Imarflex IR-230RS Bruksanvisning

Imarflex Stryke IR-230RS

Les nedenfor 📖 manual på norsk for Imarflex IR-230RS (2 sider) i kategorien Stryke. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
CLEANING AND MAINTENANCE:
1. Unplug the iron after every use.
2. Make sure to allow the iron to cool down before cleaning.
3. Wipe the sole plate with soft damp clothe s.
Note:
(1) Do not immerse the iron in water or any other liquids.
(2) To protect the sole plate, always store iron in heel rest
position.
REMINDER: Please do not forget to ll up and send the
warranty card with receipt to our email address
imarflexfb@evergoodinc.com
Distributed By: Evergood Unlimited Corp.
901 G.Masangkay St., Manila
Made in China
SPECIFICATION
MODEL NO. : IR- 160T
RATED VOLTAGE : 230Va.c. 60Hz
POWER CONSUMPTION : 1000 watts
BOX DIMENSION : 259*119*133mm
UNIT DIMENSION : 250*119*115mm
GROSS WEIGHT : 1.6 kg.
UNIT WEIGHT : 1.5 kg.
IMPORTANT SAFEGUARDS:
When using electrical appliances, basic safety precautions
should always be followed, including the following:
1. Read all instructions carefully.
2. Before using the unit, check if the voltage indicated
corresponds with the convenience outlet (230Va.c.).
3. Do not use any appliance with a damaged cord or plug. If the
cord is damaged it should be replaced with the same type
and size or bring the unit to the nearest authorized service
center.
4. Do not leave the iron unattended while it is connected to the
convenience outlet.
5. Children should be supervised to ensure that they do not play
with the appliance.
6. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of
the appliances by a person responsible for their safety.
7. Do not use two-way socket with other appliance. a
8. To protect against electric shock, do not immerse the iron in
water or any other liquids.
9. The iron should always be turned OFF before plugging or
unplugging from the outlet.
10. Do not allow cord to touch hot surface of the iron. Loop cord
loosely around the iron before storing.
11. Do not touch the sole plate when the unit is plugged in or
while in use. Accident may occur.
12. This appliance is not intended for outdoor use.
13. For household use only: not intended for any business
purposes.
14. Save this instruction for future reference.
DESCRIPTION OF PARTS:
HOW TO USE:
1. Plug the iron to the convenience outlet. in
2. The Power Light Indicator will turn on.
3. Set Variable Temperature Control Knob to desired fabric
temperature. (See the Fabric Guide for the appropriate
fabric temperature in the unit ).
4. Allow the iron to heat for two minutes on heel rest position
before ironing.
5. The Heat Light Indicator will lights up when the unit is
switched ON, the Heat Light Indicator will turn OFF once
the temperature required is reached. The Heat Light
Indicator will remain OFF as long as the iron keeps the
selected temperature, as the temperature decreases, the
thermostat will start working; the Heat Light Indicator will
turn ON again.
6. First, iron synthetic fabric at low temperature and then as
the temperature rises, iron wool, cotton and linen
accordingly. The iron heats more quickly than it cools.
7. Allow time for iron to heat when changing from a low
temperature to high.
8. Turn OFF and unplug the unit after use.

Produkspesifikasjoner

Merke: Imarflex
Kategori: Stryke
Modell: IR-230RS

Trenger du hjelp?

Hvis du trenger hjelp med Imarflex IR-230RS still et spørsmål nedenfor, og andre brukere vil svare deg