I-PRO WV-QJB506 Bruksanvisning

Les nedenfor 📖 manual på norsk for I-PRO WV-QJB506 (10 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/10
1
av0824-0
PGQP3729ZA
Before attempting to connect or install this product, please read these instructions carefully
and save this manual for future use.
The external appearance and other parts shown in this manual may differ from the actual
product within the scope that will not interfere with normal use due to improvement of the
product.
i-PRO Co., Ltd. assumes no responsibility for injuries or property damage
resulting from failures arising out of improper installation or operation
inconsistent with this documentation.
Base Bracket
Model No. WV-QJB506
Installation Guide
© i-PRO Co., Ltd. 2024
https://www.i-pro.com/
Included Installation Instructions
“<Control No.: C****>” used in these documents should be used to search for
information on our technical information website (https://i-pro.com/products_
and_solutions/en/surveillance/learning-and-support/knowledge-base/technical-
information) and will guide you to the right information.
2
Caution:
Before attempting to connect or operate
this product, please read these instruc-
tions carefully.
Notice:
This product is not suitable for use in loca-
tions where children are likely to be pres-
ent.
Do not install this product in locations
where ordinary persons can easily reach.
For information about screws and other
parts required for installation, refer to the
corresponding section of this document.
Do not use this bracket except with suitable cameras.
Failure to observe this may cause a drop resulting in injury or accidents.
Refer installation work to the dealer.
Installation work requires technique and experience.
Failure to observe this may cause fire, electric shock, injury, or damage to the product.
Be sure to consult the dealer.
The screws and bolts must be tightened to the specied torque.
Failure to observe this may cause a drop resulting in injury or accidents.
Install the product accurately and securely on the installation surface in
accordance with the installation instructions.
Failure to observe this may cause injury or accidents.
Do not rub the edges of metal parts with your hand.
Failure to observe this may cause injury.
When using this product, also read the “Precautions” described in the operating
instructions for the camera to be attached.
Precautions
3
Preface
This product is a base bracket for a camera.
Use this product when installing the camera to the installation surface and when using a
conduit to make wiring.
The latest information about the supported cameras <Control No.: C0501>
Ambient operating temperature: –50 °C to +60 °C {–58 °F to +140 °F}
Dimensions: 197 mm (W) × 50 mm (H) × 138 mm (D)
{7-3/4 inches (W) × 1-31/32 inches (H) × 5-7/16 inches (D)}
Mass: Approx. 490 {1.08 lbs}g
Finish: Aluminum die cast, Black <WV-QJB506-B>
Specifications
In order to prevent injury, this product must be securely mounted to the installation
surface according to Installation Guide.
Make sure to remove this product if it will no longer be used.
Precautions for installation
Standard Accessories
Camera mounting screw (M5 x 20 mm {25/32 inches}) ............... 3 pcs. (of them, 1 for spare)

Produkspesifikasjoner

Merke: I-PRO
Kategori: Ikke kategorisert
Modell: WV-QJB506

Trenger du hjelp?

Hvis du trenger hjelp med I-PRO WV-QJB506 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert I-PRO Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer