MIDI Contro lle r
Hold /Pai r
Press and hold
the footswitch 2+3
1. Turn on the Bluetooth switch on your
mobile device, then turn on your Ampero
Control and launch the app.
2. Login your account (optional).
888
This dot will stay solid
DEFINITION
BANK
Notes:
1. You can enter ofine mode if no device is found.
2. Ampero Control can only be edited by one device at a time. To use other devices, tap
“Settings“ icon on the lower right corner of the screen, nd “Connection Status“ and enter,
then tap “Disconnect”. Connect another device when nished.
3. The default device name is Ampero Control. You can customize your device name if
needed.
4. If search failed (no device found or timeout), you can retry searching by manually tap
“Search Again” button, or restart Bluetooth on your mobile device.
5. When using Bluetooth connection for editing or MIDI control, please keep your Ampero
Control close to your phones/pads/computers for best possible experience. The
recommended range is less than 5m.
A bank of Ampero Control contains the user data listed below:
ŸBank name and description: Max. 16 characters (including space)
ŸThe footswitch modes of 4 built-in footswitches
ŸMIDI messages (no. of messages, channels, types, values, etc. ) assigned on
each footswitch
ŸCTRL 1/2 controller assign and related settings
Ampero Control features 100 banks (00-99).
TO SETUP A FOOTSWITCH
Follow the instructions :
1. Select a bank and select one footswitch. The image on the right indicates
Bank 0 and footswitch 1 is selected.
2. Select a footswitch mode by tapping mode button:
Produkspesifikasjoner
| Merke: | Hotone |
| Kategori: | Kontroller |
| Modell: | Ampero Control |
Trenger du hjelp?
Hvis du trenger hjelp med Hotone Ampero Control still et spørsmål nedenfor, og andre brukere vil svare deg
Kontroller Hotone Manualer
8 Desember 2024
8 Desember 2024
Kontroller Manualer
- Kontroller IFM
- Kontroller Bose
- Kontroller Mitsubishi
- Kontroller Vizio
- Kontroller MOZA
- Kontroller Thrustmaster
- Kontroller Korg
- Kontroller PDP
- Kontroller Gamesir
- Kontroller 8BitDo
- Kontroller Kanlux
- Kontroller Savio
- Kontroller PTZ Optics
- Kontroller Indiana Line
- Kontroller Nacon
- Kontroller AirTurn
Nyeste Kontroller Manualer
6 Desember 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
26 Oktober 2024
24 Oktober 2024
22 Oktober 2024
20 Oktober 2024